非接触法自动测量薄膜厚度

根据白光等厚干涉原理,基于单片机改造的迈氏干涉仪用于自动测量透明薄膜厚度,采用非接触性测量法。当迈克尔逊干涉仪静镜形成的虚像与动镜相交所成的夹角很小时,在光屏上看到彩色干涉条纹,插入薄膜后,光程差改变,彩纹消失。步进电机带动微调手轮转动,当彩纹再次出现,即可得出透明薄膜厚度。     

壁面结构对非定常薄膜流动表面波特性的影响

采用VOF方法,在入口处引入周期扰动,对沿矩形结构底板下落的二维非定常薄膜流动进行直接数值模拟.计算结果表明,不同频率的外加周期扰动在流场中激发出不同波长的自由表面波.当壁面结构的波长与之相比较小时,由于壁面结构引起的静态波骑行在外加扰动形成的行进波上.若这两个波长相近,非线性效应将促进附近的表面波之间的合并.当薄膜无...     

193 nm氟化物增透膜的特性

 为了研制低损耗、高性能的193 nm氟化物增透膜,研究了基底和不同氟化物材料组合对氟化物增透膜的影响。在熔石英基底上,将挡板法和预镀层技术相结合,采用热舟蒸发方式制备了不同氟化物材料组合增透膜,对增透膜的剩余反射率和光学损耗等光学特性,以及表面粗糙度和应力等特性进行了测量和比较。在分析比较和优化的基础上,设计制备的3层1/4波长规整膜系AlF3/LaF3增透膜在193 nm的剩余反射率低于0.14%,单面镀膜增透膜的透射率为93.85%,增透膜表面均方根粗糙度为0.979 nm,总的损耗约为6％。要得到高性能的193 nm增透膜,应选用超级抛光基底。     

充液型可调焦液态透镜

可调焦液态透镜因具备体积小、成像好、调焦方便等优点而备受瞩目.使用透明的弹性薄膜和光学平板玻璃将一定体积的液体封装在圆柱形的空腔内,当空腔内的液体体积变化时,透镜的曲率半径随之而改变,实现了透镜的可调焦.实验表明,该可调焦液态透镜有较好的成像效果,在一定液体体积变化范围内符合薄透镜成像的规律,在通讯、国防、医疗等方面具...     

Local leakage current behaviours of BiFeO3 films

The leakage current behaviours of polycrystalline BiFeO₃ thin films are investigated by using both conductive atomic force microscopy and current-voltage characteristic measurements. The local charge transport pathways are found to be located mainly at the grain boundaries of the films. The leakage current density can be tuned by changing the post-annealing temperature, the annealing time, the bias voltage and the light illumination, which can be used to improve the performances of the ferroelectric devices based on the BiFeO₃ films. A possible leakage mechanism is proposed to interpret the charge transports in the polycrystalline BiFeO₃ films.     

Effect of substrate temperature on microstructure and optical properties of single-phased Ag20 film deposited by using radio-frequency reactive magnetron sputtering method

Using a radio-frequency reactive magnetron sputtering technique, a series of the single-phased Ag20 films are deposited in a mixture of oxygen and argon gas with a flow ratio of 2：3 by changing substrate temperature （Ts）. Effects of the Ts on the microstructure and optical properties of the films are investigated by using X-ray diffractometry, scanning electron microscopy and spectrophotometry. The single-phased Ag20 films deposited at values of Ts below 200℃ are （111） preferentially oriented, which may be due to the smallest free energy of the （111） crystalline face. The film crystallization becomes poor as the value of Ts increases from 100℃ to 225℃. In particular, the Ag20 film deposited at Ts=225℃ loses the （111） preferential orientation. Correspondingly, the film surface morphology obviously evolves from a uniform and compact surface structure to a loose and gullied surface structure. With the increase of Ts value, the transmissivity and the reflectivity of the films in the transparent region are gradually reduced, while the absorptivity gradually increases, which may be attributed to an evolution of the crystalline structure and the surface morphology of the films.     

Observation of enhanced two-photon absorption in ZnS quantum dots at an ultraviolet wavelength

Two-photon absorption(2PA) in zinc sulphide(ZnS) and Mn2+-doped ZnS quantum dots is reported by the z-scan technique,with nanosecond pulsed laser radiation at 355 nm.The observed values of the 2PA cross section of all the samples are 105 times larger than that of bulk ZnS.     

Characteristics of the crystalline and luminescence properties of a-plane GaN films grown on γ-LiAlO2 （302） substrates

A method of clarifying bioaerosol particles is proposed based on T-matrix. Size and shape characterizations are simultaneously acquired for individual bioaerosol particles by analyzing the spatial distribution of scattered light. The particle size can be determined according to the scattering intensity,while shape information can be obtained through asymmetry factor(AF) . The azimuthal distribution of the scattered light for spherical particles is symmetrical,whereas it is asymmetrical for non-spherical ones,and the asymmetry becomes intense with increasing asphericity. The calculated results denote that the 5 –10 scattering angle is an effective range to classify the bioaerosol particles that we are concerned of. The method is very useful in real-time environmental monitoring of particle sizes and shapes.     

微重力条件下材料气相生长研究进展

本文概述了近二十多年来国外空间气相生长晶体材料及薄膜材料研究工作的进展状况．着重介绍了国外空间气相生长研究的历史过程、研究的主要内容及所采取的研究手段,详细地总结了关于空间气相生长的主要飞行结果,并对国外如何进行数值模拟和实验室模拟等地面准备工作做了较充分的描述．     

MgB2薄膜的制备与特殊性质

本文报道了利用混合物理化学气相沉积方法(HPCVD)在SiC衬底上制备出约150 nm厚,结构均匀的MgB2薄膜.由R~T曲线知道样品TC(0)高达40.1K.由M~T曲线知道其TC=40.4K,且曲线转变十分陡峭.X射线衍射分析表明薄膜具有较好的C轴取向,没有氧污染,却存在Mg的杂峰.由M~H曲线,利用毕恩模型计算得到了5 K零场条件下JC(0T,5K)=2.7×106A/cm2,Hc2=19.5 T.这些结果表明过量的Mg对MgB2薄膜的转变温度以及有些性质有较大的影响.