Nitrogen Dioxide Sensing Properties and Mechanism of Copper Phthalocyanine Film

Copper phthalocyanine film, a p-type organic semiconductor, is synthesized by vacuum sublimation and its surface morphology is characterized by SEM. A silicon-based copper phthalocyanine film gas sensor for NO2 detection is fabricated by MEMS technology. The results show that the resistance and sensitivity of copper phthalocyanine film decrease obviously as the NO2 concentration increases from Oppm to lOOppm. However, the sensitivity nearly keeps a constant of O. 158 between 30 ppm and 70 ppm. The best working temperature of the gas sensor is 90℃ for NO2 gas concentrations of lOppm, 20ppm and 30ppm, which is much lower than that of general metal oxide gas sensor.     

基于薄膜编码超表面的宽频超薄声散射体

该文提出了一种基于薄膜编码超表面的宽频超薄声散射体。利用附加质量块的薄膜和空气腔组成的薄膜结构构建了反射声波相位差接近180°的两种共振单元。将两种共振单元按照一定的顺序进行排列,可以组成深亚波长尺寸下的声学超表面。所构建的声学超表面可以产生宽频有效的散射声场。通过有限元仿真软件对多个频率的近场散射声场分布、远场声指向性和扩散系数进行了仿真计算,仿真结果显示,该散射体可以高效地散射入射声波,并且散射效果在一定的频率范围内是宽频有效的。     

激光溅射沉积制备的ZnO:Ga薄膜表面形貌分析

薄膜表面形貌定量研究有助于薄膜生长机理的认识.研究的薄膜是用激光脉冲沉积法(PLD)制备的ZnO:Ga(GZO)透明导电薄膜.由于GZO薄膜的生长是在远离平衡态情况下实现的,具备自仿射分形特征,可以用高度-高度相关函数进行描述.通过对用原子力显微镜(AFM)获得的表面高度数据进行相关运算,定量地分析了PLD制备的GZO...     

Effect of Sputtering Parameters on Film Composition,Crystal Structure,and Coercivity of SmCo Based Films Deposited on Si （100） Substrates

The sputtering parameter mediated composition （SPMC） effect of 3.0-μm-thick SmCo-based films is experimentally and theoretically studied. The experimental results give a clear indication that the Sm concentration increases with the decreasing sputtering power or with the increasing Ar gas pressure, which are in agreement with the calculated values when the preferential sputtering effect is disregarded. The SPMC effect provides an opportunity for the same composite target to fabricate films with an Sm concentration varying from 13.8at.% to 17.3at.%, which is reasonable for the magnetic phase transformation （Sm2Co17→SmCo7→SmCo5） and the enhanced coercivity.     

Preparation of high performance thin-film polarizers

<正>The optical performance of thin film polarizers is highly sensitive to the layer thicknesses of thin film.The thicknesses of the sensitive layers are optimized in order to gain broader polarizing zone in such case when the total layer thickness does not increase.An automatic layer thickness control system is established,and errors caused by different monitoring methods are analyzed.With this thickness control system,thin-film polarizers with T_p higher than 98%and T_p/T_s higher than 200:1(T_p and T_s are transmissions for p- and s-polarizations,respectively) with the bandwidth of 11 nm are prepared.Using the system allows for optimum repeatability of three successive runs.     

LOCAL BENDING OF THIN FILM ON VISCOUS LAYER

Effects of deposition layer position film are systematically investigated. Because the and number/density on local bending of a thin deposition layer interacts with the thin film at the interface and there is an offset between the thin film neutral surface and the interface, the deposition layer generates not only axial stress but also bending moment. The bending moment induces an instant out-of-plane deflection of the thin film, which may or may not cause the socalled local bending. The deposition layer is modeled as a local stressor, whose location and density are demonstrated to be vital to the occurrence of local bending. The thin film rests on a viscous layer, which is governed by the Navier-Stokes equation and behaves like an elastic foundation to exert transverse forces on the thin film. The unknown feature of the axial constraint force makes the governing equation highly nonlinear even for the small deflection chse. The constraint force and film transverse deflection are solved iteratively through the governing equation and the displacement constraint equation of immovable edges. This research shows that in some special cases, the deposition density increase does not necessarily reduce the local bending. By comparing the thin film deflections of different deposition numbers and positions, we also present the guideline of strengthening or suppressing the local bending.     

Thin Film Flow of a Second Grade Fluid over a Stretching/Shrinking Sheet with Variable Temperature-Dependent Viscosity

Effects of variable viscosity on the flow and heat transfer in a thin film on a horizontal porous stretching sheet are analyzed. The steady boundary layer equations for momentum and thermal energy are simplified by using similarity transformations. The resulted and coupled nonlinear differential equations are solved by Homotopy analysis method. The results are presented graphically to interpret various physical parameters appearing in the problem.     

光纤腔耦合碳化硅薄膜的理论计算

半导体材料中的自旋色心是量子信息处理的理想载体,引起了人们的广泛兴趣.近几年,研究发现碳化硅材料中的双空位、硅空位等色心具有与金刚石中的氮-空位色心相似的性质,而且其荧光处于更有利于光纤传输的红外波段.然而受限于这类色心的荧光强度和谱线宽度,它们在量子密钥分发和量子网络构建等方面的实际应用依然面临严峻的挑战.利用光学腔耦合自旋色心实现荧光增强和滤波将能有效地解决这些难题.将光纤端面作为腔镜,并与自旋色心耦合可以实现小模式体积的腔耦合,而且天然地避免了需要再次将荧光耦合进光纤而造成损耗的缺点.本文理论计算了耦合碳化硅薄膜的光纤腔的性质和特征.首先通过优化各项参数包括薄膜表面粗糙度、腔镜反射率等,理论分析了存在于光纤腔中的不同模式的特点,以及光纤腔耦合色心的增强效果及相关影响因素.进一步地研究了对开放腔而言最主要的影响因素—振动对腔性质、色心的增强效果以及耦出效率的影响,最终得到在不同振动下的最大增强效果以及对应的耦出透射率.这些结果为今后光纤腔耦合色心的实验设计提供了最直接的理论指导,为实验的发展和优化指明了方向.