Use of Radioactive Tracers for Studies on Fluidized Cracking Catalytic Plants

In this paper are described the experiments carried out with radioactive tracers on Fluidized Cracking Catalytic (F.C.C.) plants. The tracers used are ⁴¹Ar and ⁷⁹Kr for gas and ¹⁴⁰La for the catalyst. Results obtained on different parts of the F.C.C. plant are given.     

Accuracy of the random-incidence scattering coefficient measurement

The experimental results presented in this study aim at providing an useful insight into the accuracy of the measurement procedure of the random-incidence scattering coefficient as defined in ISO 17497-1:2004. A systematic experimental investigation has been conducted in a full-scale reverberation room. The tested diffusers are characterized by different geometrical distributions of hollow wooden cubes with an edge length of 20 cm, and different configurations of the measurement set-up. The accuracy of the measurement results has been evaluated considering the contribution of the different undefined aspects of the ISO method such as the microphones height, the air gap underneath the turntable, the sample shape, and the correction of the effects of the absorption and scattering coefficients of the base plate. The results showed that the accuracy of the measurement increases when a more rigid turntable and a circular sample are used, and when the air gap below the turntable is covered. Furthermore, the distance of the microphones from the sample surface was found to affect significantly the results, thus to influence the accuracy of the measurements.     

ERP与ISO的结合与集成实施

ERP和ISO9000的一体化结合是一个值得重视的研究课题.文中首先分析了ERP和ISO9000的对应点,指出两者可以相互支撑.最后,探讨了两者的集成实施问题.     

Summary of ISO/TC 201 Standard: XXX. ISO 18516: 2006—Surface chemical analysis—Auger electron spectroscopy and X‐ray photoelectron spectroscopy—Determination of lateral resolution

This International Standard describes three methods for measuring the lateral resolution achievable in Auger electron spectrometers and X‐ray photoelectron spectrometers under defined settings. The straight‐edge method is suitable for instruments where the lateral resolution is expected to be larger than 1 µm. The grid method is suitable if the lateral resolution is expected to be less than 1 µm but more than 20 nm. The gold‐island method is suitable for instruments where the lateral resolution is expected to be less than 50 nm. The standard contains three informative annexes that provide illustrative examples of measurements of lateral resolution. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparison of different statistical methods for evaluation of proficiency test data

In analytical chemistry, proficiency testing usually consists in tests that laboratories conduct under routine conditions and report the result to the PT provider who then converts the result to a score which helps the participant to assess the accuracy of the result. The aim of this work is to show PT providers, accreditations bodies, and participating laboratories that different scoring results can be achieved depending on the evaluation system selected. The influence of different evaluation techniques on the results of an interlaboratory comparison for determination of gold in precious metals alloys was investigated. Results from 19 participating laboratories were evaluated by means of the three procedures: (1) classical statistical approach—outliers detection; (2) robust methods—(2A) robust procedure and (2B) ISO 13528; and (3) fitness for purpose. Evaluation of the same PT data revealed very interesting issues depending on the different scoring systems that were used and the robustness of the statistical methods used for detecting outliers. As a general rule, laboratories with scoring Z > 2 offered clearly poorer performance in robust approaches than classical ones. In order to support this first evidence, we evaluated a second data set with results from 24 laboratories (mercury from soil samples) by means of the four mentioned approaches. Selection and comparison of different scoring systems must be done very carefully, because sometimes they are not the best approach for studying the data population or the more appropriate one for evaluating the distribution of the data. Finally it should be taken into account that sometimes the robust scoring systems are not always suitable for evaluating the results of some PT schemes.     

Application of Radioactive Tracers to Some Processes on a Large Scale

Methods of using the radioactive tracers for study of processes running in a big industrial scale, and methods of results interpretation are discussed. Investigations carried out for a wastewater treatment plant, a phosphoric acid production plant, and a steam calciner are presented.     

The Decay of 140La to Levels in 140Ce

The decay of ¹⁴⁰La to levels in ¹⁴⁰Ce has been studied in detail using a GMX-Ge and Hp-Ge coincidence spectrometer. Singles gamma-ray spectra as well as gamma-gamma coincidence were carried out to determine some γ-transitions and to insure others. Energies and relative intensities of 36 γ-transitions in the range from 26 to 3319 keV have been measured. The doubted γ-lines 936.7, 1087.9, 1303.5, 1404.2, 1415.3 and 2533.4 keV were confirmed, while other ones at 798.3, 902.0, 907.0, 1521.8 and 2494.0 keV were not observed. The two γ-lines at 1924 and 2082 keV which were a source of large discrepancies in the previous studies are confirmed in the present work to be sum peaks. Special care was paid in identifying the weak γ-transitions 936.7, 1087.9, 1415.3 and 2533.4 keV.

Es wurde der Zerfall von ¹⁴⁰La in Energienivcaus des ^l40Ce unter Verwendung eines GMX-Ge und Hp-Ge-Koinzidenzspeklrometers untersucht. Es werden einzclne Gammaspektren r und Gamma-Gamma-Koinzidenzen aufgenommen, um einige Gamma-Übergänge zu bestimmen und andere abzusichern. Die Energien und die relativen Intcnsitäten von 36 Gamma-Übergangen im Bereich von 26 … 3319 keV wurden vermessen. Die unsicheren Gamma-Linien 936,7, 1087,9, 1303,5, 1404,2, 1415,3 und 2533,4 keV wurden bestätigt, während die Linien 798,3, 902,0, 907,0, 1521,8 und 2494,0 keV nicht beobachtet werden konnten. Die zwei Gamma-Linien bei 1924 und 2082 keV, die eine Quclle groβer Unstimmigkeiten in früheren Untersuchungen gewesen sind, konnten als Summenpeaks bestätigt werden. Besondere Beachtung wurde der Zuordnung der schwachen Gamma-Übergange bei 936,7, 1087,9, 1415,3 und 2533,4 keV geschenkt.     

The validation of methods for regulatory purposes in the control of residues

The topic of validation is diversified. This review outlines the validation strategies which can be found in national, international and supranational regulations, compares them with one another and aims to elaborate on the main principles. European regulations and legislation, Codex alimentarius guidelines, the official methods program of the AOAC, and naturally the relevant ISO standards, particularly the ISO 5725 series, are taken into consideration. The objective of every validation is to demonstrate fitness for purpose. This varies of course in its characteristics for the diverse uses. However, all approaches have in common the objective of harmonisation of food control by using effective and reliable methods. To this end, criteria are determined and validation models developed and made compulsory. ISO 5725 is the central basis for validations for quantitative methods with its validation specifications through method collaborative studies. On the contrary, there are no valid uniform international method specifications for qualitative methods. Collaborative studies are in opposition to single-lab-validations with different sources of error. Whereas laboratory errors are predominant in collaborative studies, the single-lab-validation or in-house validation concentrates particularly on time and processing errors (intermediate precision). In new statistical models for in-house validations, the matrix mismatch error is also considered. The validation models presented here are of a general nature and can be used in principle for all analytical methods. Correct and appropriate statistical modelling is very important.