微波消解ICP-MS测定鲜竹笋中7种微量元素

建立同时检测鲜竹笋中铬、铜、锌、砷、镉、汞、铅等7种元素的分析方法。竹笋样品在硝酸介质中经微波消解,用电感耦合等离子体质谱(ICP-MS)检测,全定量法采集数据。校准曲线线性良好,相关系数在0.9937—1.0000之间;检出限为0.005—0.202μg/L;加标回收率在88.96%—110.5%;精密度RSD小于6.09%;国家标准样品西红柿叶(GSBZ51001-94)中几种元素的测定值都在标准范围内。该方法具有灵敏、可靠、快速、准确等优点,适用于竹笋中微量元素的分析测定。     

Chitosan functionalized with di-2-propanolamine: Its application as solid phase extractant for the determination of germanium in water samples by ICP-MS

Cross-linked chitosan was chemically modified with di-2-propanolamine via an arm of chloromethyloxirane (CCTS-DPA resin). The adsorption behavior of the resin towards 62 elements was examined using a mini-column pretreatment method, and the collected elements were eluted with 1 mol L^− 1 nitric acid before measurement by inductively coupled plasma-mass spectrometry (ICP-MS).The CCTS-DPA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. However, di-2-propanolamine (DPA) attached to cross-linked chitosan (CCTS) showed excellent ability and selectivity for the adsorption of germanium at pH 6 to 9. The adsorption capacity of the resin for germanium (IV) was found to be 106 mg g^− 1 resin, whereas the adsorption rate constant was 9.82 × 10^− 2 min^− 1. Through the column treatment, alkali and alkaline earth matrices in river water and seawater matrices could be completely removed. The resin can also successfully remove chloride and selenium that can interfere with the direct determination of germanium by ICP-MS. The applicability of the CCTS-DPA resin was further demonstrated for the collection/preconcentration of germanium in environmental water samples and its determination by ICP-MS. The concentrations of germanium in tap water, river water and seawater samples were found in the range of 0.011 to 0.022 μg L^− 1.     

Determination of seven arsenic species in seafood by ion exchange chromatography coupled to inductively coupled plasma-mass spectrometry following microwave assisted extraction: method validation and occurrence data

The determination of seven arsenic species in seafood was performed using ion exchange chromatography on an IonPac AS7 column with inductively coupled plasma mass spectrometry detection after microwave assisted extraction. The effect of five parameters on arsenic extraction recoveries was evaluated in certified reference materials. The recoveries of total arsenic and of arsenic species with the two best extraction media (100% H₂O and 80% aqueous MeOH) were generally similar in the five seafood certified reference materials considered. However, because MeOH co-elutes with arsenite, which would result in a positively biased arsenite concentration, the 100% H₂O extraction conditions were selected for validation of the method. Figures of merit (linearity, LOQs (0.019-0.075 mg As kg⁻¹), specificity, trueness (with recoveries between 82% (As(III)) and 104% (As(V) based on spikes or certified concentrations), repeatability (3-14%), and intermediate precision reproducibility (9-16%) of the proposed method were satisfactory for the determination of arsenite, monomethylarsonic acid, dimethylarsinic acid, arsenate, arsenobetaine and arsenocholine in fish and shellfish. The performance criteria for trimethylarsine oxide, however, were less satisfactory. The method was then applied to 65 different seafood samples. Arsenobetaine was the main species in all samples. The percentage of inorganic arsenic varied between 0.4-15.8% in shellfish and 0.5-1.9% at the utmost in fish. The main advantage of this method that uses only H₂O as an extractant and nitric acid as gradient eluent is its great compatibility with the long-term stability of both IEC separation and ICP-MS detection.     

Determination of Bromine in Human Serum by Inductively Coupled Plasma-Mass Spectrometry

Abstract

The determination of bromine in human serum by inductively coupled plasma-mass spectrometry (ICP-MS) is discussed. Sample preparation was kept as limited as possible: serum samples were only diluted with nitric acid (five- or ten-fold). Indium was added as internal standard. In order to avoid overlap of ⁴⁰Ar ⁴⁰Ar with     

Elemental Analyses Using Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) of Geological Samples Fused with Li2B4O7 and Calibrated Without Matrix-Matched Standards

 Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used as a complementary technique to X-ray fluorescence (XRF), for multi-element analysis of geological samples fused with lithium-tetraborate Li₂B₄O₇). Different calibration strategies using external non-matrix matched reference materials were investigated. Various internal standards were tested, including the use of Li from the flux, and the use of the naturally occurring internal standards, Si or Ca. The use of a naturally occurring standard is not as efficient as this required a prior analysis of the samples using XRF. The obtained values for the analysis of geological reference materials were compared with consensus literature values, and satisfactory agreement was found. Laser pits, which were formed, had a diameter of 80 μm and 3–5 replicates on each fused disc were measured. The reproducibility of the method was better than 10% for concentrations above 1 μg/g and better than 15% for lower concentrations. The use of Li as the internal standard offers the possibility of multi-element determinations in geological samples, which have an unknown composition when the laser ablation analysis is carried out. However, using the calculated stoichiometric composition of the lithium-tetraborate for the calculation of the Li concentration leads to a constant deviation from the recommended values. Therefore, it was necessary to determine the Li concentration within each sample batch using at least one lithium tetraborate fused geological reference material. This resulting Li concentration in the beads was then used for all subsequent samples in a run. Limits of detection, reproducibility, deviation from reference values indicate the potential of LA-ICP-MS for such bulk analysis without matrix matched calibration standards.     

OFFGEL isoelectric focusing and polyacrylamide gel electrophoresis separation of platinum-binding proteins

In this work a 2D electrophoretic separation procedure able to maintain the integrity of platinum-protein bonds has been developed. The method is based on the use of sequential OFFGEL isoelectric focussing (IEF) and PAGE. A systematic study of the reagents used for PAGE, for OFFGEL-IEF separation, and post-separation treatment of gels (such as enzymatic digestion and sample preparation for MS analysis) was tackled regarding their suitability for the identification of platinum binding proteins using standard proteins incubated with cisplatin. The distribution of platinum in high and low molecular weight fractions (separated by cut-off filters) was determined by ICP-MS, which allows evaluating platinum-protein bond stability under the conditions studied. SDS-PAGE in the absence of β-mercaptoethanol or dithiotreitol preserved the platinum-protein bonds. In addition, neither the influence of the electric field during the electrophoretic separation, nor the processes of fixing, staining and destaining of proteins in the gel did result in the loss of platinum from platinum binding proteins. SDS-PAGE under non-reducing conditions provides separation of platinum-binding proteins in very narrow bands with quantitative recoveries. Different amounts of platinum-bound proteins covering the range 0.3-2.0 μg were separated and mineralised for platinum determination, showing good platinum linearity. Limits of detection for a mixture of five standard proteins incubated with cisplatin were between the range of 2.4 and 13.9 pg of platinum, which were satisfactory for their application to biological samples. Regarding OFFGEL-IEF, a denaturing solution without thiourea and without dithiotreitol is recommended. The suitability of the OFFGEL-IEF for the separation of platinum binding proteins of a kidney cytosol was demonstrated.     

Contents of heavy metals in lotus seed from REEs mining area

At rare earth mining area, the pollution of heavy metals has been paid little attention. In lotus seeds and soil samples sampled from a typical rare earth elements mining area were detected the contents of eight kinds of heavy metals (Cr, Mn, Cu, Zn, As, Cd, Hg and Pb) to investigate the pollution from rare earth elements mining by ICP-MS (Inductively Coupled Plasma Mass Spectrometry). The results showed that the contents of the heavy metals Cr, Mn, Cu, Zn, As, Cd, Hg and Pb in lotus seeds were 0.25, 86.94, 8.32, 19.76, 0.13, 0.08, 0.01, and 0.20 μg/g in lotus seeds, respectively, and corresponding contents in soil were 27.68, 168.71, 20.23, 47.16, 1.83, 0.13, 0.04, and 23.15 μg/g. These data showed that the contents of heavy metals in lotus seeds from REEs mining area are no higher than reference area and meet national food safety standards of China.     

ICP-OES和ICP-MS测定中日两国大米中27种矿质元素含量

收集了16种中国大米和11种日本大米,经过微波消解或干灰化法处理后,采用电感耦合等离子体发射光谱法(ICP-OES)和电感耦合等离子体质谱法(ICP-MS)测定了其中Al,As,B,Ba,Ca,Cd,Co,Cr,Cs,Cu,Fe,Hg,K,Mg,Mn,Mo,Na,Ni,P,Pb,Rb,S,Se,Sr,Tl,V和Zn等27种矿质元素的含量,并用生物标准参考物质大米(GBW10010)评价了分析方法的准确度。研究结果表明,基于碰撞反应池技术(CCT)的ICP-MS能有效降低一些多原子离子对低m/z元素离子计数的干扰;与日本大米相比,中国大米中Al,S,Sr等元素含量显著偏高,而B,Cd,Cs,Mg,Mo,P,Pb,Zn等元素含量显著偏低(P0.05),采用聚类分析(最小方差法)对矿质元素含量进行处理,可正确判别两国大米。另外,还发现大米中Mg和P含量之间存在很强的线性相关性,相关系数高达0.9552。     

ICP-MS测定污水中银的含量

研究了ICP-MS测定污水中银的含量,其方法检出限为0.05μg/L,方法精密度RSD为1.91%—2.32%,加标回收率为98.0%—102.4%,方法简单、快速。     

In Vitro Evaluation of Antiproliferative Properties of Novel Organotin(IV) Carboxylate Compounds with Propanoic Acid Derivatives on a Panel of Human Cancer Cell Lines

The synthesis of novel triphenyltin(IV) compounds, Ph₃SnLn (n = 1–3), with oxaprozin (3-(4,5-diphenyloxazol-2-yl)propanoic acid), HL1, and the new propanoic acid derivatives 3-(4,5-bis(4-methoxylphenyl)oxazol-2-yl)propanoic acid, HL2, and 3-(2,5-dioxo-4,4-diphenylimidazolidin-1-yl)propanoic acid, HL3, has been performed. The ligands represent commercial drugs or their derivatives and the tin complexes have been characterized by standard analytical methods. The in vitro antiproliferative activity of both ligands and organotin(IV) compounds has been evaluated on the following tumour cell lines: human prostate cancer (PC-3), human colorectal adenocarcinoma (HT-29), breast cancer (MCF-7), and hepatocellular cancer (HepG2), as well as on normal mouse embryonic fibroblast cells (NIH3T3) with the aid of MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-12 diphenyltetrazolium bromide) and CV (crystal violet) assays. Contrary to the inactive ligand precursors, all organotin(IV) carboxylates showed very good activity with IC₅₀ values ranging from 0.100 to 0.758 µM. According to the CV assay (IC₅₀ = 0.218 ± 0.025 µM), complex Ph₃SnL1 demonstrated the highest cytotoxicity against the caspase 3 deficient MCF-7 cell line. Inductively coupled plasma mass spectrometry (ICP-MS) analysis indicated a two-fold lower concentration of tin in MCF-7 cells in comparison to platinum. To investigate the mechanism of action of the compound Ph₃SnL1 on MCF-7 cells, morphological, autophagy and cell cycle analysis, as well as the activation of caspase and ROS/RNS and NO production, has been performed. Results suggest that Ph₃SnL1 induces caspase-independent apoptosis in MCF-7 cells.