Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Silver (I)-promoted asymmetric halohydrin reaction of chiral N-enoyl-2-oxazolidinones: scope and limitations

The halohydrin reaction of chiral N-enoyl-2-oxazolidinones 1 by halogen (Br₂/I₂) and water were efficiently carried out in aqueous organic solvent promoted by silver(I) with high anti- and regioselectivity and moderate to good diastereoselectivities. The alkenoyl, cinnamoyl and electron-deficient cinnamoyl substrates smoothly underwent bromohydrin reaction in aqueous acetone but no iodohydrin reaction, where as electron-rich cinnamoyl substrates preferred to undergo iodohydrin reaction in aqueous acetone with moderate diastereoselectivity and enhanced diastereoselectivity was observed in aqueous THF.     

Polymorphism in mercury(I) selenite(IV): preparation, crystal structures of α-, β-and γ-Hg2SeO3, and thermal behavior of the α- and β-modification

Mercury(I) selenite(IV) is polymorphic and crystallizes at least in three modifications, named α-, β-and γ-Hg₂SeO₃. Polycrystalline β-Hg₂SeO₃ was prepared by precipitation of a concentrated mercurous nitrate solution with selenous acid. Hydrothermal treatment of the colorless β-Hg₂SeO₃ powder in demineralized water at 250°C (10 days) yields light-yellow single crystals of α-Hg₂SeO₃ which show the highest density of the three modifications. Colorless needle-shaped single crystals of β-Hg₂SeO₃ and very few single crystals of γ-Hg₂SeO₃ co-crystallize from strongly diluted Hg₂(NO₃)₂ and H₂SeO₃ solutions and were grown by a diffusion technique. All crystal structures were solved and refined from single crystal diffractometer data sets and are based on Hg₂²⁺ dumbbells and trigonal pyramidal SeO₃²⁻ anions as the main building units. A common structural feature of all modifications is the formation of open channels extending parallel to the shortest crystallographic axis. The non-bonding orbitals of the Se^IV atoms are stereochemically active and protrude into the channels. Upon heating in an open system under N₂ atmosphere, both α- and β-Hg₂SeO₃ decompose in a well-separated three-step mechanism. The first step (T > 250°C) involves disproportionation into elementary mercury and α-HgSeO₃ which at ca. 400°C subsequently transforms into β-HgSeO₃. The second step between T = 400 and 500°C is accompanied by a loss of Hg and SeO₂ and the formation of the basic salt Hg₃SeO₆. In the third step, at temperatures between T = 500° and 600°C, this material decomposes completely. Upon heating in a closed system (sealed silica capillaries), β-Hg₂SeO₃ transforms between 320-340°C into the more dense α-Hg₂SeO₃ which on further heating likewise converts into elementary mercury and β-HgSeO₃.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Determining the chromophore in the amylopectin–iodine complex by theoretical and experimental studies

A partial hydrolysis of amylose followed by the addition of iodine provides a spectrum almost identical to that of the amylopectin–iodine (API) complex suggesting the involvement of smaller “amylose-like” units in the API complex. Our theoretical studies on different polyiodine and polyiodide species suggest that a nearly linear I₄ unit stabilized within the cavity of a small “amylose-like” helix is responsible for the characteristic API spectrum. Since there are 2.75 anhydroglucose residues (AGU) for every iodine atom in the amylose–iodine (AI) complex and a structural similarity exists between the API and the AI (amylose–iodine) complexes, we identify (C₆H₁₀O₅)₁₁I₄ to be the chromophore in the API complex. © 1994 John Wiley & Sons, Inc.     

Some Tris[(triorganophosphine)gold(I)]-oxonium and -Organoimonium Tetrafluoroborates with Bulky Substituents

Tris{[tri(2-methylphenyl)phosphine]gold(I)}-, tris{[tri(2,4,6-trimethylphenyl)phosphine]gold(I)}- and tris{[tri(cyclohexyl)phosphine]gold(I)}-oxonium tetra-fluoroborate ( 1?3 ) have been prepared from the corresponding (phosphine)gold(I) chlorides, silver oxide, and sodium tetrafluoroborate in acetone. These oxonium salts are excellent aurating agents for primary amines. Thus in the reaction with 1, t -butylamine ^tBuNH₂ and aniline PhNH₂ are readily converted into the tri nuclear imino complexes {[(2-MeC₆H₄)₃P]Au}₃N^tBu⁺BF₄^? ( 4 ) and {[(2-MeC₆H₄)₃P]Au}₃NPh⁺BF ( 5 ) in high yields. With 3 , both aniline and 8-amino-quinoline also give the tri nuclear complexes, i.e. {[(c-C₆H₁₁)₃P]Au}₃ NPh⁺BF ( 6 ) and {[(c-C₆H₁₁)₃P]Au}₃N(C₉H₆N)⁺BF ( 7 ). Auration of aniline with the most sterically hindered reagent 2 yields only the bi nuclear complex {[2,4,6-Me₃C₆H₂)₃P] · Au}₂N(Ph)H⁺BF ( 8 ). The reagents 1?3 and the Products 4 – 8 have been characterized by analytical and NMR spectroscopic data, and the crystal structures of compounds 4 and 6 have been determined by single crystal x-ray diffraction. In the cations of 4 , a triangle of gold atoms with short Au — Au contacts [3.036(1), 3.107(1), and 3.214(1) Å] forms a steep pyramid with the nitrogen atom, in which the angles Au? N? Au are all much smaller than the tetrahedral standard of 109.7°: 94.8(4), 98.1(4), and 103.0(4)°. This triangular Au₃ unit is staggered relative to the three methyl groups of the ^tBu substituent at nitrogen. The results for 6 are similar [Au — Au: 3.037(1), 3.071(1), and 3.222(1) Å; Au? N? Au: 95.3(3), 96.5(3), and 103.6(3)°]. Variable temperature NMR studies of compounds 3 and 8 show hindered rotation of the mesityl groups about the P? C bonds of the ligands originating from the steric congestion within each tertiary phosphine.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

Chemistry of polyfunctional molecules-123. Reactions of BiBr3, SbI3 and AsI3 with LiN(PPh2)2; X-ray structure of a cyclophosphazene salt containing arsenic(I)

BiBr₃ or SbI₃ react at 20°C with LiN(PPh₂)₂ (1) to give elementary Bi or Sb and the P---P coupled phosphazene ligand Ph₂P---N=PPh₂---PPh₂=N---PPh₂ (2). The reaction of AsI₃ with 1 at room temperature formed yellow needles of the eight-membered heterocycle (3), whereas AsI₃ interacted at 80°C with 1 in the molar ratio of 1:3 to give elementary arsenic and 2. Treatment of AsI₃ and 1 at 20°C in a 1:2 stoichiometry yielded the seven-membered, cyclic arsenium(I) salt

Full-size image

I·4THF (5·4THF), which was characterized by elemental analysis, conductivity, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis.