Novel rhenium(III) complexes with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine: X-ray structures and DFT calculations for [ReCl3(OPPh3)(dppt)] and [ReCl3(PPh3)(dppt)] complexes

The reaction of [ReOCl₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReCl₃(OPPh₃)(dppt)] has been obtained. The triphenylphosphine oxide can be easily replaced by PPh₃ in the reaction of [ReCl₃(OPPh₃)(dppt)] with an excess of triphenylphosphine. The [ReCl₃(OPPh₃)(dppt)] and [ReCl₃(PPh₃)(dppt)] complexes have been structurally and spectroscopically characterized. Their molecular orbital diagrams have been calculated with the density functional theory (DFT) method, and their electronic spectra have been discussed on the basis of time-dependent DFT calculations. The compound [ReCl₃(OPPh₃)(dppt)] has been studied additionally by magnetic measurement. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.     

A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

Synthesis and characterization of [Cu(Phca2en)(PPh3)X] (X=Cl, Br, I, NCS, N3) complexes: crystal structures of [Cu(Phca2en)(PPh3)Br] and [Cu(Phca2en)(PPh3)I]

New mixed-ligand copper(I) complexes, [Cu(Phca₂en)(PPh₃)X], [Phca₂en = N,N′-bis(β-phenylci-nnamaldehyde)-1,2-diiminoethane and X=Cl (1), Br (2), I (3), NCS (4), N₃ (5)] have been synthesized and characterized by various techniques. ¹H and ¹³C-NMR and IR spectral data of these copper(I) complexes are compared with the free ligand to elucidate some structural features. The structures of [Cu(Phca₂en)(PPh₃)Br] (2) and [Cu(Phca₂en)(PPh₃)I] (3) have been determined from single-crystal data showing that the coordination geometry around copper atom is a distorted tetrahedron. Furthermore, these Cu(I) complexes exhibit supramolecular motifs of the type multiple phenyl embraces resulting from attractive interactions between phenyl rings of PPh₃ moieties. The presence of the C–H…Cu weak intramolecular hydrogen bonds, due to the trapping of C–H bonds in the vicinity of the metal atoms, is also reported.     

工作用玻璃液体温度计温度修正值的测量不确定度分析

依据JJF1059－1999，利用二等水银湿度计标准装置，分析了工作用玻璃液体温度计温度修正值的测量不确定度。当温度测量点为20℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.054℃，当温度测量点为95℃时，工作用玻璃液体温度计温度修正值的扩展不确定度为0.055℃。     

Conformational studies of basic poly (α-amino acid)s in reversed micelles

The conformation of various basic poly (-amino acid)s was investigated by CD measurements in aqueous solutions containing bis (2-ethylhexyl)sodium sulfosuccinate (AOT) as well as in the AOT reversed micelles. The addition of AOT into an aqueous solution of poly(L-lysine) induces the conformational transition from coil to ordered structure, followed by aggregation. On the other hand, poly(L-lysine) assumes-structure in the reversed micelles at low w_ovalue (w_o=[H₂O]/[AOT]). Similarly to poly(L-lysine), poly(L-ornithine) takes an ordered structure in the aqueous solution containing AOT and-structure in the reversed micelles. In this case, however, these ordered structures are not so stable, compared with that of poly(L-lysine). Poly(L-arginine) undergoes the conformational transition from coil to helix by addition of AOT into the aqueous solution. Further addition of AOT allows transformation into-structure. Copoly(L-lysyl-L-leucine) with 63% leucine residue was shown to take a stable helical conformation even in pure water. In the reversed micelles, however, this ordered structure is significantly changed probably because the hydrophobic interaction among the leucyl residues is lowered in the reversed micelles.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany     

Synthesis and Characterization of (βDiketonate)(7-norbornadienyl acetate)Copper(l) Complexes,Single-Crystal Structure of (hfac)Cu(7-AcO-NBD)

Copper(I) complexes of general formula (β-diketonate)Cu(7-AcO-NBD), where 7-AcO-NBD = 7-norbornadienyl acetate and β-diketonate = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate (1), 1,1,1-trifluoro-2,4-pentanedionate (2), 2,4-pentanedionate (3), 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionate (4), 4,4,4-trifluoro-1-phenyl-1,3-butanedionate (5), were prepared from reactions of CuCl with Na(β-diketonate) in the presence of 7-AcO-NBD. AH compounds were characterized by elemental analyses, ¹H, ¹³C, ¹⁹F NMR and IR spectra. Single-crystal strucutre of compound 1 was determined by X-ray diffraction analysis that showed a mononuclear copper species with coordination of a chelating β-diketonate ligand through two oxygen atoms and the 7-AcO-NBD through its C? C double bond and an oxygen atom in the solid state. For compound 1, the crystal data are: triclinic, space group $ {\rm P}\bar 1 $, a= 5.4519(14) Å, b= 11.852(3) Å, c= 13.304(3) Å, α = 74.721(20)° β = 80.220(20)°, γ= 76.848(19)°, Z = 2, R_F = 0.060 and R_w = 0.064. Hot-wall chemical vapor deposition experiments revealed that compound 1 is suitable as a precursor for deposition of copper films in the temperature range 170–260 °C.     

Rhodium(I) catalyzed four-component reaction of Fischer alkenyl carbene complexes and 1,1-diphenylallene

Alkyl substituted chromium Fischer carbene complexes react with 1,1-diphenylallene in the presence of rhodium(I) catalysts (10 mol%) to yield highly substituted dienyl indenone derivatives. In this process a catalytic chromium(0)-rhodium(I) exchange occurs, four new C-C bonds are created, and four-components (two allenes, the carbene ligand and one CO ligand) are joined in a chemo- and regioselective manner.