Use of hydrogen peroxide to achieve interference-free stripping voltammetric determination of copper at the bismuth-film electrode

In this work, a new approach is presented to allow interference-free determination of Cu (II) by stripping voltammetry using the bismuth-film electrode. The addition of hydrogen peroxide to the electroanalytical cell has promoted complete resolution between re-dissolution peaks of Bi (III) and Cu (II). The absence of interference could be evaluated by the correlation coefficient (r > 0.99) between Cu (II) concentration and its shifted current peak (at +212 mV) while achieving a slightly fluctuation of the bismuth current peak at −180 mV. Studies were performed aiming towards the optimum conditions for trace determination of Cu (II) using hydrogen peroxide. The methodology was applied to a real sample (sugarcane spirits) and the results were compared to those from graphite furnace atomic absorption spectrometry. The analytical parameters of merit and the results of the analysis indicated that the analytical methodology could be readily used for trace determination of Cu (II).     

A Mixed Solvothermal Route to Synthesis of Dice‐Like PbS

The authors developed a simple solvothermal route to synthesis of PbS nanocrystals in the mild binary mixed solvent made of diethylenetriamine (DETA) and water. Two kinds of PbS nanostructures (dice‐like and cubic) have been successfully synthesized in the binary mixed solvothermal system at 150 °C by changing the sulfur source. The products were characterized by X‐ray diffraction (XRD), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The results show that the as‐prepared dice‐like PbS crystals have a hole on each of their faces. To elucidate the relationship between reaction systems and the morphologies of the final products, the authors also investigated the crystal growth by using different sulfur source. Based on the experimental results, the possible growth mechanism of the dice‐like PbS crystals was proposed.     

Interpolymer complexation in hydrolysed poly(styrene-co-maleic anhydride)/poly(styrene-co-4-vinylpyridine)

Complexation between hydrolysed poly(styrene-co-maleic anhydride) (HSMA) copolymers containing 28% and 50% maleic anhydride and a poly(styrene-co-4-vinylpyridine), St4VP32 copolymer with 32% of 4-vinylpyridine content has been investigated. Formation of interpolymer complexes from 1,4-dioxane solutions is observed, over the entire composition range and the stoichiometry of these complexes has been determined from elemental analysis.Quantitative FTIR study of the system HSMA50/StV4Py32 shows that the ideal complex composition leads to 2:1 unit mole ratio of interacting component. FTIR results are in good agreement with DSC and TGA ones, since this complex composition gives the maximum value of the glass transition temperature and the best thermic stability.For the systems investigated, the T_g versus composition curve do not follow any of the commonly accepted models proposed for polymer blends. A new model proposed by Cowie [Cowie JMG, Garay MT, Lath D, McEwen IJ. Br Poly J 1989;21:81] is used to fit the T_g data and found to reproduce the experimental results more closely.     

Oligonucleotide Analogues with Integrated Bases and Backbone

The thiomethylene‐linked U*[s]U⁽*⁾ dimers 9 – 14 were synthesized by substitution of the 6‐[(mesyloxy)methyl]uridine 6 by the thiolate derived from the uridine‐5′‐thioacetates 7 and 8 followed by O‐deprotection. Similarly, the thiomethylene‐linked A*[s]A⁽*⁾ dimers 9 – 14 were obtained from the 8‐(bromomethyl)adenosine 15 and the adenosine‐5′‐thioacetates 16 and 17 . The concentration dependence of both H? N(3) of the U*[s]U⁽*⁾ dimers 9 – 14 evidences the formation of linear and cyclic duplexes, and of linear higher associates, C(8 or 6)CH₂OH and/or C(5′/II)OH groups favouring the formation of cyclic duplexes. The concentration dependence of the chemical shift for both H₂N? C(6) of the A*[s]A⁽*⁾ dimers 18 – 23 evidences the formation of mainly linear associates. The heteroassociation of U*[s]U⁽*⁾ to A*[s]A⁽*⁾ dimers is stronger than the homoassociation of U*[s]U⁽*⁾ dimers, as evidenced by diluting equimolar mixtures of 11 / 20 and 13 / 22 . A 1 : 1 stoichiometry of the heteroassociation is evidenced by a Job's plot for 11 / 20 , and by mole ratio plots for 9 / 18, 10 / 19, 12 / 21, 13 / 22 , and 14 / 23 .     

Oligonucleotide Analogues with Integrated Bases and Backbones. Part 19.

The A*[s]U⁽*⁾ dinucleosides 1 and 2 form thermoreversible gels in organic solvents. The basis of the gelation is the formation of linear aggregates by base pairing following desolvation of the nucleobases. This is evidenced by the absence of gel formation by the C(6)‐deaminated analogue 3 of 1 , the correlation of gelation with the anti‐conformation, as preferred for 1 , and the temperature‐, concentration‐, and time‐dependent CD spectra. The gels were also characterized by the minimum gelation concentration, the gel–sol transition (melting) temperature, and rheological properties.     

聚N,N-二乙基丙烯酰胺低聚物水溶液的分子动力学研究

对50个单元构成的聚N,N-二乙基丙烯酰胺(PDEA)低聚物的水溶液体系进行了分子动力学的研究,分别模拟了300 K时的伸展链、310 K时的伸展链以及紧缩链与水构成的体系,对溶液中PDEA周围溶剂水分子的分布情况以及水分子形成氢键的情况进行了统计,结果表明在PDEA周围的水产生了比本体水更有序的结构,形成了更多的氢键,这种有序结构维持到第二水合层甚至更远.发生相分离后,PDEA与水分子形成的氢键大部分未被破坏,水合层中每个水分子形成的氢键数也没有明显变化,但水合层(形成有序结构的水分子)内水分子数目的减少使得总的氢键数目减少,从而造成体系能量增加及熵增加.同时还研究了聚合物及水分子的自扩散系数,表明PDEA影响周围水分子结构的同时,对水的动力学性质也产生了很大影响.     

固态氢分子基质隔离高分辨光谱实验装置及其应用

建立了用傅立叶变换红外光谱和中红外差频激光光谱方法研究氢基质隔离光谱的测量装置. 作为装置的测试, 观测了3 cm长的固态氢分子晶体在1-5 μm波段的吸收光谱. 并用中红外差频激光测量其在2410 cm-1附近的W0(0)(v=0→0, J=6→0)谱线的高分辨精细结构. 通过在低温基片上喷溅沉积氢分子晶体薄膜的方法, 对氢基质隔离的CO2分子的高分辨红外吸收光谱进行了研究.     

锂掺杂ZnO陶瓷靶材制备及其掺杂引起的缺陷

采用燃烧合成和放电等离子烧结方法制备锂掺杂ZnO陶瓷靶材. 利用XRD, SEM, TEM和激光粒径分析等手段分析合成粉体与陶瓷的显微结构. 结果表明, 锂掺杂ZnO粉体与陶瓷均为纤锌矿结构, 无其他相存在; 粉体的粒径分布为0.18-1.7 μm, 烧结体致密度较高, 晶粒尺寸为1-3 μm. 此外, 分析锂元素在烧结过程中引起掺杂缺陷变化, 锂元素由ZnO晶格的间隙位置转移为替代锌晶格位置, 实现受主掺杂, 为实现p型ZnO薄膜的制备奠定基础.     

Breaking Surface Atomic Monogeneity of Rh2P Nanocatalysts by Defect-Derived Phosphorus Vacancies for Efficient Alkaline Hydrogen Oxidation

Breaking atomic monogeneity of catalyst surfaces is promising for constructing synergistic active centers to cope with complex multi-step catalytic reactions. Here, we report a defect-derived strategy for creating surface phosphorous vacancies (P-vacancies) on nanometric Rh₂P electrocatalysts toward drastically boosted electrocatalysis for alkaline hydrogen oxidation reaction (HOR). This strategy disrupts the monogeneity and atomic regularity of the thermodynamically stable P-terminated surfaces. Density functional theory calculations initially verify that the competitive adsorption behavior of H_ad and OH_ad on perfect P-terminated Rh₂P{200} facets (p-Rh₂P) can be bypassed on defective Rh₂P{200} surfaces (d-Rh₂P). The P-vacancies enable the exposure of sub-surface Rh atoms to act as exclusive H adsorption sites. Therein, the H_ad cooperates with the OH_ad on the peripheral P-sites to effectively accelerate the alkaline HOR. Defective Rh₂P nanowires (d-Rh₂P NWs) and perfect Rh₂P nanocubes (p-Rh₂P NCs) are then elaborately synthesized to experimentally represent the d-Rh₂P and p-Rh₂P catalytic surfaces. As expected, the P-vacancy-enriched d-Rh₂P NWs catalyst exhibits extremely high catalytic activity and outstanding CO tolerance for alkaline HOR electrocatalysis, attaining 5.7 and 14.3 times mass activity that of p-Rh₂P NCs and commercial Pt/C, respectively. This work sheds light on breaking the surface atomic monogeneity for the development of efficient heterogeneous catalysts.