骨料对混凝土材料冲击压缩行为的影响

利用大尺寸Hopkinson压杆，以实验数据为依据，研究了四种不同骨料尺寸的普通混凝土材料和两种不同配比的钢纤维增强混凝土材料在冲击载荷下的压缩强度，从唯象的角度分析了骨料性质及其粒径对混凝土材料动态压缩性能的影响及可能的力学机理，为在工程上更好地利用混凝土材料提供一定的理论和实验的支持。     

A new method for calculating hysteretic <Emphasis Type="Italic">K</Emphasis>(<Emphasis Type="Italic">S</Emphasis>) relationship

A new method for calculating the hysteretic relationship between hydraulic conductivity (K) and suction (S) is proposed. This method uses the experimental (K–S) data of the main wetting and drying branches and predicts satisfactorily the scanning drying and wetting curves. The proposed method is applicable to those porous media where the hysteretic Θ–S relationship complies with the independent domain concept.     

Disk-shaped compact tension test for asphalt concrete fracture

A disk-shaped compact tension (DC(T)) test has been developed as a practical method for obtaining the fracture energy of asphalt concrete. The main purpose of the development of this specimen geometry is the ability to test cylindrical cores obtained from in-place asphalt concrete pavements or gyratory-compacted specimens fabricated during the mixture design process. A suitable specimen geometry was developed using the ASTM E399 standard for compact tension testing of metals as a starting point. After finalizing the specimen geometry, a typical asphalt concrete surface mixture was tested at various temperatures and loading rates to evaluate the proposed DC(T) configuration. The variability of the fracture energy obtained from the DC(T) geometry was found to be comparable with the variability associated with other fracture tests for asphalt concrete. The ability of the test to detect changes in the fracture energy with the various testing conditions (temperature and loading rate) was the benchmark for determining the potential of using the DC(T) geometry. The test has the capability to capture the transition of asphalt concrete from a brittle material at low temperatures to a more ductile material at higher temperatures. Because testing was conducted on ungrooved specimens, special care was taken to quantify deviations of the crack path from the pure mode I crack path. An analysis of variance of test data revealed that the prototype DC(T) can detect statistical differences in fracture energy resulting for tests conducted across a useful range of test temperatures and loading rates. This specific analysis also indicated that fracture energy is not correlated to crack deviation angle. This paper also provides an overview of ongoing work integrating experimental results and observations with numerical analysis by means of a cohesive zone model tailored for asphalt concrete fracture behavior.     

大体积混凝土结构随机温度徐变应力计算方法研究

首次尝试将随机有限元法引入大体积混凝土结构随机温度徐变应力的计算．综合考虑各种随机因素，对于由材料物理参数随机性引起的随机温度场的影响，本文给出了相应于初应变隐式解法的随机有限元计算方法；对于周期平稳随机温度场对徐变应力场的影响，本文提出了复模量隐式解法，并首次视复频响应函数为材料参数的随机函数，给出了相应的复频响应－随机有限元列式；而对于一般非平稳绝热温升温度场的影响，本文提出了参数调幅逐段简化的方法．本文方法有效地克服了前人不能考虑材料参数随机性或需弹模不随时间变化的局限性     

钢纤混凝土裂纹尖端应变场的实验研究

本文应用散斑干涉技术在四组含纤量分别为０，０．５％，１％，１．５％的钢纤混凝土三点弯曲裂纹试件的裂纹尖端位移场进行了测试，并换算为应变场。对钢纤混凝土开裂的基理进行了探讨；验证了最大位应变准则；并测定断裂韧度Ｊｉｃ．     

桥梁空间分析中预应力效应分析方法研究

预应力技术在桥梁中的广泛使用,使得桥梁结构受力状况复杂,对预应力混凝土桥梁进行空间分析是必要的;但由于预应力筋数量庞大且形状复杂,对预应力空间效应的模拟是预应力混凝土桥梁空间分析的难点。从预应力筋的实际作用机理出发,提出在预应力张拉阶段用等效节点荷载来模拟预应力对结构的作用;而在预应力管道灌浆后,将预应力筋作为结构的一部分,用实体退化单元进行结构分析,并用两算例对本文的方法进行了验证。结果表明,该方法能真正模拟预应力的空间效应,可用于预应力混凝土桥的空间分析。     

负温钢纤维混凝土受压损伤过程的实验研究

利用岩石力学试验系统(RMT)对负温下钢纤维混凝土进行了单轴压缩实验,测得了-5℃、-10℃、-15℃、-20℃下钢纤维混凝土的应力-应变曲线、杨氏模量、极限应力、泊松比等。实验结果表明材料的强度、杨氏模量随温度的下降而上升,尤其是当温度由-10℃下降至-15℃时,这些物理量变化特别显著,之后它们将逐渐趋于某一稳定值。本文对钢纤维混凝土力学性能的温度效应进行了分析并对实验结果进行了细观上的讨论。最后针对负温钢纤维混凝土应力-应变曲线的特点,基于塑性力学和损伤力学理论,建立了负温钢纤维混凝土的含损伤本构方程。该方程物理概念清晰,形式简单,具有一定的应用参考价值。     

Prediction of the penetrated rust into the microcracks of concrete caused by reinforcement corrosion

Consider a steel-rust-concrete composite consisting of a circular cylindrical concrete cover and a coaxial uniformly corroding steel reinforcement. Prediction of the amount of rust penetrated into the microcracks of concrete cover from a set of data measured at the surface of the concrete is of particular interest. The steel is assumed to be linear isotropic and rust follows a power law stress–strain relation. For the concrete, anisotropic behavior and post-cracking softening model is employed. The formulations lead to a nonlinear boundary value problem which is solved analytically. A key parameter β, defined as the ratio of the volume of corrosion products inside the cracks to the volume of the cracks, is calculated. With some efforts, this parameter is also extracted from the available theoretical and experimental studies for the purpose of comparison. The effects of the mechanical properties of rust and concrete on β is addressed.     

Experimental study of air–water flow in downward sloping pipes

This paper presents results from seven experimental facilities on the co-current flow of air and water in downward sloping pipes. As a function of the air flow rate, pipe diameter and pipe slope, the required water discharge to prevent air accumulation was determined. In case the water discharge was less than the required water discharge, the air accumulation and additional gas pocket head loss were measured. Results show that volumetric air discharge as small as 0.1% of the water discharge accumulate in a downward sloping section. The experimental data cover all four flow regimes of water-driven air transport: stratified, blow-back, plug and dispersed bubble flow. The analysis of the experimental results shows that different dimensionless numbers characterise certain flow regimes. The pipe Froude number determines the transition from blow-back to plug flow. The gas pocket head loss in the blow-back flow regime follows a pipe Weber number scaling. A numerical model for the prediction of the air discharge as a function of the relevant system parameters is proposed. The novelty of this paper is the presentation of experimental data and a numerical model that cover all flow regimes on air transport by flowing water in downward inclined pipes.     

水泥聚苯模壳格构式混凝土墙体的抗侧性能试验及分析

论文介绍6片不同高宽比的水泥聚苯模壳格构式混凝土墙体在轴压力和水平往复侧推力作用下的试验,分析这种墙体的抗侧强度、刚度和延性等力学性能.试验表明,高宽比大于1的墙体破坏时表现为墙体跟部的单一水平裂缝,其他部位完好;高宽比3∶4的墙体破坏时存在多条通过格构梁柱的斜向裂缝,墙体裂缝分布密集,变形能力好.