Hybrid Materials Based on Conducting Polymers for Nitrite Sensing: A Mini Review

Well-known as a hazardous compound, nitrite constitute a real threat to the public health. So, there is a pressing need to detect and quantify them in different matrix. Even though conventional analytical methods can be used to address this issue, electrochemistry allows a fast, sensitive, and efficient analysis. Conducting polymers continue to raise great interest among scientific communities due to their properties. Moreover, their combination with carbon nanomaterials, or metallic nanoparticles improves their properties, and provides great results. In this paper, we will focus on some revealing works devoted to the electrochemical detection of nitrite using this kind of materials.     

Elastic Organic Crystals Based on Barbituric Derivative: Multi-faceted Bending and Flexible Optical Waveguide

Elastic organic single crystals with light-emitting and multi-faceted bending properties are extremely rare. They have potential application in optical materials and have attracted the extensive attention of researchers. In this paper, we reported a structurally simple barbituric derivative DBDT , which was easily crystallized and gained long needle-like crystals (centimeter-scale) in DCM/CH₃OH (v/v=2/8). Upon applying or removing the mechanical force, both the (100) and (040) faces of the needle-like crystal showed reversible bending behaviour, showing the nature of multi-faceted bending. The average hardness (H) and elastic modulus (E) were 0.28±0.01 GPa and 4.56±0.03 GPa for the (040) plane, respectively. Through the analysis of the single crystal data, it could be seen that the van der waals (C−H⋅⋅⋅π and C−H⋅⋅⋅C), H-bond (C−H⋅⋅⋅O) and π⋅⋅⋅π interactions between molecules were responsible for the generation of the crystal elasticity. Interestingly, elastic crystals exhibited optical waveguide characteristics in straight or bent state. The optical loss coefficients measured at 627 nm were 0.7 dBmm⁻¹ (straight state) and 0.9 dBmm⁻¹ (bent state), while the optical loss coefficient (α) were 1.5 dBmm⁻¹ (straight state) and 1.8 dBmm⁻¹ (bent state) at 567 nm. Notably, the elastic organic molecular crystal based on barbituric derivative could be used as the candidate for flexible optical devices.     

The effect of high power airborne ultrasound and microwaves on convective drying effectiveness and quality of green pepper

The effectiveness of hybrid drying based on convective drying with application of ultrasound and microwave enhancement is the main subject of the studies. The drying kinetics, energy consumption as well as the quality aspect of green pepper is analysed. It was shown that hybrid drying methods shorten significantly the drying time, reduce the energy consumption and affect positively the quality factors. Each of the analysed aspects depend on combination of the convective-ultrasound-microwave drying programs. Besides, based on the drying model elaborated earlier by one of the authors, the effects of ultrasound on convective drying assessed by such phenomena as “heating effect”, “vibration effect” and “synergistic effect” are presented.     

Higher-order Dirac solitons in binary waveguide arrays

We study optical analogues of higher-order Dirac solitons (HODSs) in binary waveguide arrays. Like higher-order solitons obtained from the well-known nonlinear Schrödinger equation governing the pulse propagation in an optical fiber, these HODSs have amplitude profiles which are numerically shown to be periodic over large propagation distances. At the same time, HODSs possess some unique features. Firstly, the period of a HODS depends on its order parameter. Secondly, the discrete nature in binary waveguide arrays imposes the upper limit on the order parameter of HODSs. Thirdly, the order parameter of HODSs can vary continuously in a certain range.     

Polylactones. 13. Transesterification of Poly(L-Lactide) with Poly(Glycoude), Poly(β-Propio-Lactone), and Poly[ε -Caprolactone)

Homogeneous blends of poly(L-lactide) (M _n = 30 000 to 40 000) and poly(β-propiolactone) or poly(ε-caprolactone) were prepared in solution. The solvent-free blends were subjected to transesterification catalyzed by means of methyl triflate, triflic acid, boron trifluoride, or tributyltin methoxide at 100 or 150°C. At 100°C, transesterification was barely detectable even after 96 h. When poly(β-propiolactone) was used as the reactant at 150°C, degradation was faster than transesterification regardless of the catalyst. The same negative result was obtained for heterogeneous blends of poly(L-lactide) and poly(glycolide). In the case of poly(ε-caprolactone), copolyesters with slightly blocky sequences were obtained with tributyltin methoxide as catalyst, whereas the acidic catalysts caused rapid degradation. The copolyesters were characterized by means of ¹H-NMR spectroscopy with regard to their molar composition, by means of ¹³C-NMR spectroscopy with regard to their sequences, and by means of differential scanning calorimetry with regard to crystallinity.     

Polymeric Nanocomposites—Polyhedral Oligomeric Silsesquioxanes (POSS) as Hybrid Nanofiller

Abstract

Polyhedral oligomeric silsesquioxane (POSS), a hybrid nanostructured macromer has been used in the last decade for preparation of polymeric nanocomposites. Its versatile chemistry, which lends it for almost infinite chemical modification, sets it apart from other nanostructured fillers like nanoclays, carbon nanotubes, and carbon nanofibers. Depending on its functionality, 3‐D network, bead or pendant type‐POSS based polymeric nanocomposites can be synthesized. These have the potential to be designed for products with specific nanostructures for specific end‐use applications. This article discusses the trends in current research involving use of POSS macromers for modification of mainly thermal and viscoelastic properties of various polymers.     

Recent developments in polymer–block–polypeptide and protein–polymer bioconjugate hybrid materials

In the last few years, polymer bioconjugates have been shown to be useful in many emerging areas of materials science. Consequently, the synthesis of polymer bioconjugates has suddenly become a central topic in polymer chemistry. The versatility and robust nature of modern synthetic methods such as controlled radical polymerisation (CLRP),¹ ring-opening polymerisation (ROP), and ‘click’ chemistry make them excellent tools for the preparation of tailor-made polymer bioconjugates. CLRP in combination with other techniques has been shown to be a mature technology for building tailor-made block copolymers and protein–polymer conjugates with a wide range of applications, especially in biomedical domains. This review describes the recent advances and progress in the rapidly expanding field of bioconjugation, outlining the work performed up to 2012.     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.