Characterization and Spatial Matching of Laser Diode Beams

It is shown that the type of lateral waveguide of a laser diode cannot be determined uniquely based on just the measured magnitude of astigmatism. For a unique determination, the K-factor of Petermann, which characterizes the wavefront curvature at the laser output facet, must be measured as well. In order to determine the type of lateral waveguide, a setup for measuring astigmatic distances in the range 0–200 m with an error of ±2 m and a K-factor with an error of 20% was developed. Operational features of the setup were analyzed, and a technique that allows one to minimize the effect of beam ellipticity on the measurement results was found. Using the technique, the optimization of spatial matching of a laser diode with a ring interferometer of the butterfly type was accomplished. For transformation of the astigmatic elliptical beam into the axially symmetric mode of the interferometer, we have used an optical system that consists of two cylindrical and one spherical lenses. The algorithm for designing the matching system was developed, and the 85% injection of radiation of a AlGaAs laser diode into the principal mode of a ring interferometer was experimentally demonstrated.     

钛扩散铌酸锂矩形波导中的双折射耦合对传播常数的影响

 从亥姆霍兹方程出发，得到了各向异性光波导在弱导近似下的耦合模理论。耦合系数包括偏振耦合项和双折射耦合项。并用马卡提里近似下的模式作为零级近似。用一级微扰法计算了折射率渐变分布的钛扩散铌酸锂矩形波导的传播常数。在给定参数的情况下，得到双折射项引起的传播常数的改变约为主微扰项的3%，因此双折射耦合对钛扩散铌酸锂矩形波导的性能影响不可忽略，这对设计和分析与它相关的光波导器件具有指导意义。     

8 mm回旋行波管和返波管的三折螺旋波纹波导色散分析

 三折螺旋波纹波导使TE11模和TE21模相互耦合,其色散曲线能够在宽频带内与电子回旋共振,因此需要对色散方程进行研究。提出了适合工程实用的行波模式和返波模式的色散方程,并对方程中的耦合系数进行了简化,误差在1%左右。利用CST软件的VBA语言对螺旋波纹波导进行建模和计算,根据模拟得到的传输特性曲线的特点,提出一种模拟方法,将模拟与理论计算得到的色散曲线作对比,误差在5%左右。     

Acoustooptic extension of the frequency tunability of CW CO2 lasers: New FIR lasers emissions from CH3OH and13CH3OH

We have increased the frequency tunability of our CW waveguide CO₂ lasers by means of an acoustooptic amplitude modulator, operating at the fixed frequency of 90 MHz. The up-shifted, or down-shifted, laser optical sideband can be generated independently by adjusting the orientation of the modulator. The efficiency is larger than 50%. The frequency tunability of the CO₂ laser around each laser line is thus increased by 180 MHz. To demonstrate the possibilities of this method, a source composed of the above modulator and of a CW, 300 MHz tunable waveguide CO₂ laser has been used for the search of new large offset FIR laser lines from optically pumped CH₃OH and¹³CH₃OH molecules. As a result 15 and 10 new large offset laser lines were discovered respectively. New assignments of some laser lines are also proposed. We have also measured the Stark effect, the offset, and the polarization of other already known lines. In particular a Stark effect frequency tuning of about 1 GHz is demonstrated for a laser line at 208.399 m.     

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

A twin optically-pumped far-infrared CH₃OH laser has been constructed for use in plasma diagnostics. The antisymmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 m. With the 118.8-m line, it is obtained from the frequency separation of the anti-symmetric doublet that CH₃OH absorption line center is 16±1 MHz higher than the pump 9.7-m P(36) CO₂ laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described.This work was carried out under the collaborating research program at the Institute of Plasma Physics, Nagoya University, Nagoya 464, Japan.     

一种用单模光纤制作亚微米周期光栅的方法

本文报道一种用单模光纤制作亚微米周期光栅的全息方法,并详细分析和讨论了影响光栅质量的各种因素。实践证明这一方法完全适于制作面积不小于10×10mm~2适于集成光学元件需要的高质量光栅。     

相匹配契伦可夫辐射式倍频

用波导产生倍频波时,如果倍频波进入辐射模区,仍然有相匹配问题。契伦可夫辐射式倍频不是自动地实现相匹配的。相匹配要求导波基波模式场,倍频传输场(自由波),倍频触发场,以及经多次反射透射后的辐射场的迭加形成的总辐射场处于同步的相匹配状态。根据这个相匹配的分析,提出波导契伦可夫相匹配的特有的方法,那就是对波导的模色散进行设计,并指出非对称波导的特有优点,是改变一个边界上的反射相变,即选择不同色散的线性材料作包层,由此可得到相匹配的高效契伦可夫倍频辐射。     

阻抗复合消声器声学性能有限元预测方法及分析

为计算和分析具有复杂结构的阻抗复合式消声器的宽频消声性能,建立了一种高效声学有限元方法,给出了不同边界条件下的边界积分处理细节,得到有限元全局系数矩阵表达式,设计出计算程序框架以实现这些算法,其求解规模和计算速度与商业软件相比有优势。为计算阻抗复合式消声器的传递损失,通过阻抗管测量和数据拟合得到了吸声材料声学特性的经验公式。计算和测量了两通穿孔阻抗复合式消声器的传递损失,二者良好的吻合验证了声学有限元方法和计算程序的正确性。研究表明,插管长度影响消声器在中高频段的消声特性,右侧隔板上穿孔会消除共振峰,中高频消声性能随着出口管穿孔率的增加而提升。     

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric down-conversion in the periodically-poled lithium niobate on insulator (LNOI) waveguide. We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum, such as narrowing, broadening, and splitting. We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth. Our study may promote the development of on-chip photon sources in the LNOI platform, as well as opens up a way to engineer photon frequency state.     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...