Inclusion of molybdenocene dichloride (Cp2MoCl2) in 2-hydroxypropyl- and trimethyl-β-cyclodextrin: Structural and biological properties

Organometallic-cyclodextrin inclusion compounds were obtained by the treatment of molybdenocene dichloride (Cp₂MoCl₂) with the modified cyclodextrins (CDs) heptakis-2,3,6-tri-O-methyl-β-CD (TRIMEB) and 2-hydroxypropyl-β-CD (HPβCD) in aqueous solution. The products were isolated by liophilisation and characterised in the solid-state by powder XRD, thermogravimetric analysis, Raman and FTIR spectroscopy, and ¹³C CP MAS NMR spectroscopy. The results are consistent with inclusion of Cp₂MoCl₂, rather than hydrolysis products such as [Cp₂Mo(H₂O)X]⁺ (X = Cl, OH) or [Cp₂Mo(H₂O)₂]²⁺. The pure non-included metallocene Cp₂MoCl₂ and its inclusion compounds with unmodified β-CD, TRIMEB and HPβCD were screened for their potential antiproliferative and cytotoxic activity, in both human cancer and healthy cell lines. Inclusion in CD was found to enhance the cytotoxic effect of Cp₂MoCl₂, with the TRIMEB adduct displaying the highest anti-tumour activity, along with the lowest toxicity towards non-neoplastic cells.     

Optical biosensor for pharmaceuticals, antibiotics, hormones, endocrine disrupting chemicals and pesticides in water: Assay optimization process for estrone as example

Certain contaminants at trace concentrations in surface waters can have dramatic effects on the hormonal system of organisms in the aquatic environment. Therefore, immunoanalytical methods at a very low limit of detection (LOD) and a low limit of quantification (LOQ) are becoming more and more important for environmental analysis and especially for monitoring drinking water quality. Environmental monitoring of antibiotics, hormones, endocrine disrupting chemicals, and pesticides in real water samples (e.g. surface, ground or drinking water) with difficult matrices places high demands on chemical analysis. Biosensors have suitable characteristics such as efficiency in allowing very fast, sensitive, and cost-effective detection. Here we describe an assay optimization process with a fully automated immunoassay for estrone which resulted in a LOD below 0.20 ng L⁻¹ and a LOQ below 1.40 ng L⁻¹. In contrast to common analytical methods such as GC-MS or HPLC-MS, the biosensor used requires no sample pre-treatment and pre-concentration. The very low validation parameters for estrone are the result of the continuous optimization of the immunoassay. The basis of our sensitive assay is the antibody with a high affinity constant towards estrone. During the optimization process, we reduced the amount of antibody per sample and improved the chip surface modification. Finally, this proceeding led to a calibration routine with an amount of antibody of only 3.0 ng per sample (sample volume: 1.0 mL). The reduction of the amount of antibody per sample results in better validation parameters (LOD, LOQ, and IC₅₀), but this reduction leads to the current device-related limitation of the River Analyser (RIANA).For some endocrine disrupting compounds, no effect levels (NOELs) in the lower nanogram per liter range are reported. This defines the challenge, which analytical methods have to compete with and our RIANA instrument with its improved sensitivity for the detection of a single hormone in the lower nanogram per liter range is a powerful tool in aquatic analytics in addition to the common analytical methods.     

Determination of doxorubicin in human plasma by excitation-emission matrix fluorescence and multi-way analysis

Direct determination of doxorubicin (DXR), a cytotoxic anthracycline antibiotic, in human plasma was accomplished based on excitation-emission matrix (EEM) fluorescence measurements and multi-way chemometric methods based on parallel factor analysis (PARAFAC) and N-PLS. Several different procedures, such as residual analysis, core consistency diagnostic (CONCORDIA) and split-half analysis were employed to determine the correct number of factors in PARAFAC. These procedures converged to a choice of two factors, attributed to DXR and to the sum of two fluorescence species present in the plasma. Sample PARAFAC loadings were employed to build a regression model against concentration, resulting in a RMSECV of 0.060 μg ml⁻¹. N-PLS using two factors produced a RMSECV of 0.045 μg ml⁻¹. Figures of merit (FOM), such as sensitivity (SEN), selectivity (SEL) and limit of detection (L_D) were determined for both PARAFAC and N-PLS.     

Development and Validation of a Liquid Chromatographic Method for Determination of Efavirenz in Human Plasma

A simple, rapid, and sensitive high-performance liquid chromatographic method for estimation of efavirenz in human plasma has been developed and validated. Chromatography was performed with C₁₈ analytical column and 50:50 acetonitrile–phosphate buffer (pH 3.5) as mobile phase. Compounds were monitored by UV detection at 247 nm. The retention time for efavirenz was 6.45 min and that for the internal standard, nelfinavir, was 2.042 min. Response was a linear over the concentration range of 0.1 μg–10 μg mL⁻¹ in human plasma. The method was simple, specific, precise and accurate and was useful for bioequivalence and pharmacokinetic studies of efavirenz.     

Binding of brucine to human serum albumin

The feature of brucine binding to human serum albumin (HSA) was investigated via fluorescence and UV/vis absorption spectroscopy. The results revealed that brucine caused the fluorescence quenching of HSA by the formation of brucine–HSA complex. The hydrophobic interaction plays a major role in stabilizing the complex; the binding site number n and apparent binding constant K_A, corresponding thermodynamic parameters the free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS) at different temperatures were calculated. The distance r between donor (HSA) and acceptor (brucine) was obtained according to fluorescence resonance energy transfer. The effect of brucine on the conformation of HSA was analyzed using synchronous fluorescence spectroscopy and UV/vis absorption spectroscopy.     

Highly sensitive determination of haloperidol in human serum by capillary gas chromatography using a surface ionization detector

A method has been developed for highly sensitive determination of haloperidol in human serum involving a simple extraction procedure followed by gas chromatographic separation. Target components were separated from the extracting solvents with a Van den Berg type solventless sample injector before introduction Into a DB-1 capillary separation column. A surface ionization detector (SID), which has highly selective sensitivity for Substituted amines, was employed for quantitation using bromperidol as an internal standard. Chloroform proved to be the best extracting solvent, yielding a quantitative detection limit of 5 ng/ml (S/N = 2). Comparison of the response to target compounds obtained by the SID, FTD (flame thermionic detector), and FID (flame ionization detector) showed the SID to be superior.     

固定HCG抗体膜的跨膜电位

高分子膜作为一项新兴技术,在很多领域得到日益广泛的应用.近十几年,随着生物工程和生物传感器的迅速发展,高分子生物功能膜的研究倍受重视.高分子生物功能膜是采用固定化技术,将具有分子识别功能的材料(如酶、抗原、抗体等)固定在高分子膜上而制得的.在固定化膜表面发生的生物化学反应,可以引起膜的荷电状态的变化,从而导致跨膜电位的变化。有关固定化膜的报导较多,但主要限于固定化的方法及其应用方面的研究,而有关高分     

Studies on Interactions of Antibiotics with Serum Albumin by Surface Plasmon Resonance Biosensor

Introduction Humanserumalbumin(HSA)isawell known transportproteinforavarietyofmoleculesandions[1].Thebindingofadrugtoserumalbuminhasimportant pharmacokineticconsequencesbecauseitinfluences distribution,excretionandpharmacologicaleffectsof thedruginthebody…     

增强化学发光体系酶联免疫分析法测定人绒毛膜促性腺激素

应用活化鲁米诺,用优化的增强化学发光酶联免疫分析体系测定人绒毛膜促性腺激素,检测限为0.2mIU/ml。线性范围0～200mIU/ml,与放射免分析测定结果比较,相关性良好。进而又发展了一种半定量的照相测定法,通过实际血清样品测定,效果良好。     

Cathodic stripping voltammetric detection and determination at a hanging mercury-drop electrode of dye contaminants in purified biomaterials: study of the human serum albumin and reactive dye 120 system

Procion red HE-3B (RR120) is an example of dye currently used in affinity purification. A method is described for determining trace amounts of RR120 dye contaminant in human serum albumin by cathodic stripping voltammetry. The method is based on a measure of a well-defined peak at −0.58 V, obtained when samples of HSA protein (0.01-2% w/v) containing dye concentrations are submitted to a heating time of 330 min at 80 °C in NaOH, pH 12.0 and the samples are removed to a solution containing Britton-Robinson buffer, pH 4.0. Using an optimum accumulation potential and time of 0 V and 240 s, respectively, linear calibration curves were obtained from 1.0×10⁻⁹ to 1.0×10⁻⁸ mol l⁻¹ for RR120 dye. Leakage/hydrolysis of reactive red 120 from an agarose support (e.g. at pH 2 or 12) can also be conveniently determined at very low levels (sub-μg ml⁻¹) by means of cathodic stripping voltammetry, which involves adsorptive accumulation of the dye onto the hanging mercury-drop electrode.