A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

分散溶剂对PEMFC催化层中超薄Nafion离聚物质子传导的影响

质子交换膜燃料电池(PEMFC)商业化应用的瓶颈仍然是贵金属催化剂导致的成本问题。然而,目前对于催化层中纳米尺度全氟磺酸离聚物(以Nafion为代表)薄膜中质子传导的问题研究不足,无法完善三相界面的成型规律,进而指导催化层设计。在催化层浆料制备过程中,分散溶剂对Nafion的分散形态有直接影响,可能对催化层成型后附着在催化剂颗粒表面Nafion薄膜的微观结构有潜在影响,进而影响Nafion薄膜的质子传导能力。因此,在本文中利用分子自组装技术模拟催化层离聚物薄膜的聚集过程,于模型基底上制备厚度精确可控的纳米尺度Nafion薄膜,并通过微观测试表征技术探索并建立纳米尺度Nafion离聚物的微观结构模型,阐明分散溶剂对Nafion薄膜微观结构及质子传导的影响。研究发现Nafion薄膜在纳米尺度下的质子电导率比体相膜的质子电导率低一个数量级,使用介电常数较小的醇类溶剂可以使Nafion薄膜形成更有利于质子传导的微观结构,使Nafion薄膜的质子电导率得到提高。相关研究结果为优化PEMFC催化层结构,改善PEMFC催化层中质子传导问题提供给了依据。     

基于(火积)理论的“+”形高导热构形通道实验研究

基于构形理论和■理论,对"+"形高导热通道的方形构造体开展导热实验研究,并对不同优化目标和不同高导热通道布置形式下的构造体导热性能进行比较.结果表明:对于"+"形高导热通道的方形构造体,实验和数值计算所得到的构造体最高温度点均位于"+"形高导热通道两分支之间,实验和数值计算所得到的构造体平均温差和■耗散率的误差均在可接受范围内,这从定性和定量的角度证明了导热构形优化结果的正确性.与"H"形高导热通道的方形构造体相比,构造体内高导热通道采用一级"+"形布置使得其导热■耗散率得到降低.■耗散率最小的一级"+"形高导热通道构造体最优构形与最大温差最小的构造体最优构形相比,前者的导热■耗散率降低了5.98%,但最大温差提高了3.57%.最大温差最小目标有助于提高构造体的热安全性,■耗散率最小目标有助于提高构造体的整体导热性能.在保证热安全性能的前提下,实际微电子器件设计中可采用■耗散率最小的构造体最优构形以提高其整体导热性能.     

Surface charge dynamics studied by the temporal evolution of the corona charging current

The decay of surface charges deposited on the dielectric material by the partial discharge (PD) activity has a great impact on the repetition of partial discharges. In this work, the effect of dielectric placed on the surface of ground electrode in a needle-plane configuration on the discharge activity was investigated, with the application of a periodic negative step voltage. The charge decay mechanisms on a corona charged dielectric surface were investigated based on a comparison between experiments and a FEM-based numerical model. The comparison indicates that the surface charges may decay due to different mechanisms depending on the applied stress.     

异质结碳纳米管的热整流效率

采用非平衡分子动力学方法, 通过分别控制异质结碳纳米管管径、手性和平均温度的方式研究了异质结碳纳米管的热整流效应. 研究表明, 随着异质结碳纳米管两端几何不对称性的增强, 其热整流效率会随之上升, 而异质结碳纳米管两端的手性的改变和夹角的大小都会对热整流效率产生一定的影响. 热整流效率会随着碳纳米管平均温度的上升而下降. 研究异质结碳纳米管热整流效率对于热二极管、碳纳米散热元器件等潜在应用价值有理论指导作用.     

Combined Intrinsic and Extrinsic Proton Conduction in Robust Covalent Organic Frameworks for Hydrogen Fuel Cell Applications

Developing new materials for the fabrication of proton exchange membranes (PEMs) for fuel cells is of great significance. Herein, a series of highly crystalline, porous, and stable new covalent organic frameworks (COFs) have been developed by a stepwise synthesis strategy. The synthesized COFs exhibit high hydrophilicity and excellent stability in strong acid or base (e.g., 12 m NaOH or HCl) and boiling water. These features make them ideal platforms for proton conduction applications. Upon loading with H₃PO₄, the COFs (H₃PO₄@COFs) realize an ultrahigh proton conductivity of 1.13×10^?1 S cm^?1, the highest among all COF materials, and maintain high proton conductivity across a wide relative humidity (40–100 %) and temperature range (20–80 °C). Furthermore, membrane electrode assemblies were fabricated using H₃PO₄@COFs as the solid electrolyte membrane for proton exchange resulting in a maximum power density of 81 mW cm^?2 and a maximum current density of 456 mA cm^?2, which exceeds all previously reported COF materials.     

Ionic conduction in composite polymer electrolytes at subambient temperatures

The majority of investigations carried out on polymer(SINGLEBOND) salt systems have been on polyether electrolytes at moderate temperatures where such electrolytes exhibit macroscopic uniformity. Relatively little attention has been paid to the subambient temperature region where composite electrolytes based on polyethers exhibit much higher conductivities than their pure polyether electrolyte analogues. For all of the composite systems studied the conduction mechanism changes from one in which the ions are coupled to the polymer segmental relaxations to one in which the ions are decoupled and thermally activated ionic hopping produces higher conductivities than would be expected from ion-segmental coupling and higher than observed for the base polyether(SINGLEBOND) salt system. This change has been observed at temperatures between 10 and 80°C above the respective glass transition temperatures. The relationship between this interaction and these higher conductivities at subambient temperatures is explored and discussed. © 1996 John Wiley & Sons, Inc.     

金属冲击温度的辐射法测量问题

 金属的冲击温度及熔化温度测量对构建其完全状态方程具有重要意义。简要综述了用于金属冲击温度及熔化温度辐射法测量的一维热传导理想界面模型和非理想界面模型,并着重对模型中明示或隐含的关键假定的合理性、影响金属冲击温度与熔化温度结果的主要因素进行了分析、讨论,以期对实验数据有一个合理的评估。还讨论了求解理想和非理想界面模型一维热传导方程界面温度时所隐含的冲击压缩下热导率不随温度而变、冲击压缩下金属样品/窗口界面辐射的灰体假定,以及窗口材料的透明性、非理想界面模型中表观界面温度的修正、动载条件下金属高压熔化温度的测量、界面的非Flourier热传导等问题。分析结果表明,目前采用辐射法测量大致可以得到冲击温度,在发生熔化的情况下可获得熔化温度,但离精密测量的要求还有较大差距。     

广义神经传播方程的整体吸引子

使用Galerkin方法,结合Sobolev空间理论和不等式技巧,给出了广义神经传播方程解的存在唯一性定理,然后利用吸引子存在性定理,采用半群方法证明了方程整体吸引子的存在性.