化学概念教学中学生归纳与演绎思维的培养*——基于对“电解质”概念教学的分析

归纳与演绎思维在化学概念的形成、巩固和应用过程中发挥着重要作用,化学概念教学中归纳与演绎思维的培养要遵循生为主体师为主导、概念教学与思维培养相统一、思维培养和概念教学循序渐进、归纳演绎与分析综合相结合的原则。以“电解质”概念的教学为例,分别从化学概念教学中归纳思维的培养和演绎思维的培养等2个维度对具体培养路径进行了阐释。     

生物质焦油热裂解动力学参数实验研究

基于进样过程中焦油蒸发的不稳定性以及反应温度的测定和控制难度,设计了移动床焦油进样系统,使用样品槽携带焦油进入具有线性温度分布的炉膛空间,以样品槽的运动进样代替焦油流动进样,以获得稳定的焦油蒸发进样和更容易控制的反应温度。在此基础上,研究了不同进样速率下的焦油热裂解及其动力学特性。结果表明,在573~1 123 K,焦油的裂解率随温度的升高而加速升高,并在1 123 K时达到58%的裂解率;焦油热裂解遵循一级动力学反应,其平均活化能为39.5 kJ/mol,指前因子为1.58 min^-1。     

离子热法合成分子筛的研究进展

离子热法是以离子液体或低共熔混合物为介质的一种新型的分子筛合成方法, 它提供了一种离子态的独特合成环境, 为合成新型分子筛及研究分子筛的生成机理提供了机会. 本文综述了离子热法在分子筛合成方面取得的一些进展, 包括合成方法的创新、合成机理的研究、新材料的合成以及新型催化剂的制备等, 并展望了其发展前景.     

Determination of total phosphorus and nitrogen in turbid waters by oxidation with alkaline potassium peroxodisulfate and low pressure microwave digestion, autoclave heating or the use of closed vessels in a hot water bath: comparison with Kjeldahl digestion

The evaluation of the use of alkaline peroxodisulfate digestion with low pressure microwave, autoclave or hot water bath heating for the determination of total phosphorus and nitrogen in turbid lake and river waters is described. The efficiency of these digestion procedures were compared to a Kjeldahl digestion procedure with sulphuric acid-potassium sulfate and copper sulfate. The final solution before digestion was 0.045 M in potassium peroxodisulfate and 0.04 M in sodium hydroxide. Procedures were evaluated by the analysis of suspensions of two reference materials, National Institute of Environmental Science, Japan, no. 3 Chlorella and no. 2 pond sediment and natural turbid waters. Best recoveries of phosphorus and nitrogen by microwave heating were obtained when solutions were digested at 95 °C for 40 min. Quantitative recoveries of phosphorus from Chlorella suspensions up to 1000 mg/l were obtained by all three heating procedures, but incomplete recoveries of nitrogen occurred above 20 mg N/l in the digested sample. Good recoveries of phosphorus and nitrogen from suspended sediment suspensions were obtained only from solutions containing <150 mg/l of suspended sediments. Recoveries of phosphorus from phosphorus compounds containing COP and CP bonds added to distilled water were quantitative (94-113%) except for polyphosphates (microwave, 34±8; autoclave, 114±6; water bath, 96±4) and aluminium phosphate (8-23%). Recoveries of nitrogen compounds containing CN bonds added to distilled water were quantitative (94-96%). The analysis of a range of natural turbid water samples by alkaline peroxodisulfate and microwave, autoclave and water bath heating gave similar total phosphorus and nitrogen results. All procedures using alkaline peroxodisulfate underestimate phosphorus concentrations at high suspended sediment concentrations (>150 mg/l) and are only suitable for the analysis of very turbid samples when the turbidity is due to organic matter (algal cells, plant detritus). Underestimation of nitrogen occurs when samples contain more than 20 mg N/l.     

微波消解ICP-AES法测定玩具塑料中镉

采用微波加压消解溶样，ICP-AES法测定玩具塑料中镉含量，选择最佳工作条件，方法简便、快速、可靠。适用于各类玩具塑料中镉含量的分析。     

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

计算烷烃异构体生成焓的新方法

基于作者提出的诱导极性叠加原理,设计了包括与诱导极性叠加总量要关的能量项的烷烃异构体的标准生成焓估算的新方法。与前人方法比较,它具有较高的计算精度,较少的参数,各参数物理意义明确,而且理论上可以推广到含多种杂原子的衍生物的标准生成焓的计算。     

微波场对SrTiO3化学合成中热过程的影响

在分析微波场中SrTiO3化学合成体系与电磁场相互作用的基础上,探讨合成体系在微波场中的加热机制和影响升温的主要因素（如合成体系的介电性质、保温材料的结构、生还的致密度等）,结果表明,TiO2和SrCO3在低温阶段对体系的升温速率的贡献相接近;高温阶段体系升温主要是TiO2的贡献,同时产物对升温有较大的影响。微波合成与常规合成再加热方式上的明显不同,对合成过程、合成时间等影响较大。     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

微波加热合成多孔花状结构的纳米α-Bi_2O_3

<正>金属氧化物如氧化钛、氧化锌、氧化铜、氧化铁和氧化铋等是一类重要的半导体材料,它们在磁存储介质、太阳能转换、电子器件和催化等领域里有着广泛的应用,因此其纳米粉体的制备及性能研究吸引了众多的科学工作者。