Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.     

C2H4-K体系中振动态至电子态传能的研究

用TEA CO_2激光将C_2H_4分子激发到高振动激发态，高振动激发态的C_2H_4分子与基态的K原子碰撞发生振动态→电子态（V→E）传能过程，根据提出的能级组模型，对测得的时间分辨原子荧光信号进行处理，获得温度在453－663 K范围内，C_2H_4-K体系中V→E传能速率的数量级为10~(-10)/cm~3·molecule~(－1)·s~(－1)，对应的碰撞传能截面约为0.30～0.80 nm．随着反应温度升高，V→E传能截面减小．上述实验结果表明碰撞体间吸引相互作用在这种非共振的V→E传能过程中起主要作用．利用多极相互作用势下的碰撞络合物模型对实验结果进行了讨论．     

Fluorescence-based nucleic acid detection and microarrays

Recent analytical innovations for nucleic acid detection have revolutionized the biological sciences. Single nucleic acid sequence detection methods have been expanded to incorporate multiplexed detection strategies. A variety of nucleic acid detection formats are now available that can address high throughput genomic interrogation. Many of these parallel detection platforms or arrays, employ fluorescence as the signaling method. Fluorescence-based assays offer many advantages, including increased sensitivity, safety and multiplexing capabilities, as well as the ability to measure multiple fluorescence properties. Multiplexed microarray platforms provide parallel detection capabilities capable of measuring thousands of simultaneous responses. This review will discuss both single target detection and microarray applications with a focus on gene expression and pathogenic microorganism (PM) detection.     

源内裂解液相色谱-质谱鉴别人参皂甙砒和拟人参皂甙F11

研究了利用源内碰撞诱导解离（in-source collision—induced dissociation）的高效液相色谱-大气压化学电离质谱（HPLC—APCI／MS）获取人参和西洋参的化学标志物——人参皂甙Rf和拟人参皂甙F11的特征结构信息及鉴别人参和西洋参的方法。在乙腈-水梯度洗脱反相液相色谱及源内碰撞诱导解离条件下，能获得人参皂甙Rf和拟人参皂甙F11的母核离子及去糖基离子的源内碰撞诱导解离谱，从其差别能清楚区分这对同分异构体。本方法对人参皂甙Rf和拟人参皂甙F11的检出限能达到10^-7g柱上样量，简单、快速，单次质谱实验就能鉴别人参和西洋参。     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

A new approach to the design of surface treatments for reinforcing agents

A new approach for design of improved interfacial bonding between carbon fibers and polymeric matrices is described. In this method the affinity of surface-treated carbon fibers to various polymer matrices is simulated by analyzing the adsorption characteristics of model compounds, typical of the polymer units, onto very high surface area carbon fibers. The affinity can be evaluated by the use of Thermogravimetric Analysis (TGA) to measure adsorption–desorption characteristics. Since high surface area, activated carbon fibers (ACF) can be chemically treated to obtain acidic, basic, nonpolar or highly polar surfaces, it should be possible to assess the interactions of chemically modified surfaces with model compounds such as methanol (MeOH), acetone, dimethylformamide (DMF), dimethylether, tetrahydrofuran (THF) and water. Some preliminary results are presented, indicating that surface treatments for carbon fibers other than oxidation may lead to enhanced bonding with polymeric matrices.     

High-pressure phase transition in LiBH4

The high-pressure phase transition from ambient pressure α-LiBH₄ to high-pressure β-LiBH₄ was observed by Raman spectroscopy and X-ray diffraction between 0.8 and 1.1 GPa. The phase boundary between these two phases was mapped over a large range of temperatures using thermal conductivity studies and differential thermal analysis. The structure of the high-pressure phase could not be identified due to small number of experimentally observed reflections, but it was shown that it is different from previously reported theoretical predictions.     

Structural evolution of (Ca0.35Sr0.65)TiO3 perovskite at high pressures

Lattice parameters of a synthetic powder sample of Ca_0.35Sr_0.65TiO₃ perovskite have been determined by the method of Le Bail refinement, using synchrotron X-ray diffraction patterns collected at pressures up to 15.5 GPa with a membrane-driven diamond anvil cell. At ambient conditions, diffraction data were consistent with the I4/mcm structure reported previously in the literature for the same composition. Diffraction data collected at high pressures were consistent with tetragonal (or, at least, pseudo-tetragonal) lattice geometry, and no evidence was found for the development of any of the orthorhombic structures identified in other studies of (Ca, Sr)TiO₃ perovskites. Additional weak reflections, which could not be accounted for by the normal I4/mcm perovskite structure, were detected in diffraction patterns collected at pressures of 0.9-2.5 GPa, and above ∼13.5 GPa, however. Small anomalies in the evolution of unit cell volume and tetragonal strain were observed near 3 GPa, coinciding approximately with breaks in slope with increasing pressure of bulk and shear moduli for a sample with the same composition which had previously been reported. The anomalies could be due either to new tetragonal↔tetragonal/pseudo-tetragonal phase transitions or to subtle changes in compression mechanism of the tetragonal perovskite structure.