A classification of orbits admitting a unique invariant measure

We consider the space of countable structures with fixed underlying set in a given countable language. We show that the number of ergodic probability measures on this space that are $S_{\infty }$-invariant and concentrated on a single isomorphism class must be zero, or one, or continuum. Further, such an isomorphism class admits a unique $S_{\infty }$-invariant probability measure precisely when the structure is highly homogeneous; by a result of Peter J. Cameron, these are the structures that are interdefinable with one of the five reducts of the rational linear order $(\mathbb{Q},<)$.     

水煤浆喷嘴热冲蚀磨损机理研究

采用1Crl8Ni9Ti不锈钢、YG8硬质合金和Al2O3／(W，Ti)C陶瓷3种材料制备了水煤浆喷嘴，考察了其在水煤浆雾化和燃烧过程中的热冲蚀磨损机理．结果表明：喷嘴材料的硬度对水煤浆喷嘴的热冲蚀磨损行为具有重要影响；在相同条件下，高硬度的Al2O3／(W，Ti)C陶瓷喷嘴的冲蚀率最低，YG8硬质合金次之，硬度较低的1Crl8Ni9Ti不锈钢喷嘴的冲蚀率最高；在热冲蚀磨损工况下，1Crl8Ni9Ti不锈钢水煤浆喷嘴主要呈现微切削特征，YG8硬质合金水煤浆喷嘴主要呈现晶粒剥落特征，而Al2O3／(W，Ti)C陶瓷水煤浆喷嘴主要呈现研磨损伤和热崩特征．     

非半单分叉的Normal Form计算

在文［１］基础上，提出一种仅知道派生线性系统零实部特征值时求解非线性系统非半单分叉ＮｏｒｍａｌＦｏｒｍ的方法．通过适当的分类，将要求解的线性代数方程组分为若干相互独立的方程组．将所求系数向量按字典序列排列后，各独立方程组的系数矩阵是上三角矩阵．在非共振情形，各系数向量可按反字典序列递推求出．在共振情形，根据文中的二个定理，巧妙地由一简单的常数矩阵的最大秩子矩阵，定位其系数矩阵的满秩子矩阵，解决了这类方程组的降维简化．通过消元法，把简化后的方程化成类似于半单分叉ＮｏｒｍａｌＦｏｒｍ求解过程中方程的形式，其解法也类似．该方法非常易于在计算机代数软件平台上程序化．     

富溪双连拱隧道出口高边坡稳定性评价及支护效果分析

富溪双连拱隧道出口高边坡岩体风化、卸荷严重,在施工开挖前边坡中上部已经发生较为明显的倾倒变形,整个变形体处于极限平衡状态。本文在现场调查和岩体结构分析基础上,建立了边坡变形破坏机理的概念模型,利用FLAC3D模拟研究了开挖后坡体变形特征。在变形分析基础上,提出了对倾倒变形体采用锚管注浆处理的边坡治理措施,支护效果模拟计算表明,注浆后边坡稳定性较好,同时监测资料也显示支护措施实施后,边坡的稳定性较好,可以保障公路的施工和长期营运的安全。     

深部土高压卸载变形结构性量化参数确定及本构模型

用取自山东巨野矿区埋深300～600m的深部粘土样,在三轴伺服仪上进行原状和重塑土的高压三轴卸载试验,对比分析其变形特点;提出一种描述深部土高压卸载变形与强度连续变化的土结构性参数的方法,并根据三轴卸载试验结果,确定了巨野矿区深部土高压卸载变形结构性参数,建立了描述巨野矿区深部土高压卸载结构性本构模型。     

球形封闭容器内一个简单的煤粉燃烧爆炸模型

在分析了大量球形封闭容器内煤粉燃烧爆炸实验数据基础上，考虑了煤粉燃烧爆炸机理所涉及的湍流燃烧、相变、各种化学反应动力学过程等复杂因素，并且对球形封闭容器内由于煤粉混合不均匀造成的燃烧不充分给予了考虑，得到了球形封闭容器内煤粉燃烧爆炸特征的数值计算结果，计算的压力－时间曲线与实验结果符合较好。     

Dynamic shearing resistance of molten metal films under high pressures and extremely high shearing rates

In the present study plate-impact pressureshear experiments have been conducted to study the dynamic shearing resistance of molten metal films at shearing rates of approximately 10⁷ s⁻¹. These molten films are generated by pressure-shear impact of relatively low melt-point metals such as 7075-T6 Al alloy with high hardness and high flow-strength tool-steel plates. By employing high impact speeds and relatively smooth impacting surfaces, normal interfacial pressures ranging from 1–3 GPa and slip speeds of over 100 m/s are generated during the pressure-shear loading. The resulting friction stress (∼100 to 400 MPa) combined with the high slip speeds generate conditions conductive to interfacial temperatures approaching the fully melt temperature regime of the lower melt-point metal (7075-T6 aluminum alloy) comprising the tribo-pair. During pressure-shear loading, laser interferometry is employed to measure normal and transverse motion at the rear surface of the target plate. The normal component of the particle velocity provides the interfacial normal traction while the transverse component provides the shearing resistance of the interface as it passes through melt. In order to extract the critical interfacial parameters, such as the interfacial slip-speed and interfacial temperatures, a Lagrangian finiteelement code is developed. The computational procedure accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below melt the flyer and target materials are described as an isotropic thermally softening elastic-viscoplastic solid. For material elements with temperatures in excess of the melt point, a purely Newtonian fluid constitutive model is employed. The results of this hybrid experimental-computational study provide insights into the dynamic shearing resistance of molten metal films at high pressures and extremely high shearing rates.     

Experimental investigation of a buckled beam under high-frequency excitation

In this paper, we investigate theoretically and experimentally dynamics of a buckled beam under high-frequency excitation. It is theoretically predicted from linear analysis that the high-frequency excitation shifts the pitchfork bifurcation point and increases the buckling force. The shifting amount increases as the excitation amplitude or frequency increases. Namely, under the compressive force exceeding the buckling one, high-frequency excitation can stabilize the beam to the straight position. Some experiments are performed to investigate effects of the high-frequency excitation on the buckled beam. The dependency of the buckling force on the amounts of excitation amplitude and frequency is compared with theoretical results. The transient state is observed in which the beam is recovered from the buckled position to the straight position due to the excitation. Furthermore, the bifurcation diagrams are measured in the cases with and without high-frequency excitation. It is experimentally clarified that the high-frequency excitation changes the nonlinear property of the bifurcation from supercritical pitchfork bifurcation to subcritical pitchfork bifurcation and then the stable steady state of the beam exhibits hysteresis as the compressive force is reversed. This work was partially supported by the Japanese Ministry of Education, Culture, Sports, Science, and Technology, under Grants-in-Aid for Scientific Research 16560377.     

EAST �����ɶ��ڿ���е�۵����˶�ѧ�㷨�о�

为了实现 EAST 装置真空室内的内窥多关节机械臂的实时高精度控制,提出了一种逆运动学算法,即建立机械臂多变量的方程组,转化成为矩阵的特征值问题求解。为了验证和满足实际控制的需要,还基于 VC++6.0 开发了 MFC 运动学算法程序。结果表明,该算法能在 ms 级别内得到机械臂的所有运动学逆解。     

A New Scheme for High‐Intensity Laser‐Driven Electron Acceleration in a Plasma

We propose a new approach to high‐intensity relativistic laser‐driven electron acceleration in a plasma. Here, we demonstrate that a plasma wave generated by a stimulated forward‐scattering of an incident laser pulse can be in the longest acceleration phase with injected relativistic beam electrons. This is why the plasma wave has the maximum amplification coefficient which is determined by the acceleration time and the breakdown (overturn) electric field in which the acceleration of the injected beam electrons occurs. We must note that for the longest acceleration phase the relativity of the injected beam electrons plays a crucial role in our scheme. We estimate qualitatively the acceleration parameters of relativistic electrons in the field of a plasma wave generated at the stimulated forward‐scattering of a high‐intensity laser pulse in a plasma. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)