高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

Quantitative determination of UV filters in sunscreen lotions using microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) has been applied to the separation of some UV filters (Eusolex 4360, Eusolex 6300, Eusolex OCR, Eusolex 2292, Eusolex 6007, Eusolex 9020, Eusolex HMS, Eusolex OS, and Eusolex 232) commonly used in sunscreen lotions. Use of a MEEKC buffer with a mixed surfactant system to stabilize the oil droplets and an organic modifier in the aqueous phase allowed separation of most of the selected analytes in a single run in a system fitted with a diode array detector recording three wavelengths (240 nm, 300 nm, and 380 nm) simultaneously. The microemulsion employed consisted of 2.25 g of SDS, 0.75 g of Brij 35, 6.6 g 1‐butanol, 0.8 g n‐octane, 17.5 g 2‐propanol, and 72.1 g of 10 mM borate buffer (pH 9.2). Detection limits from 0.65 to 6.0 μg/mL were obtained and the calibration plots were linear over at least one order of magnitude for all analytes. The developed method could be applied to the determination of UV filters in several sun protection products including lotions, milks, and oils. Comparison of the obtained data with those from an HPLC method described in the literature showed acceptable agreement.     

Cellulase Activity in Different Buffering Media During Waste Paper Hydrolysis by HPLC

The activity of cellulase has traditionally been described by pH and temperature; however, the buffering medium is also an important factor, Taking plain water as a reference medium, three kinds of buffer including KH₂PO₄/K₅HPO₄, citric acid/sodium citrate, and acetic acid/sodium acetate were adopted to survey their effects on the activity of cellulase. Chromatographic assays indicated that xylose, glucose, and cellobiose were the major products and that minor products such as cellotriose and cellotetraose were present in some cases. The activities of cellulase based on glucose production showed that the phosphate buffer acted as a deactivator for cellulase and each of the two organic acid buffers acted as activators for cellulase. The concentration of activation buffer should be high to reach a high cellulase activity; however, this effect would be compensated for by the product inhibition of cellulase. The highest activity obtained was 4.16 ± 0.08 (× 10^?3) IU mg^?1 for the citric acid/sodium citrate buffer under pH 4.80, 40 °C and an agitation speed of 150 rpm.     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

手性高效液相色谱法测定1—（6‘—甲氧基萘）乙醇不对称氢酯基化反应

在自制的硅基纤维素－三（３，５－二甲基苯基氨基甲酸酯）高效液相色谱手性固定相上（ＨＰＬＣ－ＣＳＰ），优化了１－（６＇－甲氧基萘）乙醇氢酯基化反应产物－萘普生甲酯手性分离的条件，测定了相应的一系列不对称氢酯基化反应产物的对映体过剩值（ｅ．ｅ．值）。结果表明，在ＣＤＭＰＣ－ＣＳＰ手性柱上用ＨＰＬＣ测定此类不对称催化反应的光学产率，评价催化剂体系的手性选择是一种非常理想的方法。     

Effects of polystyrene-encapsulated magnesium hydroxide on rheological and flame-retarding properties of HIPS composites

In this study, polystyrene (PS)-encapsulated magnesium hydroxide (Mg(OH)₂) was successfully prepared by in situ polymerization of styrene on the surface of Mg(OH)₂ in a high-speed mixer. A large amount of PS chemically bonded on Mg(OH)₂ surface was confirmed by means of FT-IR, TGA and SEM. A series of composites of high impact polystyrene (HIPS) were prepared by melt blending in a co-rotating twin-screw extruder. The effects of PS-encapsulated filler on the properties of HIPS composites were studied by SEM, rheology and combustion tests (horizontal burning tests and cone calorimetry). The dispersion and adhesion patterns of PS-encapsulated Mg(OH)₂ in HIPS matrix were investigated through FT-IR and SEM. The experimental results demonstrated that comparing to the composites containing untreated filler, the rheological and flame retardant properties of those containing PS-encapsulated filler were found to be significantly improved. This improvement is mostly attributed to a better dispersion of the encapsulated filler and a strong adhesion between the filler and matrix.     

Effects of type and number of impellers and liquid viscosity on the power characteristics of mechanically agitated gas—liquid systems

Effect of the type and number of high-speed impellers installed on a common shaft on the power characteristics was investigated in water and glucose solutions of different concentration. Different configurations of the Rushton or Smith turbines, pitched blade turbines, propeller, and A 315 impeller were tested. Measurements of power consumption were carried out within the transitional and turbulent regime of the fluid flow using the strain gauge method. Baffled agitated vessels with inner diameter of 0.288 m and 0.634 m were used for the experiments. Liquid height in the vessels was equal to the vessel diameter or it was twice higher. The relative power consumption was compared for different configurations of the impellers. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Quantitative High Resolution Electron Microscopy

 With the resolution becoming sufficient to reveal individual atoms, HREM is now entering the stage where it can compete with X-ray methods to quantitatively determine atomic structures of materials without much prior knowledge, but with the advantage of being applicable to aperiodic objects such as crystal defects. In our view the future electron microscope will be characterised by a large versatility in experimental settings under computer control such as the illumination conditions (TEM-STEM), CBED, detecting conditions (diffraction, image, ptychography) and many other tunable parameters such as focus (g), voltage, spherical aberration (C _s ), beam tilt, etc. Since modern detectors can detect single electrons, also the counting statistics is known. The only limiting factor in the experiment will be the total number of electrons that interact with the object during the experiment due to the limitations in the exposure time or in the object damage. However, instrumental potentialities will never be exploited fully if not guided by an experimental strategy. Here intuitive guidelines can be very deceptive. For instance an image made with the best electron microscope (C _s  = 0) at the best focus (g = 0) from the best object (phase object) would show no contrast at all. Hence, questions such as what is the best C _s , focus, object thickness, etc. can only be answered properly if done using a method of experiment design.     

The analysis of C4–C11 hydrocarbons in naphtha and reformate with a new apolar fused silica column

This paper deals with the separation of alkanes, naphthenes, and aromatic compounds in naphtha and reformate, on a newly developed apolar high resolution GC column. The selectivity of this apolar phase has been compared with those of squalane, DB-1, and SE-30. A total of 95 hydrocarbons were reliably identified, mostly by GC-MS. Repeated measurements of Kováts retention indices are presented as evidence for the reproducible manufacture of fused silica columns coated with this phase.     

Schrödinger Equation Solutions for the Central Field Power Potential Energy I. V(r) = V 0(r/a 0)2ν−2, ν ≥ 1

The solution of a generalized non-relativistic Schrödinger equation with radial potential energy V(r)=V ₀(r/a ₀)^2–2 is presented. After reviewing the general properties of the radial ordinary differential equation, power series solutions are developed. The Green's function is constructed, its trace and the trace of its first iteration are calculated, and the ability of the traces to provide upper and lower bounds for the ground eigenvalue is examined. In addition, WKB-like solutions for the eigenvalues and eigenfunctions are derived. The approximation method yields valid eigenvalues for large quantum numbers (Rydberg states).