多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

High spin limits and non-abelian T-duality

The action of the non-abelian T-dual of the WZW model is related to an appropriate gauged WZW action via a limiting procedure. We extend this type of equivalence to other σ-models with non-abelian isometries and their non-abelian T-duals, focusing on Principal Chiral models. We reinforce and refine this equivalence by arguing that the non-abelian T-duals are the effective backgrounds describing states of an appropriate parent theory corresponding to divergently large highest weight representations. The proof involves carrying out a subtle limiting procedure in the group representations and relating them to appropriate limits in the corresponding backgrounds. We illustrate the general method by providing several non-trivial examples.     

量子点单光子源及其制备方法研究进展

本文概述了量子保密通讯中面临的三大关键技术。并对关键技术之一的单光子源技术进行了重点介绍，如量子点作为单光子源的研究概况，单光子发射的实现、激子跃迁、双激子跃迁引起的聚束和反聚束效应和光子相关测量等。并介绍了国际上制备半导体自组装量子点在形貌、发光谱、极化以及近场光学用于量子点极化和激子发射等研究方面所取得的进展。     

Microfabrication of stacks of acoustic matching layers for 15 MHz ultrasonic transducers

This paper presents a novel method used to manufacture stacks of multiple matching layers for 15 MHz piezoelectric ultrasonic transducers, using fabrication technology derived from the MEMS industry. The acoustic matching layers were made on a silicon wafer substrate using micromachining techniques, i.e., lithography and etch, to design silicon and polymer layers with the desired acoustic properties. Two matching layer configurations were tested: a double layer structure consisting of a silicon–polymer composite and polymer and a triple layer structure consisting of silicon, composite, and polymer. The composite is a biphase material of silicon and polymer in 2-2 connectivity. The matching layers were manufactured by anisotropic wet etch of a (1 1 0)-oriented Silicon-on-Insulator wafer. The wafer was etched by KOH 40 wt%, to form 83 μm deep and 4.5 mm long trenches that were subsequently filled with Spurr’s epoxy, which has acoustic impedance 2.4 MRayl. This resulted in a stack of three layers: The silicon substrate, a silicon–polymer composite intermediate layer, and a polymer layer on the top. The stacks were bonded to PZT disks to form acoustic transducers and the acoustic performance of the fabricated transducers was tested in a pulse-echo setup, where center frequency, −6 dB relative bandwidth and insertion loss were measured. The transducer with two matching layers was measured to have a relative bandwidth of 70%, two-way insertion loss 18.4 dB and pulse length 196 ns. The transducers with three matching layers had fractional bandwidths from 90% to 93%, two-way insertion loss ranging from 18.3 to 25.4 dB, and pulse lengths 326 and 446 ns. The long pulse lengths of the transducers with three matching layers were attributed to ripple in the passband.     

Solitons and intrinsic localized modes in a one-dimensional antiferromagnetic chain

By use of the Hartree approximation and the method of multiple scales, we investigate quantum solitons and intrinsic localized modes in a one-dimensional antiferromagnetic chain. It is shown that there exist solitons of two different quantum frequency bands: i.e., magnetic optical solitons and acoustic solitons. At the boundary of the Brillouin zone, these solitons become quantum intrinsic localized modes: their quantum eigenfrequencies are below the bottom of the harmonic optical frequency band and above the top of the harmonic acoustic frequency band.     

CCD对高空间分辨率波前干涉检测的影响

推导并用实验验证了光强与入射波前在单位像元面积里成近似线性关系,从而得到入射波前经CCD采样后的功率谱密度（PSD）公式.根据该公式,模拟分析了影响CCD采集系统的系统传递函数的各个因素：入射波前、CCD的填充因子及CCD的曝光时间,得出了他们与系统传递函数的定性关系,并且通过实验明确CCD曝光时间对高空间分辨率波前检测不确定度的影响,为高空间分辨率干涉设计提供了理论依据.     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

弯曲氧化锌微米线微腔中的回音壁模

本文用微区共聚焦荧光光学显微镜在垂直于氧化锌微米线c轴的方向测量微米线上不同位置的光谱,通过对比直的和弯曲的微米线上TE和TM偏振的光谱,观察到了弯曲氧化锌微米线中不同位置的回音壁模式的移动,其机理是在弯曲应力作用下激子能级发生了移动,带边附近的介电常数也随之变化,导致微腔中的回音壁模式发生移动.     

Intracavity phase interferometry: frequency combs sensor inside a laser cavity

In traditional interferometric measurements, a physical quantity that changes the phase of a resonator is monitored through a change of its transmission. Interferometry inside a laser exploits the ultimate Q‐factor of that resonator, and converts the phase to be measured into a frequency. A mode‐locked laser with two intracavity pulses emits two frequency combs of the same repetition rate. The quantity to be measured (a sub‐nano displacement, a nonlinear index, an acceleration or rotation, a magnetic or electric field) produces a minute phase change ( rad) in one of the two intracavity pulses, which is converted into a frequency, measured by beating the two pulse trains emitted by the laser. This paper presents methods of operating mode‐locked lasers in which two independent pulses circulate, producing two frequency combs of the same repetition rate. Various examples of physical quantities that can be measured through this technique are presented.