CO_2焊接短路过渡过程的动态分析─短路液桥的动态变化与力学测算

ＣＯ＿２气体保护焊接是一种高效、节能和低成本的焊接方法，在钢结构焊接生产中得到了广泛的应用。但也存在着诸如：金属飞溅、焊缝成形较差等问题，要解决这些问题，必须首先对ＣＯ＿２焊接过程的电弧形态以及熔滴变化情况从理论上深入分析研究。本文以高速摄影与光线示波器同步进行拍摄，记录了ＣＯ＿２悍接短路过渡中熔滴的长大、缩颈、脱落的全过程以及相对应的电流电压波形。利用影片数据分析处理系统对所得影片及记录波形进行了分析处理，得到了熔滴过渡形成金属液桥爆断瞬间的最大电流值及所受合力的大小。从理论上更进一步研究了短路过渡的机理，建立了短路过渡的模型，这对正确调节焊接工艺规范，保证焊接质量具有重大的指导意义，研究结果表明：在常规短路过渡ＣＯ＿２焊接中，抑制飞溅是提高ＣＯ＿２焊接质量的关键，利用焊接规范来调节短路频率和短路峰值电流是抑制飞溅的主要途径。     

二维抛物型方程的高精度多重网格解法

提出了数值求解二维抛物型方程的一种新的高精度加权平均紧隐格式，利用Fourier分析方法证明了该格式是无条件稳定的，为了克服传统迭代法在求解隐格式是收敛速度慢的缺陷，利用了多重网格加速技术，大大加快了迭代收敛速度，提高了求解效率，数值实验结果验证了方法的精确性和可靠性。     

Microstructure characterization of porous silicon as studied by positron annihilation measurements at low temperatures and high vacuum

Atomic scale properties of thin porous silicon (PSi) layers, characterized by the formation of positronium, are investigated using positron annihilation lifetime spectroscopy in the temperature range 20-300 K under 10⁻⁷ Torr vacuum. The longest orthopositronium as well as the shortest parapositronium components are found to have quite low intensities in the thin layer at room temperature. It is also found that at temperatures ≤240 K, these two components do not show up in the spectrum. The reason for this absence of the longest lifetime component is suggested.     

耦合时间精度对模拟飞行器自由运动特性的影响

将亚迭代技术引入流体动力学和刚体动力学方程的耦合求解,获得细长三角翼极限环运动的规律.探讨耦合时间精度对飞行器非定常运动特性的影响,细长三角冀的大迎角自由滚运动最终形成极限环振荡的周期性自维持运动,不同攻角自由滚振幅阶跃式的变化特点较好地吻合了自由滚试验的规律.对于多系统耦合问题,亚迭代耦合求解(耦合时间精度为二阶)对物理时间步长的依赖性不明显;而存在一阶时间滞后的解耦推进方法的数值结果强烈地依赖于物理时间步长选取,稍大的时间步长将导致非物理的数值结果.     

New type of biosensor based on magnetic nanoparticle detection

A new type of biosensor has been developed based on detection of nanosized superparamagnetic particles that serve as labels in bioreactions. The method is based on non-linear magnetic material detection by a magnetic field having components at two frequencies f₁ and f₂. The response is measured at the combinatorial frequencies f_i=mf₁+nf₂, where m and n are integers, e.g., f_i=f₁±2f₂. Several highly sensitive readers of superparamagnetic particles have been designed and used for development of various formats of immunoassays, including those compatible with immunoconcentration and magnetic enrichment of antigens.     

Investigation on improving characteristics of two-cell SBS system with CCl4/C2H5OH liquid mixture

In order to improve the performance of the two-cell stimulated Brillouin scattering （SBS） system, this paper proposes the methods of using mixtures, which require amplifier media to have small absorption rate, and generator media to have high optical breakdown threshold and Brillouin frequency shift equal to that of the amplification media. The characteristics of the two-cell SBS system are studied experimentally by using CCl4 as amplifier medium and CCl4, C2H5OH and CCl4/C2H5OH liquid mixture as generator medium pumped by Nd：YAG Q-switched laser. The obtained results show that liquid mixture in generator cell improves the power load ability, phase conjugation fidelity, energy reflectivity （ER） and ER stability.     

A Law of Large Numbers for the Zeroes of Heine–Stieltjes Polynomials

We determine the limiting density of the zeroes of Heine–Stieltjes polynomials (or of any set of points satisfying the conclusion of Heine–Stieltjes Theorem) in the thermodynamic limit and use this to prove a strong law of large numbers for the zeroes.     

Families of Line-Graphs and Their Quantization

Any directed graph G with N vertices and J edges has an associated line-graph L(G) where the J edges form the vertices of L(G). We show that the non-zero eigenvalues of the adjacency matrices are the same for all graphs of such a family L ⁿ (G). We give necessary and sufficient conditions for a line-graph to be quantisable and demonstrate that the spectra of associated quantum propagators follow the predictions of random matrices under very general conditions. Line-graphs may therefore serve as models to study the semiclassical limit (of large matrix size) of a quantum dynamics on graphs with fixed classical behaviour.     

Ultrasonic techniques for nondestructive testing of standing trees

The aim of this study is to assess wood quality of standing trees with ultrasonic velocity methods. The ultrasonic techniques currently used are: scattering based techniques that use travel time and other wave parameters for measuring the elastic constants of wood, and ultrasonic tomographic imaging techniques which seek to provide a high resolution picture of the defect. Scattering based techniques were firstly used as nondestructive techniques with increment cores of 5 mm diameter. On these specimens measurements with bulk waves--longitudinal and shear were used to detect the influence of sylvicultural treatment (pruning) on wood quality and also to detect defects (slope of grain, wavy figures). High resolution imaging techniques were developed for imaging abnormalities induced by biological attacks of fungi or insects in standing trees. In this case, ultrasonic tomography refers to cross-sectional imaging of trees from data collected by illuminating the tree from different directions. Ultrasonic images were reconstructed from the time of flight. The images were reconstructed from 120 measurements in situ and through the bark with direct transmission technique, using 1 MHz transducers. The resolution is 5 cm.