Electrostatic Interactions Leading to Hierarchical Interpenetrating Electroconductive Networks in Silicon Anodes for Fast Lithium Storage

Recently, the frequency of combining MXene, which has unique properties such as metal-level conductivity and large specific surface area, with silicon to achieve excellent electrochemical performance has increased considerably. There is no doubt that the introduction of MXene can improve the conductivity of silicon and the cycling stability of electrodes after elaborate structure design. However, most exhaustive contacts can only improve the electrode conductivity on the plane. Herein, a MXene@Si/CNTs (HIEN-MSC) composite with hierarchical interpenetrating electroconductive networks has been synthesized by electrostatic self-assembly. In this process, the CNTs are first combined with silicon nanoparticles and then assembled with MXene nanosheets. Inserting CNTs into silicon nanoparticles can not only reduce the latter‘s agglomeration, but also immobilizes them on the three-dimensional conductive framework composed of CNTs and MXene nanosheets. Therefore, the HIEN-MSC electrode shows superior rate performance (high reversible capacity of 280 mA h⁻¹ even tested at 10 A g⁻¹), cycling stability (stable reversible capacity of 547 mA h g⁻¹ after 200 cycles at 1 A g⁻¹) and applicability (a high reversible capacity of 101 mA h g⁻¹ after 50 cycles when assembled with NCM622 into a full cell). These results may provide new insights for other electrodes with excellent rate performance and long-cycle stability.     

Self-Assembly of Benzimidazole-Derived Tris-NHC Ligands and AgI-Ions to Hexanuclear Organometallic Cages and Their Unusual Transmetalation Chemistry

Multi-ligand self-assembly to attain the Ag^I-N-heterocyclic carbene (NHC)-built hexanuclear organometallic cages of composition [Ag₆( 3 a , b )₄](PF₆)₆ from the reaction of benzimidazole-derived tris(azolium) salts [H₃- 3 a , b ](PF₆)₃ with Ag₂O was achieved. The molecular structures of the cages were established by X-ray diffraction studies along with NMR and MS analyses. The existence of a single assembly in solution was supported by diffusion-ordered spectroscopy (DOSY) ¹H NMR spectra. Further, transmetalation reactions of these self-assembled complexes, [Ag₆( 3 a , b )₄](PF₆)₆, with Cu^I/Au^I-ions provided various coinage metal-NHC complexes having diverse molecular compositions, which included the first example of a hexanuclear Cu^I-dodecacarbene complex, [Cu₆( 3 b )₄](PF₆)₆.     

Fabrication of photoluminescent liquid crystal device using an in situ self-assembled molecular layer of a pyrene derivative

An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays.     

Synthesis,Optoelectronic and Self‐Assembly Properties of Diazadioxaacene Derivatives

Two novel diazadioxaacene derivatives ( ADOP and ADOQ ) have been successfully synthesized and characterized. Their single crystal analyses disclose that molecule ADOP forms a twisted topology configuration, whereas ADOQ adopts reclining‐chair architecture. Both of them emit strong blue fluorescence in organic solvents. Moreover, they can self‐assemble to form regular nanobelts and nanowires, respectively, via a simple surfactant‐assisted method.     

Assembly of peptide–thiophene conjugates: the influence of peptide content and location

Biomolecule-directed self-assembly of π-conjugated oligomers has attracted great attention in the past decade. In this contribution, two conjugates composed of quaterthiophene and tetrapeptide (Gly-Val-Gly-Val) were synthesised, namely peptide–thiophene–peptide (PTP) and thiophene–peptide–thiophene (TPT), to investigate the influence of peptide content ratio and its location in the molecular structures on the nanostructures and properties of the assemblies. Both conjugates formed organogels consisting of left-handed twisted nanostructures; however, anti-parallel β-sheets were observed in PTP while parallel β-sheets were obtained for TPT, although in both cases oligothiophenes adopted an H-like stacking mode. Obvious solvent-induced supramolecular chirality inversion from the oligothiophene segment was observed for PTP while such phenomenon was not clear for TPT. PTP and TPT gels also showed different stabilities towards temperature increase, as evidenced by variable-temperature circular dichroism study. From the data, it is suggested that the rational design of the location and ratio of peptide plays a key role in constructing materials with determined properties based on peptide–thiophene conjugates.     

Modern Inorganic Aerogels

Essentially, the term aerogel describes a special geometric structure of matter. It is neither limited to any material nor to any synthesis procedure. Hence, the possible variety of materials and therefore the multitude of their applications are almost unbounded. In fact, the same applies for nanoparticles. These are also just defined by their geometrical properties. In the past few decades nano‐sized materials have been intensively studied and possible applications appeared in nearly all areas of natural sciences. To date a large variety of metal, semiconductor, oxide, and other nanoparticles are available from colloidal synthesis. However, for many applications of these materials an assembly into macroscopic structures is needed. Here we present a comprehensive picture of the developments that enabled the fusion of the colloidal nanoparticle and the aerogel world. This became possible by the controlled destabilization of pre‐formed nanoparticles, which leads to their assembly into three‐dimensional macroscopic networks. This revolutionary approach makes it possible to use precisely controlled nanoparticles as building blocks for macroscopic porous structures with programmable properties.     

Toward Fluorescence‐Based High‐Throughput Screening for Enantiomeric Excess in Amines and Amino Acid Derivatives

A highly accurate and reliable screening method for enantiomeric excess of amine derivatives in the presence of water is reported. The fluorescence‐based screening system has been realized by self‐assembly of chiral diol‐type dyes (BINOL, VANOL and VAPOL), 2‐formylphenylboronic acid, and chiral amines forming iminoboronate esters. The structure and chirality of the amine analytes determine the stability of the diastereomeric iminoboronate esters, which in turn display differential fluorescence. The fluorescence signal reflects the enantiomeric purity of the chiral amines and was utilized in high‐throughput arrays. The arrays were able to recognize enantiomeric excess of amines, amino esters, and amino alcohols. In addition to qualitative analysis, quantitative experiments were successfully performed. Studies of the role of additives such as water or citrate were carried out to gain insight into the stability of the iminoboronate esters. It is shown that the above additives destabilize less stable esters while the stable esters remain unchanged. Thus, the presence of water and citrate leads to increased difference between the diastereomeric iminoboronates and contributes to the enantiodiscrimination of the chiral amines.     

A Self-Assembled Cage with Endohedral Acid Groups both Catalyzes Substitution Reactions and Controls Their Molecularity

A self-assembled Fe₄L₆ cage complex internally decorated with acid functions is capable of accelerating the thioetherification of activated alcohols, ethers and amines by up to 1000-fold. No product inhibition is seen, and effective supramolecular catalysis can occur with as little as 5 % cage. The substrates are bound in the host with up to micromolar affinities, whereas the products show binding that is an order of magnitude weaker. Most importantly, the cage host alters the molecularity of the reaction: whereas the reaction catalyzed by simple acids is a unimolecular, S_N1-type substitution process, the rate of the host-mediated process is dependent on the concentration of nucleophile. The molecularity of the cage-catalyzed reaction is substrate-dependent, and can be up to bimolecular. In addition, the catalysis can be prevented by a large excess of nucleophile, where substrate inhibition dominates, and the use of tritylated anilines as substrates causes a negative feedback loop, whereby the liberated product destroys the catalyst and stops the reaction.     

Synthesis and Self‐Assembly of Cyclic 2,7‐Anthrylene Ethynylene 1,3‐Phenylene Ethynylene Trimer with a Planar Conformation

Cyclic arylene ethynylene hexamer 1 , composed of alternating 2,7‐anthrylene ethynylene units and meta‐phenylene ethynylene units, was synthesized. It shows C₃ symmetry and possesses a flat and rigid conformation with a large equilateral triangle‐like cavity. Macrocycle 1 self‐associates through π–π stacking interactions between the anthracene‐containing macrocyclic aromatic cores with indefinite‐association constant K_E=6980 m ^?1 in CDCl₃ at 303 K. Macrocycle 1 also self‐assembles into π‐stacked nanofibers in the drop‐cast film.