Oxygen diffusion in SrCe<Subscript>0.95</Subscript>Yb<Subscript>0.05</Subscript>O<Subscript>3−δ</Subscript>

¹⁸O/¹⁶O isotope exchange depth profiling (IEDP) combined with secondary ion mass spectrometry (SIMS) has been used to measure the oxygen tracer diffusivity of SrCe_0.95Yb_0.05O_3– between 800 °C and 500 °C at a nominal pressure of 200 mbar. The values of D* (oxygen tracer diffusion coefficient) and k (surface exchange coefficient) increase steadily with increasing temperature, and the activation energies are 1.13 eV and 0.96 eV, respectively. Oxygen ion conductivities have been calculated using the Nernst–Einstein equation. The transport number for oxide ions at 769 °C, the highest temperature studied, is only ~0.05. Moreover, SrCe_0.95Yb_0.05O_3– has been studied using impedance spectroscopy under dry O₂, wet O₂ and wet H₂ (N₂/10% H₂) atmospheres, over the range 850–300 °C. Above ~550 °C, SrCe_0.95Yb_0.05O_3– shows higher conductivity in dry O₂ than in wet O₂ or wet H₂; below that temperature the results obtained for the three atmospheres are comparable. Dry O₂ shows the highest activation energy (0.77 eV); the activation energies for wet O₂ and wet H₂ are identical (0.62 eV).Abbreviations HTPC high-temperature proton conductor - IEDP isotope exchange depth profiling - SIMS secondary ion mass spectrometryPresented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Synthesis and chelation properties of new polymeric ligand derived from 8-hydroxy-5-azoquinoline hydroxy benzene

8-Hydroxy-5-azoquinoline phenyl methacrylate-formaldehyde (8H5AQPMA-F) macromonomer was prepared from methacryloyl chloride with condensation products of 8-hydroxy-5-azoquinoline phenol-formaldehyde, and polymerized in DMF at 70 °C using benzoyl peroxide as free radical initiator. Poly(8H5AQPMA-F) was characterized by infrared and nuclear magnetic resonance spectroscopic techniques. Polychelates were obtained when the DMF solution of the resin containing few drops of ammonia was treated with the aqueous solution of Cu(II)/Ni(II). Elemental analysis of the polychelates indicates that the metal to ligand ratio was about 1:2. The IR spectra of polychelates suggest that the metals were coordinated through the oxygen of the phenolic-OH group and nitrogen of the quinoline ligand. The DRS and magnetic moment data indicate a square planar for Cu(II) complex whereas octahedral for Ni(II) complex. The TGA data revealed the thermal stability of the resin and the polychelates. X-ray diffraction study revealed the incorporation of the metal ions significantly enhanced the degree of crystallinity. The sorption properties of the chelate-forming resin towards various divalent metal ions [Cu(II) and Ni(II)] were studied as a function of pH and electrolyte.     

Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

Trace anion determination in concentrated hydrofluoric acid solutions by two-dimensional ion chromatography II. Method performance study with a hydroxide eluent and a low noise suppressor

The two-dimensional ion exclusion chromatography/ion chromatography (ICE-IC) approach is considered to be the method of choice for the determination of trace anions in concentrated hydrofluoric acid (48-50%, w/w). In order to achieve lower detection limits, this method was for the first time used with electrolytically generated and purified hydroxide eluents in combination with a low noise electrochemical suppressor. Compared to carbonate based eluents, the achieved gain in peak height sensitivity for chloride, sulfate, nitrate and phosphate is a factor of 6, 7, 16 and 13, respectively. The instrumental detection limits, based on the background noise, are 2, 0.2, 0.4 and 1.4 microg/kg HF 50% (w/w) for the same anions. Their method detection limits, calculated according to SEMI, are all within the 6-10microg/kg HF 50% (w/w) range and thus at least 10 times lower than the current Tier C grade requirements. The chromatographic run time could be shortened with some 10 min by the use of a relatively fast high-capacity hydroxide selective anion exchange column.     

TiO2/P(VdF-HFP)杂化纤维微孔膜的制备及其电化学性能

用电纺法制备了TiO₂/P(VdF-HFP)(聚偏氟乙烯-六氟丙烯共聚物)杂化纤维微孔膜, 用SEM观察了杂化纤维微孔膜的形貌, 并测算了这类由超细纤维相互搭接而形成的微孔膜的孔隙率. 这种微孔膜吸附LiPF₆/EC-DMC-EMC(碳酸乙烯酯-二甲基碳酸酯-碳酸甲乙酯)电解质溶液后得到凝胶聚合物电解质膜. 用电化学方法测试了聚合物电解质膜的离子电导率、锂离子迁移数等参数, 并研究了TiO₂纳米晶的掺入对聚合物电解质电化学性能的影响. 结果表明, TiO₂的掺入降低了P(VdF-HFP)聚合物基体的结晶度, 改善了凝胶聚合物电解质的低温电化学性能.     

Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Ion Association and Hydration in Aqueous Solutions of Nickel(II) and Cobalt(II) Sulfate

Aqueous solutions of nickel(II) and cobalt(II) sulfate have been investigated at 25 ^∘C by dielectric relaxation spectroscopy (DRS) over a wide range of frequencies (0.2 ≤ ν (GHz) ≤ 89) and salt concentrations (0.025 ≤ c(mol-L⁻¹) ≤ 1.4). The spectra indicate, as for MgSO₄(aq) studied previously, the simultaneous presence of double solvent-separated, solvent-shared and contact ion pairs in both NiSO₄(aq) and CoSO₄(aq). The stepwise formation constants for each ion-pair type and the overall association constant, obtained from the data are in good agreement with ultrasonic relaxation and other estimates. The DR spectra at higher concentrations (c ≥ 0.5 mol-L⁻¹) suggest the existence of a nonlinear triple ion M₂SO₄²⁺(aq). Consistent with the very strong hydration of the salts, which have ‘effective’ hydration numbers approaching 27 at infinite dilution, there are no significant differences in any of the relaxation or thermodynamic parameters for NiSO₄(aq) and CoSO₄(aq), except that the triple ion appears to be somewhat more stable for the latter.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。