Real-time onboard wind and windshear determination,part 2: Detection

This paper is concerned with windshear detection in connection with real-time wind identification (Ref. 1). It presents a comparative evaluation of two techniques, one based on the shear/downdraft factor and one based on the wind difference index. The comparison is done with reference to a particular microburst, that which caused the 1985 crash of Flight Delta 191 at Dallas-Fort Worth International Airport.The shear/downdraft factor has the merit of combining the effects of the shear and the downdraft into a single entity. However, its effectiveness is hampered by the fact that, in a real situation, the windshear is accompanied by free-stream turbulence, which tends to blur the resulting signal. In turn, this results in undesirable nuisance warnings if the magnitude of the shear factor due to free-stream turbulence is temporarily larger than that due to true windshear. Therefore, proper filtering is necessary prior to using the shear/downdraft factor in detection and guidance. One effective way for achieving this goal is to average the shear/downdraft factor over a specified time interval . The effect of on the average shear/downdraft factor is studied.     

Real-time onboard wind and windshear determination,part 1: Identification

Standard wind identification techniques employed in the analysis of aircraft accidents are post-facto techniques; they are processed after the event has taken place and are based on the complete time histories of the DFDR/ATCR data along the entire trajectory. By contrast, real-time wind identification techniques are processed while the event is taking place; they are based solely on the knowledge of the preceding time histories of the DFDR/ATCR data.In this paper, a real-time wind identification technique is developed. First, a 3D-kinematic approach is employed in connection with the DFDR/ATCR data covering the time interval preceding the present time instant. The aircraft position, inertial velocity, and accelerometer bias are determined by matching the flight trajectory computed from the DFDR data with the flight trajectory available from the ATCR data. This leads to a least-square problem, which is solved analytically every seconds, with / small.With the inertial velocity and accelerometer bias known, an extrapolation process takes place so as to predict the inertial velocity profile over the subsequent -subinterval. At the end of this subinterval, the extrapolated inertial velocity and the newly identified inertial velocity are statistically reconciled and smoothed. Then, the process of identification, extrapolation, reconciliation, and smoothing is repeated. Subsequently, the wind is computed as the difference between the inertial velocity and the airspeed, which is available from the DFDR data. With the wind identified, windshear detection can take place (Ref. 1).As an example, the real-time wind identification technique is applied to Flight Delta 191, which crashed at Dallas-Fort Worth International Airport on August 2, 1985. The numerical results show that the wind obtained via real-time identification is qualitatively and quantitatively close to the wind obtained via standard identification. This being the case, it is felt that real-time wind identification can be useful in windhsear detection and guidance, above all if the shear/downdraft factor signal is replaced by the wind difference signal (Ref. 1).This paper and its companion (Ref. 1) are based on Refs. 2–4.This research was supported by the Aviation Research and Education Foundation and by Texas Advanced Technology Program, Grant No. TATP-003604020.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

Boundary value estimates for harmonic forms

We prove a bound for the -norm of harmonic forms in terms of certain -norms of their normal and tangential components. In turn, this is used to show the -norm equivalence of the normal and tangential components of harmonic forms on manifolds.

     

A micro-scale method employing surface plasmon resonance detection for the determination of conditions for immunoaffinity chromatography of proteins

Summary The BIAcore^TM Biosensor System utilizes a detection principle known as Surface Plasmon Resonance (SPR) which, in simple terms, detects changes in the refractive index of a solution in contact with a gold film. The gold film is surface modified with carboxymethylated dextran to produce a hydrophillic matrix onto which macromolecules may be covalently immobilized. In this respect, the BIAcore^TM is similar to any other insoluble matrix, such as a chromatographic support. The SPR detection principle, however, allows one to directly visualize the interaction under study, in real time and without the need for reporter molecules such as enzyme-labels. In addition, the very small sample requirements, automated robotics unit and ease of data analysis suggest the potential use of the BIAcore^TM instrumentation for assay development and possibly process development, especially where bio-specific interactions such as immunoaffinity chromatography are used as a step in the process. In this report, we demonstrate the use of the BIAcore^TM SPR detector for the micro-scale determination of conditions for immunoaffinity chromatography of soluble complementreceptor 1, sCR1.     

A specific sensitive HPLC method for determination of plasma dopamine

Summary We describe here a sensitive, selective and rapid method to quantitate plasma catecholamines, especially dopamine, using high-performance liquid chromatography with electrochemical detection. This method requires a 10-minute run time and has a threshold for detection of 2 picograms, (10pg/ml).A number of commonly employed mobile phases for catecholamine analysis have been tested and have failed to detect dopamine in biological samples. Neither acetonitrile (3–7%) or methanol, (5–8%) in the mobile phase has produced consistently interpretable data either due to inability to detect or interference from co-eluting substances. Optimal detection was achieved with a mobile phase containing sodium acetate (6.8g), citric acid (5.9g), EDTA (48mg), di-n-butylamine (270l), Na-1-octane sulfate (850mg), methanol (100 ml) (amounts refer to 1 liter aqueous solution) (pH 4.3). The mobile phase was passed through a Waters 5 resolve C₁₈ column using a Waters 590 pump and m460 electrochemical detector and 740 data module, Flow rate was 0.9ml/min. Using this method, normal values in human and swine left ventricular myocardium and human and swine plasma have been established for norepinephrine, epinephrine, and dopamine.     

An integrated coupled column liquid chromatography system for the determination of leukotriene metabolites in biological samples

Summary A fully integrated chromatographic system was developed for the determination of leukotrienes in biological samples using photodiode-array detection (PDAD), which eliminates time consuming manual sample handling steps. A special solid phase extraction, (SPE) methodology for leucotriene metabolite stability was developed which increased the recoveries and eliminates the contamination risk of biological samples. The inherent instability (autooxidation) of many of the leukotriene mediators, and the adsorption effects onto exposed surfaces in vials and in the chromatographic system were found to be very important parameters to control in order to circumvent high loss of sample analytes. By binding the cell supernatants to the functionalities of the SPE support stabilised these mediators. Cell culture samples were eluted through a disposable C₁₈ SPE column. The SPE columns were allowed to thaw and deposited in an automated sample handling unit (ASPEC XL). Desorption of the analytes was followed by a second on-line SPE step, to eliminate remaining interfering matrix compounds. Typical recoveries when stored at −70°C were in-between 55–97% except for (LTE₄) which was found to be around 40% after 72 days of storage. Seven reversed-phase packings were studied. Selectivity factors, as well as the separation efficiencies, were found to differ for the various C₁₈ bonded silica stationary phases. This integrated on-line column liquid chromatographic system was applied to the determination of leukotriene B₄, leukotriene C₄, leukotriene D₄, leukotriene and E₄ in human cell extracts using prostaglandin B₂ as the internal standard. More than 1500 biological samples were analysed. Some validation data are presented for unattended operations.     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin     

In Situ Amperometric Detection of Vesicles and Microgel Phases in an Aggregating System: Calcium Alginate

In situ amperometric characterization of an aggregating system in terms of molecular adsorption and single microparticle interactions at the electrode interface is demonstrated using a model system: alginate/Ca(II) in an aqueous electrolyte solution. Recording of chronoamperometric curves of oxygen reduction at the dropping mercury electrode is designed for detection of dip‐shaped signals of individual gel microparticles. By addition of Ca(II) decrease of alginate adsorption is accompanied by appearance of signals indicating vesicle type association of alginate molecules and microparticles of gel phase. AFM imaging provided evidence of initial stage in calcium alginate gel formation.     

The identification of nitrated polycyclic aromatic hydrocarbons in diesel particulate extracts and their potential formation as artifacts during particulate collection

Summary The highly complex matrix of diesel particulate extracts was analyzed for nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using fused-silica capillary-column gas chromatography along with a thermionic nitrogen-phosphorus detector (TID) and high-performance liquid chromatography followed by on-line catalytic reduction of the nitro-PAH to amino-PAH and subsequent fluorescence detection. Positive isomer identification and quantitation of nitro-PAH are from retention times of authentic standards and their mass spectra. The ease of nitro-PAH formation by nitration of PAH raises the question regarding the origin of these species, whether they are produced as “native” products during the engine combustion process and/or in the exhaust, or instead, formed as the result of chemical conversion to produce artifacts during the sampling procedure. This problem is assessed examing 1-nitropyrene-concentration in particulates of three light-duty diesel engines for different sampling times. 1-Nitropyrene concentrations show only a moderate increase with sampling time under average sampling conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984