Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

氢化物－气相色谱的元素光度检测器

研究开发的一种新型的元素光度检测器主要用于锗、砷、锡和锑的氢化物气相色谱检测，具有高灵敏，高选择性。它是在普通火焰光度检测器的基础上加装了特制的滤光片改制而成的。对锗、砷、锡和锑的检测限分别为３．０×１０￣（－１１）ｇ、７．０×１０￣（－１１）ｇ、７．０×１０￣（－１０）ｇ和１．１×１０￣（－８）ｇ，相对标准偏差分别为１．８％、２．４％、２．６％和３．０％。     

毛细管电泳安培检测法在中草药分析中的应用

由于毛细管电泳安培检测法(CE-AD)具有高的分离效率和低的检测限的优势,现已在分析科学的各个领域,特别是在药物行业中得到广泛应用。中草药的研究在我国医药事业中占有重要的地位,采用CE-AD分离并检测中草药中有效成分对于促进中草药的药理药效研究及中草药的定量分析和质量监测等有重要意义。本文综述了CE-AD在中草药及中药复方制剂中有效成分分析中的应用,评述了该法与其他分离分析方法相比在中草药分析中的优越性,并对CE-AD在中草药分析中的发展进行了展望。     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

On-line determination of organophosphorus pesticides in water by solid-phase microextraction and gas chromatography with thermionic-selective detection

This paper describes the extraction of 49 organophosphorus pesti-cides (OPPs) from water samples using solid-phase microextraction (SPME). Three fibers, including a 15-μm XAD-coated fiber, a 85-μm polyacrylate-coated fiber, and a 30-μm polydimethylsilox-ane-coated fiber (PDMS), were evaluated here. The effects of stirring and the addition of NaCl to the sample were examined for the polyacrylate-coated fiber. The precision of the technique was examined for all three fibers and the extraction kinetics were investigated using the XAD- and polyacrylate-coated fibers. With some exceptions, the XAD- and polyacrylate-coated fibers performed better than the PDMS-coated fiber. The superiority of the XAD-nd polyacrylate-coated fiber. The superiority of the XAD- and polyacrylate-coated fibers over the PDMS-coated fibers can be attribuibuted to the aromatic functionalities of the XAD and the polar functionalities in the polyacrylate. The relatively high percent RSDs indicate that the SPME technique needs to be further refined before it can be used for anything other than screening. A more effective form of agitation than mechanical stirring may be neccessary to reduce variability and achieve a faster equilibrium between the sample and the SPME fiber.     

Determination of Gossypol in Trace Level by Flow Injection Analysis with Chemiluminescence Detection

Gossypol, [1, 1′, 6, 6′, 7,7′-hexahydroxyl-5,5′-diisopropyl-3,3′-dimethyl-(2,2′-binaphtha- lene)-8,8′-dicarboxaldehyde] is a polyphenolic yellow compound naturally occurring in various parts of cotton plants1. The compound has been associated with     

非水介质毛细管电泳电导检测舒血宁片中槲皮素含量

以甲醇：水＝70：30的体系为分离介质，柠檬酸－三（羟甲基）氨基甲烷（Citric acid-Tris)为支持电解质，使用电导检测，对槲皮素及其制剂舒血宁片进行了毛细管电泳分离检测，对电泳介质的种类、浓度、表观pH值以及操作电压和进样时间对分离的影响进行了研讨，并对分离检测机理进行了探讨。建立的测定槲皮素的方法的线性范围为：8．0－160．0mg/L；峰面积的RSD（n=6)为1．7％，检出限为1．0mg/L；样品加标回收率为92．8％－98．2％。     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.     

Trace analysis of selected benzidine and diaminodiphenylmethane derivates in urine by means of liquid chromatography using precolumn sample preconcentration,UV and electrochemical detection

Summary For the title compounds 4,4-DADPM, MOCA, 3,3-DCB, 4-ADP and 4-ADPA listing on the EPA priority pollutant list, an analytical practicable, reliable, reproducible and sensitive procedure is required. Therefore a new method has been developed for the routine determination of these toxic aromatic amines in urine at the ppb level. The quantitative determination of amines is a suitable procedure of occupationally exposed persons. Urine sample preparation is done using simple liquid-liquid extraction followed by a precolumn enrichment (PRP₁-material; Hamilton). Breakthrough measurements were done using an enrichment column packed with PRP₁ material. The capacities of the studied amines ranged from 21.9mg/g to 96.6mg/g, while influent concentrations differed from 28.3mg/l to 332.0mg/l. The advantages of electrochemical detection regarding to selectivity and sensitivity are clearly indicated in this paper. Separation has been achieved applying reversed-phase-high-performance-liquid chromatography (LiChrosorb RP 18/5m) followed by electrochemical or UV-detection. The detection limits employing an electrochemical detector at a potential of 1 V range from 2.2ng to 12.1ng. UV detection at 254 nm and 280 nm is about 10–100 times less sensitive. Recoveries from spiked water samples at the 5ppb levels were 75% to 96% respectively. The standard deviation of the developed procedure varies from 5.3% to 14%. Day-to-day repeatability is good.