塑料光纤纤端光场测试结果及分析

对纤端光场进行了理论分析,分别利用塑料光纤和多模光纤作为接收光纤对塑料光纤的出射纤端光场进行了测量,并与理论分析结果进行了比较,给出了合理的调和参数.传输距离较长的塑料光纤由于高阶模的泄漏,纤端光场分布非常接近高斯分布.实验结果表明了理论分析结果和调和参数选择的合理性.     

Characterization of the Phytochemical Composition and Bioactivities of Anacyclus maroccanus Ball. and Anacyclus radiatus Loisel Aerial Parts: Preliminary Evidence for the Possible Development of Moroccan Plants

In the present study, the phytochemical composition and bioactivities of A. maroccanus (AM) and A. radiatus (AR), two ecotypes collected in the Demnate road and Essaouira regions, respectively, were studied to highlight a pharmacological interest and to enable possible pharmaceutical development. To this end, methanolic and ethyl acetate extracts were prepared for each ecotype by fractionation; next, their phytochemical composition was evaluated by spectrophotometric and chromatographic analysis. Moreover, in line with the available evidence for Anacyclus spp. and their traditional use, a screening of bioactivities, including antioxidant, hypoglycemic, antiglycative, chelating, and antibacterial activities, was performed. The extracts were characterized by high amounts of polyphenols, tannins, and flavonoids, especially in the methanolic extracts; these samples were also enriched in carotenoids despite a lower chlorophyll content. Chlorogenic acid and rutin were the major identified compounds. The extracts also showed interesting hypoglycemic, antiglycative, and antibacterial properties, although with differences in efficacy and potency. Present results provide more scientific basis to the ethnopharmacological uses of Anacyclus spp. and suggest a further interest in AM and AR ecotypes as natural sources of bioactive compounds and/or phytocomplexes for possible pharmaceutical and nutraceutical developments.     

黏弹性接触界面端附近的奇异应力场

研究蠕变加载条件下线黏弹性材料接触界面端附近的奇异应力场问题.考虑接触界面的摩擦,假设界面端的滑移方向不改变,相对滑移量微小,且其与位移同量级,由此线性化局部边界条件,根据对应原理得到Laplace变换域中的界面端应力场,导出时域中奇异应力场的卷积积分表达式.对卷积积分核函数进行数值反演,考虑接触材料的两类组合,一是持久模量具有量级上的差异,另一是持久模量接近相同.算例结果证实核函数可以用准弹性法求得的解析式较准确地近似.在此基础上,利用积分中值定理,并引入各应力分量的修正系数,得到黏弹性奇异应力场的简化式.结合核函数的数值反演结果分析修正系数表达式的取值范围,得到如下结论,若两相接触材料的持久模量相差很大,可以采用准弹性解的解析式较准确地描述界面端的奇异应力场;一般情况下,应力场不存在统一的奇异值和应力强度系数,当采用类似于准弹性解的表达式近似给出黏弹性应力场时,可以估计此近似描述的误差限.文中最后采用有限元分析黏弹性板端部嵌入部位的应力场,算例包括了黏弹性板与弹性金属支承、黏弹性板与黏弹性垫层所形成的滑移接触界面端,利用黏弹性有限元的数值结果验证理论分析所得结论的有效性.      

树枝状嵌段聚合物D-PCL-b-PS在不对称末端受限条件下的结晶行为

研究了树枝状嵌段聚合物聚(ε-b-己内酯)-b-聚苯乙烯(D-PCL-b-PS)的分子结构对PCL链段受限结晶行为的影响.首先,通过活性正离子开环聚合(ROP)合成了树枝状的嵌段聚合物D-PCL.在此基础上用原子转移自由基聚合(ATRP)的方法,合成了树枝状的嵌段聚合物D-PCL-b-PS,在结晶的PCL链段的两个末端...     

仪器分析教学中通过实例培养学生的创新能力——电位滴定终点确定的新方法

以电位滴定终点确定新方法探讨研究为例,从5个方面介绍将创新能力培养融入基础课教学的探索。通过该研究提高了学生基础课学习热情与学习质量。首先改进了二次差值微商终点计算方法,通过Excel 计算Δ2E/ΔV-V 二次差值微商法数据表中的最高点与最低点直线线性方程 y=ax+b,令 y=0, x=-b/a即为终点。另外,研究得到了模拟滴定曲线微分法确定电位滴定终点的新方法。用Excel 对滴定曲线进行三次方程模拟即:y=ax3+bx2+cx+d,二次微分后得到: d2y/dx2=6ax+2b, 当d2y/dx2=0,对应的x=-b/3a处即为滴定终点。2     

螺旋CT成像联合血清copeptin、IL-18水平检测在急性脑梗死患者神经功能及预后评估中的应用价值

本文选取74例急性脑梗死(ACI)患者作为研究对象,入院时根据美国国立卫生院卒中量表(NIHSS)评分分为重度组(NIHSS评分＞15分,n=21)、中度组(NIHSS评分5?15分,n=24)、轻度组(NIHSS评分＜5分,n=29),均接受血清copeptin和IL-18水平检测及螺旋CT成像检查.结果发现,随AC...     

子弹冲击下TiNi固支梁的结构动态响应特性研究

采用改装的霍普金森压杆装置结合数值模拟对伪弹性TiNi合金固支梁的结构动态响应特性进行了研究。结果表明,在子弹冲击下,撞击点和固定端附近首先发生相变,并随着载荷增加,进一步产生相变铰,梁演变为二杆铰接机构。由于轴力作用,此处相变铰为拉伸侧的单边铰。与传统塑性铰不同,卸载后相变铰完全消失,梁回复原状没有残余变形。此外,对固支边界条件的实现及其对实验结果的影响进行了专门研究。     

基于MATLAB的GPS软件接收机捕获与跟踪算法实现

研究了GPS软件接收机的捕获和跟踪算法,并基于Matlab软件平台和射频前端在PC上实现了GPS软件接收机样机。介绍了GPS软件接收机的结构和数据采集硬件,讨论了GPSC/A码的特性、产生原理以及捕获过程。针对传统的串行搜索算法慢的缺点以及高动态GPS软件接收机的特点,在该样机中实现了快速的基于循环卷积的并行捕获算法,并联合使用超前滞后环和对相位反转不敏感的科斯塔斯锁相环分别对码相位和多普勒频偏进行跟踪,解调得到导航电文。仿真和测试结果表明,使用GPS软件接收机进行信号处理的思想使用户在算法处理和软件升级等方面具有更大的灵活性,可应用于下一代任何全球导航卫星定位系统(GNSS)和空基增强系统(SBAS)接收机的设计。     

Traveling Fronts in Monostable Equations with Nonlocal Delayed Effects

In this paper, we study the existence, uniqueness and stability of traveling wave fronts in the following nonlocal reaction–diffusion equation with delay

DPD Simulation on the Transformation and Stability of O/W and W/O Microemulsions

The dissipative particle dynamics simulation method is adopted to investigate the microemulsion systems prepared with surfactant (H1T1), oil (O) and water (W), which are expressed by coarse-grained models. Two topologies of O/W and W/O microemulsions are simulated with various oil and water ratios. Inverse W/O microemulsion transform to O/W microemulsion by decreasing the ratio of oil-water from 3:1 to 1:3. The stability of O/W and W/O microemulsion is controlled by shear rate, inorganic salt and the temperature, and the corresponding results are analyzed by the translucent three-dimensional structure, the mean interfacial tension and end-to-end distance of H1T1. The results show that W/O microemulsion is more stable than O/W microemulsion to resist higher inorganic salt concentration, shear rate and temperature. This investigation provides a powerful tool to predict the structure and the stability of various microemulsion systems, which is of great importance to developing new multifunctional microemulsions for multiple applications.