Electro-mechanical behavior of single twisted high-temperature superconducting tape under transverse Lorentz force

In recent years, several cabling methods of high temperature superconducting (HTS) cable have been proposed; e.g., the conductor on a round core cable (CORC), the Roebel assembled coated conductor cable, the helical twisted stacking-tape cable (TSTC) and the twisted-stack slotted core HTS cable (TSSC). These cabling methods allow the high temperature superconducting tapes widely used in the high-field magnets. The single superconducting tape performance under applied loads directly relates to the transport performance of the cable and the choice of the cabling method. In this paper, we investigate the effect of twisting morphology on the electro-mechanical properties of HTS tapes. Particular attention is given to the transverse Lorentz force of a pre-twisted HTS tape. The analytical solution of the deflection of the HTS tape under transverse Lorentz force is derived. Then, the current distribution and AC loss of the tape are calculated by using H-formulation. The effects of twist angle and loading conditions are examined for different HTS tape lengths. The results show that the stiffness resistance ability to Lorentz force of the HTS tape can be increased in several ranges by increasing the twist angle. The twisting structure can also reduce current degradation and AC loss, and thus enhance the transport capacity of HTS tape. This study helps understand the electro-mechanical properties of pre-twisted HTS tapes and provides theoretical reference for the design of novel HTS cable structures.     

The Design of Passive Optical Networking+Ethernet over Coaxial Cable Access Networking and Video-on-Demand Services Carrying

Abstract

Video on demand is a very attractive service used for entertainment, education, and other purposes. The design of passive optical networking+Ethernet over coaxial cable accessing and a home gateway system is proposed. The network integrates the passive optical networking and Ethernet over coaxial cable to provide high dedicated bandwidth for the metropolitan video-on-demand services. Using digital video broadcasting, IP television protocol, unicasting, and broadcasting mechanisms maximizes the system throughput. The home gateway finishes radio frequency signal receiving and provides three kinds of interfaces for high-definition video, voice, and data, which achieves triple-play and wire/wireless access synchronously.     

Indirect measurement of AC current distributions in HTS tapes by a pickup coil method

It is necessary to develop HTS conductors with a large current capacity and low AC loss characteristics for practical use of HTS power devices. For large capacity power applications, HTS tapes such as Bi-2223 tapes and YBCO coated conductors are assembled. So, it is important to evaluate the characteristics of current distributions in such assembled HTS tapes. However, an adequate measurement method has not been established. In this study, we have tried the development of an indirect measurement method to evaluate the current distributions in stacked HTS tapes. In this method, the current distributions are indirectly found from the results of the field distributions measured by a pickup coil located around the surface of the sample tapes. To confirm the accuracy and the sensitivity of this method, current distributions in a test conductor made of copper tapes are measured. Numerical and measured current distributions are compared. Using this method, the current distributions in stacked Bi-2223 tapes are measured at room temperature and 77 K. On the basis of the obtained results, the characteristics of the AC current distributions in the HTS tapes are discussed.     

ITER高温超导电流引线的高安全分流器研究

电流引线是室温电源电缆与低温磁体之间的电连接部件.高温超导材料在液氮温度下具有零电阻率和低热导率的特性,用它做成的电流引线可以大大减小低温系统的热负荷,从而减少制冷设备投资及系统运行费.高温超导电流引线可以分为阻性换热器段和高温超导段两部分(其中还包括各部件间的连接部分).高温超导段的分流器设计关系到冷端热负荷大小以及超导段失超后的安全问题.为了研究国际热核聚变试验堆(ITER)电流引线高安全性能,专门设计、试验了68kA引线的1/90实验样品.本文通过对比全CuBe(cu-2%Be)分流器、全不锈钢分流器和二元分流器的失冷故障(LOFA)实验结果,证明二元分流器能够克服安全性和冷端漏热矛盾,可以满足ITER高安全性的要求.     

Application of High Pressure-DTA for High Pressure-liquid Phase Epitaxy of Doped Mercury and Thallium HTS Formations

The fabrication method of superconducting thin films of compositions HgBa₂Ca₂Cu₃O_8+δ (Hg-1223) and Tl₂Ba₂CuO_y (2201) on single-crystalline SrTiO₃ and LaAlO₃ substrates is reported. The highest obtained T _c was 134 K and J _c over 10⁶ A cm^–2 at 77 K. High pressure DTA(HP-DTA) was applied to grow mercury- and thallium-based high-temperature superconducting crystals and thin films, to identify melting points of particular phases within these oxide systems and determine suitable processing conditions. The DTA system operates at the: maximum temperature of 1200°C, volume up to 5 cm³, working pressure up to 1.5 GPa and at a working atmosphere — inert gas with up to 25% oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

The effect of calcination conditions on the superconducting properties of Y−Ba−Cu−O powders

Calcination conditions of the precursor powders, i.e. temperature, type of atmosphere and duration, were determined with a view to obtain superconducting powders with the most advantageous physico-chemical properties. Investigated were powders in the Y?Ba?Cu?O system prepared by the sol-gel method. Thermogravimetric examinations of the powders have revealed that the decomposition kinetics of BaCO₃ determines the formation rate of the superconducting YBa₂Cu₃O_7?x (‘123’) phase. It follows from the decomposition kinetics of BaCO₃ that the process is the most intensive in argon, whereas in static air and oxygen it is the slowest. The phase composition analysis (XRD) and low-temperature magnetic susceptibility measurements of the calcinated powders, confirm the above mentioned changes in the decomposition kinetics. The reaction of barium carbonate can be completed if the calcination process is conducted at the temperature of 850°C for 25 h, yielding easily sinterable powders for obtaining single-phase superconducting bulk samples with advantageous functional parameters.     

Preparation of Micron-size Functional Fluorescent Microspheres

As a kind of special functional microspheres, fluorescent polymer microspheres could be used in cell label and separation, blood flow assay, flow cytometer marking, chemical reaction assay,and in analyst of the transform and diffusion of particles in soil 1. However, one of the most important applications of fluorescent microspheres is in the high-throughput screening of drugs (HTS) 2. Through affinity interaction, radioactive ligands (latent drugs) are bound to fluorescent microspheres covered by receptor, and luminescence is produced by radioactivity, so ligands can be assayed and screened.In this study, we developed a technique for preparing micron-size fluorescent microspheres with different functional groups. The methods included the synthesis of micron-size polystyrene microspheres through the dispersion polymerization of styrene in different media such as ethanol,ethanol-water, and isopropanol; the functional polystyrene microspheres were prepared by introduction of functional monomers into the reaction system of styrene; the functional fluorescent microspheres were obtained by the way of dying functional microspheres in the fluorescent material's ethanol solvent.The average diameter of microspheres was in the range of 1～10 μm, and the distribution was normal distribution. The functional groups included -OH, -CHO, -COOH, -CONH2, and SO3H. The absorbing spectrum and exciting spectrum were tested, the results showed that the maximal absorbance of fluorescent microsphere was near 306.5 nm, and its maximal excitation was near 362 nm. The excitation spectrum of fluorescent material (DPO) and fluorescent microspheres were shown in figure 1, and it indicated that the developed fluorescent microspheres showed the same excitation behavior like DPO, which related to the fluorescent microspheres had stable luminescence property.     

A Novel Model for Protein Immobilization on Microspheres

The immobilization of proteins, especially receptor proteins commonly used in high through-put screening of drugs (HTS), have received great attention in recent years. There are many successful isothermal models for describing the adsorption of protein onto solid surface, such as Langmuir model, Bi-Langmuir model, Fowler model, Freundlich model, Freundlich-Langmuir model and Tekmin model etc. In all these models, Langmuir model was the most favorable one model accepted by many researchers, but the experimental results showed that it was not entirely fit to all adsorption behaviors. So new models were required for describing protein adsorption onto microspheres in different conditions.In our research, a novel isothermal model, including Langmuir and other adsorbing behaviors was presented basing on the holding degree of surface active sites and the interaction styles of protein immobilization. In Langmuir model, the adsorbing amount of protein was described as [PS] =Km[P]/1 + K[P], where [PS] was the concentration of adsorbed protein, [P] was the concentration of freeprotein at equilibrium state, and Km and K was constant. According to the interactions of protein and ligands, there were three patterns in the interactions of protein and ligands. On the similar assumption that the interaction of protein and microspheres were three styles, and based on the definition of the holding degree of surface active sites (Y), three adsorption behaviors could be described as Y K[ P ]φ/ K[P]φ+1 or ln K + φ ln[P] =ln(Y/1-Y) in which [P] was the concentration of free protein at equilibrium state, and φ and K was constant. Different scale of φ presented different adsorption behaviors, especially when φ was 1, the adsorption behavior was Langmuir adsorbing model. Figure I indicated the different adsorbing results in different adsorption behaviors (φ＞1, φ＜1,and φ=1).     

Exploring the effect of radiation crosslinking on the physico‐mechanical,dynamic mechanical and dielectric properties of EOC–PDMS blends for cable insulation applications

This work focuses on the effect of electron beam irradiation on the physico‐mechanical, dynamic mechanical and dielectric properties of blends based on ethylene octene copolymer (EOC) and poly dimethyl siloxane (PDMS) rubber. It is found that electron beam irradiation caused considerable improvement in the physico‐mechanical properties; the tensile strength was enhanced by nearly 35% for 70:30 EOC:PDMS blend. Phase morphology of the blends analyzed before irradiation by scanning electron microscopy (SEM) exhibited droplet/matrix morphology with sizes of the PDMS rubber domain varying from 0.55 µm to 0.47 µm as the amount of PDMS rubber decreased from 30 wt% to 10 wt%. This reduction in the PDMS rubber domain has been correlated with the physico‐mechanical properties of the blends. Further, the dynamic mechanical properties and creep behavior of these EOC:PDMS blends before and after irradiation has been studied. It is inferred that the 70:30 blend after radiation crosslinking shows a 17% decrease in the creep compliance, i.e. higher creep resistance compared to neat blends. All the radiation crosslinked blends exhibited lower dielectric constant, lower dielectric loss and higher electrical resistivity as compared to the virgin blends which makes it suitable for cable insulating application. Copyright © 2016 John Wiley & Sons, Ltd.     

Research on mechanical and dielectric properties of XLPE cable under accelerated electrical‐thermal aging

Research into the electrical‐thermal aging properties of cross‐linked polyethylene (XLPE) cable has great significance, because of its wide application. This study conducted accelerated electrical‐thermal aging tests on 10‐kV XLPE cable in order to assess the cable's mechanical and dielectric properties. After being aged by applying 34.8‐kV AC voltage at the four temperatures of 90, 103, 114, and 135°C, the cable samples were taken out in five stages according to the aging time and cut into slices. The slices were conducted experiments to test the breaking elongation, tensile strength, gel content, breakdown voltage, and frequency spectrums of the dielectric constant and dielectric loss. The results demonstrate that the mechanical strength and gel content of XLPE vary greatly under different aging temperatures, a finding that is associated with the crystallization characteristics of the material. The breakdown voltage shows a slight decreasing trend with aging time. The dielectric constant decreases with aging time in high‐frequency areas (10³–10⁶ Hz), while the dielectric loss factor increases with aging time at low frequencies (10^?2–0 Hz). These two parameters can be used to characterize the degree of aging in cable. Copyright © 2016 John Wiley & Sons, Ltd.