一种新型的高功率高频率同轴渡越时间振荡器

提出了一种高频率和高功率的渡越时间振荡器,并且对其进行了理论和数值研究。这种振荡器采用同轴结构,功率容量大,不需要外加引导磁场聚焦电子束,波束相互作用区短,保持了传统渡越时间振荡器在结构上的简单性和输出信号的稳定性;运用电压为225kV和电流为11kA的电子束进行模拟,在X波段获得了峰值功率为1.4GW,频率为8.335GHz的微波输出。     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

Monte Carlo simulation of GM probe and NaI detector efficiency for surface activity measurements

This paper deals with the direct measurement of total (fixed plus removable) surface activity in the presence of interfering radiation fields. Two methods based on Monte Carlo simulations are used: one for a Geiger–Muller (GM) ionisation probe and the other for sodium iodide (NaI) detector with lead collimators; equations for the most general case and the geometry models for Monte Carlo simulation of both (GM and NaI) detectors are employed. Finally, an example of application is discussed.     

宏观放电参数对快原子态氮(N+,Nf)的影响

采用氮直流辉光放电等离子体中快电子和重粒子(N₂⁺,N⁺,N_f)混合的蒙特卡罗方法,模拟研究了快原子态粒子(N⁺,N_f)的产生率及轰击阴极的能量分布随宏观放电参数(P,V)的变化规律.结果表明,存在一最佳放电条件,使阴极壁处粒子(N⁺,N_f)的粒子数密度大且能量高;当电压大于800V时,轰击阴极的活性粒子(N⁺,N_f),主要由N₂⁺-N₂离解过程产生,电压小于300V时,主要由e^--N₂离解过程产生,模拟结果与实验结果相符合.     

Effect of Vacancy Defects on the Young's Modulus and Fracture Strength of Graphene: A Molecular Dynamics Study

The Young's modulus of graphene with various rectangular and circular vacancy defects is investigated by molecular dynamics simulation. By comparing with the results calculated from an effective spring model, it is demonstrated that the Young's modulus of graphene is largely correlated to the size of vacancy defects perpendicular to the stretching direction. And a linear reduction of Young's modulus with the increasing concentration of mono‐atomic‐vacancy defects (i.e., the slope of ?0.03) is also observed. The fracture behavior of graphene, including the fracture strength, crack initiation and propagation are then studied by the molecular dynamics simulation, the effective spring model, and the quantized fracture mechanics. The blunting effect of vacancy edges is demonstrated, and the characterized crack tip radius of 4.44 Å is observed.     

Solid deformation induced by the adsorption of methane and methanol under sub- and supercritical conditions

Carbonaceous materials with some degree of flexibility in their physical structure can expand or contract under the influence of the forces exerted by adsorbed molecules. To gain insight into how adsorption of non-polar and polar fluids could deform a carbon solid, we present GCMC simulations of sub- and supercritical adsorption of methane and methanol in slit-shaped pores whose walls are made of graphene layers. Our extensive simulation study shows that there is a strong correlation between solvation pressure and solid deformation, and that the expansion or contraction of the pore strongly depends on adsorbate loading, temperature and pore size.     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

Mechanical properties of twist grain boundaries in Cu

In a previous paper we studied the Young's and shear modulus of a high-angle twist grain boundary (5) in Cu, using the EAM, and related it to the uniaxial strain derivatives of single crystals. In this paper, we discuss elastic properties of ten additional twist grain boundaries, from 8.8–43.6°. The monolayer Young's modulus at each boundary was calculated and found to be 20–50% higher than the bulk value for all eleven boundaries for both csl and type1 structures. The monolayer shear modulus at each boundary was calculated and found to be 93–98% lower than the bulk value for six grain boundaries with csl structure and found to decrease with increasing twist angle. The critical shear stress was also calculated for eleven boundaries with csl structure and found to roughly decrease with increasing twist angle.     

Simulating Multivariate Extreme Value Distributions of Logistic Type

Methods are given for simulating from symmetric and asymmetric versions of the multivariate logistic distribution, and from other multivariate extreme value distributions based on the well known logistic model. We consider two general approaches. The first approach uses transformations to derive random variables with a joint distribution function from which it is easy to simulate. The second approach derives from a specification of conditionally independent marginal components, conditioning on positive stable random variables. This specification extends to models of nested or hierarchical type and leads to an efficient way of incorporating marginal censoring. The algorithms presented in Sections 2 and 3 are available on request from the author. They are also included in the R (Ihaka and Gentleman, 1996) package evd (Stephenson, 2002), which is available from http://www.maths.lancs.ac.uk/~stephena/.     

Evaluating Individual Market Power in Electricity Markets via Agent-Based Simulation

We use agent-based simulation in a coordination game to analyse the possibility of market power abuse in a competitive electricity market. The context of this was a real application to the England and Wales electricity market as part of a Competition Commission Inquiry into whether two particular generators could profitably influence wholesale prices. The research contributions of this paper are both in the areas of market power and market design policy issues for electricity markets, and in the methodological use of large industry-wide evolutionary simulation models.