金溶液pH值及浸泡处理对Au/Al2O3催化剂上CO氧化反应活性的影响

 采用阴离子浸渍法制备了Au/Al2O3催化剂,考察了溶液pH值及浸泡处理对催化剂上CO氧化反应的影响. 结果表明,催化剂的活性随着浸渍液氯金酸溶液pH值的升高而升高. 对于经300 ℃下H2还原处理的Au/Al2O3催化剂,无论用水浸泡还是用氨水浸泡,室温下CO转化率均可达到100%, 且催化剂具有良好的稳定性. 用氨水浸泡的催化剂经氧化处理后依然保持高活性,但用水浸泡的催化剂活性大幅度下降. XPS结果表明,用氨水浸泡的Au/Al2O3催化剂表面含有Al, O, C, N, Na和Au原子,但没有Cl原子存在. 这说明用氨水浸泡催化剂可有效除去Cl-离子而提高其催化活性.     

Gas-phase reactivity of metavanadate [VO3]- towards methanol and ethanol: experiment and theory

The gas-phase reactivity of the metavanadate anion [VO3]- towards methanol and ethanol was examined by a combination of ion-molecule reaction and isotope labelling experiments in a quadrupole ion-trap mass spectrometer. The experimental data were interpreted with the aid of density functional theory calculations. [VO3]- dehydrated methanol to eliminate water and form [VO2(eta2-OCH2)]-, which features an [eta2-C,O-OCH2]2- ligand formed by formal removal of two protons from methanol and which is isoelectronic with peroxide. [VO3]- reacted with ethanol in an analogous manner to form [VO2(eta2-OCHCH3)]-, as well as by loss of ethene to form [VO2(OH)2]-. The calculations predicted that important intermediates in these reactions were the hydroxo alkoxo anions [VO2(OH)(OCH2R)]- (R: H, CH3). These were predicted to undergo intramolecular hydrogen-atom transfer to form [VO(OH)2(eta1-OCHR)]- followed by eta1-O-->eta2-C,O rearrangements to form [VO(OH)2(eta2-OCHR)]-. The latter reacted further to eliminate water and generate the product [VO2(eta2-OCHR)]-. This major product observed for [VO3]- is markedly different from that observed previously for [NbO3]- containing the heavier Group 5 congener niobium. In that case, the major product of the reaction was an ion of stoichiometry [Nb, O3, H2]- arising from the formal dehydrogenation of methanol to formaldehyde. The origin of this difference was examined theoretically and attributed to the intermediate alkoxo anion [NbO2(OH)(OCH3)]- preferring hydride transfer to form [HNbO2(OH)]- with loss of formaldehyde. This contrasts with the hydrogen-atom-transfer pathway observed for [VO2(OH)(OCH3)]-.     

Biomimetic hydrocarbon oxidation catalyzed by nonheme iron(III) complexes with peracids: evidence for an Fe(V)=O species

Mononuclear nonheme iron(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Fe(Me(2)bpb)Cl(H(2)O)] (3 a) and [Fe(bpc)Cl(H(2)O)] (4 a), were prepared by substitution reactions involving the previously synthesized iron(III) complexes [Et(3)NH][Fe(Me(2)bpb)Cl(2)] (3) and [Et(3)NH][Fe(bpc)Cl(2)] (4). Complexes 3 a and 4 a were characterized by IR and elemental analysis, and complex 3 a also by X-ray crystallography. Nonheme iron(III) complexes 3, 3 a, 4, and 4 a catalyze olefin epoxidation and alcohol oxidation on treatment with m-chloroperbenzoic acid. Pairwise comparisons of the reactivity of these complexes revealed that the nature of the axial ligand (Cl(-) versus H(2)O) influences the yield of oxidation products, whereas an electronic change in the supporting chelate ligand has little effect. Hydrocarbon oxidation by these catalysts was proposed to involve an iron(V) oxo species which is formed on heterolytic O-O bond cleavage of an iron acylperoxo intermediate (FeOOC(O)R). Evidence for this iron(V) oxo species was derived from KIE (k(H)/k(D)) values, H(2) (18)O exchange experiments, and the use of peroxyphenylacetic acid (PPAA) as the peracid. Our results suggest that an Fe(V)=O moiety can form in a system wherein the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors. This work is relevant to the chemistry of mononuclear nonheme iron enzymes that are proposed to oxidize organic substrates via reaction pathways involving high-valent iron oxo species.     

Bis[bis-(4-alkoxyphenyl)amino] derivatives of dithienylethene, bithiophene, dithienothiophene and dithienopyrrole: palladium-catalysed synthesis and highly delocalised radical cations

Five diamines with thiophene-based bridges--(E)-1,2-bis{5-[bis(4-butoxyphenyl)amino]-2-thienyl}ethylene (1), 5,5'-bis[bis(4-methoxyphenyl)amino]-2,2'-bithiophene (2), 2,6-bis[bis(4-butoxyphenyl)amino]dithieno[3,2-b:2',3'-d]thiophene (3), N-(4-tert-butylphenyl)-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 a) and N-tert-butyl-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 b)--have been synthesised. The syntheses make use of the palladium(0)-catalysed coupling of brominated thiophene species with diarylamines, in some cases accelerated by microwave irradiation. The molecules all undergo facile oxidation, 4 b being the most readily oxidised at about -0.4 V versus ferrocenium/ferrocene, and solutions of the corresponding radical cations were generated by addition of tris(4-bromophenyl)aminium hexachloroantimonate to the neutral species. The near-IR spectra of the radical cations show absorptions characteristic of symmetrical delocalised species (that is, class III mixed-valence species); analysis of these absorptions in the framework of Hush theory indicates strong coupling between the two amine redox centres, stronger than that observed in species with phenylene-based bridging groups of comparable length. The strong coupling can be attributed to high-lying orbitals of the thiophene-based bridging units. ESR spectroscopy indicates that the coupling constant to the amino nitrogen atoms is somewhat reduced relative to that in a stilbene-bridged analogue. The neutral species and the corresponding radical cations have been studied with the aid of density functional theory and time-dependent density functional theory. The DFT-calculated ESR parameters are in good agreement with experiment, while calculated spin densities suggest increased bridge character to the oxidation in these species relative to that in comparable species with phenylene-based bridges.     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Preferential Oxidation of CO in Excess Hydrogen over CuO-CeO2 Catalyst Prepared by Chelating Method

The CuO-CeO2 catalyst prepared by chelating method has a superior catalytic performance for the preferential oxidation of CO in rich hydrogen, compared with the CuO-CeO2 catalyst prepared by coprecipitation method. The CO conversions over these catalysts, at 120℃and 120000 ml/(g-h) in the absence of CO2 and H2O, are 99.6% and 88.6%, respectively, and the selectivity of O2 over these catalysts is very close (i.e. 51.3% and 55.8%, respectively). The influence of certain factors such as hydrogen concentration, carbon monoxide concentration, H2O, O2/CO ratios, and space velocity on the catalytic performance of CuO-CeO2 catalyst prepared by chelating method is also studied. The results show that the addition of hydrogen and H2O has a negative effect on the catalytic performance of CuO-CeO2 catalyst, however, the variation of space velocity and the O2/CO ratio causes a comparatively slight influence.     

Effect of Addition of Base on Ceria and Reactivity of CuO/CeO2 Catalysts for Low-Temperature CO Oxidation

In this work, we have reported the influence of the addition of base (KOH) on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and temperature-programmed reduction by H2 (H2-TPR). The catalytic properties of the CuO/CeO2 catalysts for low-temperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.     

The Effect of Nb Loading on Catalytic Properties of Ni/Ce0.75Zr0.25O2 Catalyst for Methane Partial Oxidation

In this study,the effect of Nb loading on the catalytic activity of Ce_(0.75)Zr_(0.25)O_2-supported Ni catalysts was studied for methane partial oxidation.The catalysts were characterized by BET,H_2 chemisorption,XRD,TPR,TEM and tested for methane partial oxidation to syngas in the temperature range of 400-800℃at atmospheric pressure.The results showed that the activity of methane partial oxidation on the catalysts was apparently dependent on Nb loading.It seemed that the addition of Nb lowered the catalytic activity for methane partial oxidation and increased the extent of carbon deposition. This might be due to the strong interaction between NiO and Nb-modified support and reduction of surface oxygen reducibility.