类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

Theoretical study of cyclization of 2′-hydroxychalcone

The isomerization mechanism of 2′(OH)chalcone (1) in flavanone (2) was studied. The calculations were performed with the semiempirical method AM1, using totally optimized molecular geometries. A 6-step mechanism including several equilibrium states was proposed. It was concluded that: (a) At the conformational equilibrium of 1 there could be 43.9% of s-cis conformer; (b) The acid dissociation of 1 trans-s-trans is considerable; (c) The E_E, ΔH_f and net charges show that the rotation of ring A of 1 and the formation of ring C of 2 occurs without greater impairments; (d) Although the keto structure is the most stable one, the enolate of 2 is present in the reaction medium; (e) The conversion of enol of 2 in the keto form would be the limiting step of the analyzed isomerization rate.     

元素在石墨炉内石墨探针表面上的原子化机理研究：Ⅶ.锗的原子化机理

本文应用Ｘ－射线衍射，Ｘ－射线光电子能谱，俄歇电子能谱和其它一些实验，考察石墨炉升温过程中氟化锗，锗酸钠在石墨探针表面上的形态变化，阐明了它们的原子化机理：ＧｅＦ２与Ｎａ２ＧｅＯ３首先分解为ＧｅＯ２，ＧｅＯ２还原为ＧｅＯ，后者在＞２４００Ｋ热分解产生自由态的锗原子，ＧｅＦ２和Ｎａ２ＧｅＯ３的原子化均源于ＧｅＯ（ｇ）的气相分解。原子化的升温过程中，在１４００－２４００Ｋ ＧｅＦ２和Ｎａ２ＧｅＯ３都产     

On the exact distribution of linear combinations of order statistics from dependent random variables

We study the exact distribution of linear combinations of order statistics of arbitrary (absolutely continuous) dependent random variables. In particular, we examine the case where the random variables have a joint elliptically contoured distribution and the case where the random variables are exchangeable. We investigate also the particular L-statistics that simply yield a set of order statistics, and study their joint distribution. We present the application of our results to genetic selection problems, design of cellular phone receivers, and visual acuity. We give illustrative examples based on the multivariate normal and multivariate Student t distributions.     

A computational study into the reactivity of epichlorohydrin and epibromohydrin under basic conditions in the gas phase and solution

Ab initio molecular orbital calculations were carried out on epibromohydrin (EBH) and epichlorohydrin (ECH) in an attempt to elucidate their reactivity with respect to a hard nucleophile, hydroxide. These systems were modeled in both the gas phase and a polar solvent under basic conditions. In the gas phase, it was determined that a direct displacement mechanism (nucleophilic attack at the C1 position) was operative for EBH, while an indirect pathway (nucleophilic attack at the C3 position and subsequent intramolecular displacement) was followed for ECH. In an acetone solution, only the indirect displacement mechanism was found to occur. An electrostatic argument is advanced to account for this behavior in polar solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Dynamic supercoiling bifurcations of growing elastic filaments

Certain bacteria form filamentous colonies when the cells fail to separate after dividing. In Bacillus subtilis, Bacillus thermus, and Cyanobacteria, the filaments can wrap into complex supercoiled structures as the cells grow. The structures may be solenoids or plectonemes, with or without branches in the latter case. Any microscopic theory of these morphological instabilities must address the nature of pattern selection in the presence of growth, for growth renders the problem nonautonomous and the bifurcations dynamic. To gain insight into these phenomena, we formulate a general theory for growing elastic filaments with bending and twisting resistance in a viscous medium, and study an illustrative model problem: a growing filament with preferred twist, closed into a loop. Growth depletes the twist, inducing a twist strain. The closure of the loop prevents the filament from unwinding back to the preferred twist; instead, twist relaxation is accomplished by the formation of supercoils. Growth also produces viscous stresses on the filament which even in the absence of twist produce buckling instabilities. Our linear stability analysis and numerical studies reveal two dynamic regimes. For small intrinsic twist the instability is akin to Euler buckling, leading to solenoidal structures, while for large twist it is like the classic writhing of a twisted filament, producing plectonemic windings. This model may apply to situations in which supercoils form only, or more readily, when axial rotation of filaments is blocked. Applications to specific biological systems are proposed.     

Mechanism of the reaction of neutral and anionic N-nucleophiles with α-halocarbonyl compounds

N-Acylalkylation of neutral and anionic N-nucleophiles with α-halocarbonyl compounds was investigated by quantum chemical methods in terms of the density functional theory and by experimental methods for 2,3-dihydroimidazo[2,1-b]quinazolin-1(10)H-5-one, its N-anion, and simpler model structures. High reactivity of these reagents is determined primarily by stabilization of transition states (TS) by bridge bonds involving halogen or nitrogen atoms rather than by conjugation, as has been commonly accepted. Bridged TS are formed by both the substitution mechanism S _N 2 and the addition-elimination mechanism. α-Haloalkyl-substituted zwitterions, which are potential intermediates of stepwise N-acylalkylation of neutral N-nucleophiles, do not exist in the isolated state, but they are rather efficiently stabilized upon solvation. These zwitterions, as well as analogous O-anions generated from anionic N-nucleophiles, can serve as intermediates of N-acylalkylation, as was demonstrated by localization of the corresponding TS. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1150–1164, June, 2007.     

A photoemission study of molybdenum hexacarbonyl adsorption and decomposition on TiO2(1 1 0) surface

The adsorption and decomposition of molybdenum hexacarbonyl on (1 1 0) TiO₂ surfaces were studied using both core levels and valence band photoemission spectroscopies. It was found that after an adsorption at 140 K, when going back to room temperature, only a small part of molybdenum compounds, previously present at low temperature, remained on the TiO₂ surface. This indicates that the desorption temperature on such a surface is lower than the decomposition one. The use of photon irradiation to decompose the hexacarbonyl molecule was also studied. It was shown that during such a decomposition molecular fragments were chemisorbed on the surface allowing a higher amount of metal to remain on the surface. It was also shown that it was possible to get rid of adsorbed subcarbonyl groups and to organize the metal atoms by thermal treatments at temperatures as low as 400 K, i.e. much lower than the one needed to obtain the same structures using physical vapour deposition (PVD). Moreover, due to lower used temperatures, this chemical way of deposition allows a better control of the interface than during PVD growth.     

Small-world and the growing properties of the Chinese railway network

By using the tools of statistical physics and recent investigations of the scaling properties of different complex networks, the structural and evolving properties of the Chinese railway network (CRN) is studied. It has been verified that the CRN has the same small-world properties of the Indian railway network (IRN). According to the class of small-world networks, we believe the CRN is a single scale. In addition, a novel result is obtained. Measurements on the CRN indicate that the rate at which nodes acquire links depends on the node’s degree and follows a power law.      

Growth kinetics of iron boride layers: Dimensional analysis

Dimensional analysis is presented as a powerful tool in the study of the paste boriding process. In particular, a dimensional method is used to study the growth kinetics of the boride layers FeB and Fe₂B. Experiments were performed in AISI 1045 steel and AISI M2 steel, to test the suggested model. Samples of 1045 steel were prepared and treated using boron paste thickness of 3-5 mm, at temperatures of 1193, 1223 and 1273 K, with 2, 4 and 6 h of treatment time. The M2 specimens had boron paste thickness of 3 and 4 mm and temperatures of 1223, 1253 and 1273 K for 2 and 6 h. Results indicate that the growth of boron layers obeys power laws of the form y = αx^β, where α and β constants are a function of the material and the interface of interest. Validation of the model was carried out using experimental data with an average error percentage of 7.6% for Fe₂B in 1045 steel, 15.8% for FeB and 3.4% for Fe₂B in M2 steel.