Heat Capacities of Aqueous Solutions of Acetone; 2,5-Hexanedione; Diethyl Ether; 1,2-Dimethoxyethane; Benzyl Alcohol; and Cyclohexanol at Temperatures to 523 K

The heat capacities of aqueous solutions of acetone, 2,5-hexanedione, diethyl ether, 1,2-dimethoxyethane, benzyl alcohol and cyclohexanol at concentrations of 0.1 to 1.0 mol⋅kg⁻¹ were determined at temperatures of 298.15, 423.15, 473.15 and 523.15 K and pressures up to 28 MPa. The measurements were performed at ambient conditions using the commercial Picker differential flow calorimeter and at high temperatures and pressures with a customized Picker type calorimeter constructed at the Blaise Pascal University, Clermont-Ferrand. Standard molar heat capacities were obtained by weighted extrapolation to the infinite dilution limit. The contributions of –CO–, –O– and –OH groups to the standard molar volume and standard molar heat capacity were determined from the newly determined and literature data. The variation of the three oxygen-containing group contributions with temperature and molecular structure is examined qualitatively.     

A group additivity approach for the estimation of heat capacities of organic liquids and solids at 298 K

A group additivity method is described which provides heat capacity estimates of the condensed phase. The data base consists of 810 liquids and 446 solids. Group values for carbon in various common substitution and hybridization states and for 47 functional groups are provided. The standard error of estimation using this approach on this data base is 19.5 (liquids) and 26.9 J/ (mole K) (solids). This can be compared to typical experimental uncertainties of 8.12 and 23,4 J/ (mole K) associated with these measurements, respectively. Experimental uncertainties were estimated from the numerical differences obtained for a given substance from multiple independent literature reports.     

Optical resolution of new quinolone drugs by capillary electrophoresis with ligand-exchange and host-guest interactions

A method for the optical resolution of new quinolone drugs (NQs) by capillary electrophoresis has been investigated. The NQs were adequately resolved using a γ-cyclodextrin (γ-CD)-Zn(II)- -phenylalanine ( -Phe) solution as the running solution. The resolution depended on the components of the running solution and their concentrations. When -Phe was used instead of -Phe, inversion of the migration order of the enantiomers was observed. The resolution mechanism is considered to be due to a ligand-exchange interaction of the NQs with Zn(II) and -Phe, in combination with a host-guest interaction of those with γ-CD.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Kristallstruktur und Pseudosymmetrie einer neuen Modifikation von Kaliumhexachloroniobat(V), KNbCl6. Anmerkungen zur kubischen Phase

Crystal Structure and Pseudosymmetry of a New Modification of Potassium Hexachloroniobate(V), KNbCl₆. Comments on the Cubic Phase Long needles of KNbCl₆ – invariably twinned around [100] – are obtained if the material is crystallized from SOCl₂ solution. The structure has been determined from X-ray data collected with a single-crystal diffractometer at room temperature [space group P2₁/n, Z = 16, a = 6.894(1), b = 22.073(4), c = 23.337(3) Å, β = 91.00(1)°, R = 0.032 for 2 909 unique reflexions, 290 structural parameters]. Distorted NbCl₆^? octahedra and ?interstitial’? K⁺ ions are found to form similar arrangements, each of them corresponding to a closest packing of spheres with the layer sequence ACAB (stacking symbol hc). The resulting asymmetry in coordination by potassium is coupled with a strong off-centre displacement of the Nb atoms in any of the four independent chlorine polyhedra (0.14 Å on average). A pronounced pseudosymmetry accounts for the twinning. Since P2₁/m2₁/n2₁/b (no. 62) is already a good approximation of the real structure, only one formal step of symmetry reduction (index t2) is needed to create both, the observed twin law and the actual space group P1 2₁/n1. Above 180°C a reconstructive phase transition leads to the ‘face-centred cubic’ modification with ～ 10% lower density.     

Reactions of fluorinated acid anhydrides, (CF3CO)2O, (CF3SO2)2O and (FSO2)2O, with organometallic substrates of group 15 (As, Sb and Bi)

(C₆H₅)₃MX₂ (M = As, Sb; X = OCOCF₃ and M = Sb, Bi; X = SO₃F, SO₃CF₃) compounds prepared by the interaction of triphenylmetal(V) substrates with (CF₃CO)₂O, (CF₃SO₂)₂O and (FSO₂)₂O have been characterized by molecular weight determination, elemental and spectroscopic (IR, ¹H and ¹⁹F NMR, mass) analyses.     

HEMA-NVP-St三元共聚体系研究Ⅲ.均化剂对共聚物组成均一性的影响

用溴化钾-溴酸钾滴定法测定双键含量,元素分析法测定共聚物组成。讨论了HEMA-NVP-St三元共聚体系在不同反应程度时共聚物组成的变化,以及在此三元共聚体系中引入均化剂后,少量均化剂对共聚体系组成均一性的影响。发现在HEMA-NVP-St三元共聚体系中加入均化剂,对共聚反应的反应动力学影响不大,但对共聚物的组成均一性有较大影响。它的加入使三元共聚物中的链节比分布(即不同反应程度时,产物的累积平均组成)向较均一的方向发展。结合红外光谱、电子显微镜等实验证据,从微观结构上探讨了约化剂的作用。阐明均化剂改善了反应体系的相容性,从而得到组成分布较为均一的共聚产物。     

Optimization of tetramethoxysilane-derived sol gel entrapment protocol stabilizes highly active chlorophyllase

Entrapment of membrane proteins is a challenging task compared to that involving soluble proteins. Chlorophyllase, a membrane protein, was successfully entrapped in tetramethoxysilane-derived sol-gel. Pre-gel sol typically consists of an aqueous suspension of chlorophyllase, precursors including tetramethoxysilane and/or methytrimethoxysilane, and sodium fluoride as catalyst. To obtain a highly active entrapped enzyme preparation, the effects of various immobilization parameters, including the chemical compositions of pre-gel sol (water/silane ratio, precursor type and proportions, enzyme loading, sodium fluoride concentration), and sol-gel process parameters (aging and drying time and approach) have been investigated. Chlorophyllase demonstrated the highest activity in gel derived from a pre-gel sol with water/silane ratio of 30 and enzyme loading of 0.257 mg_protein/g_gel, and showed moderately lower activity in organically modified sol-gel than that in hydrophilic sol-gel. The effects of water/silane ratio and precursor combinations on the activity of entrapped chlorophyllase were also studied by examining the pore morphology of gel via nitrogen adsorption-desorption. Longer aging time leads to an entrapped chlorophyllase preparation with higher activity. Chlorophyllase preparation demonstrated negligible activity after air-drying for 12 h while lyophilized chlorophyllase preparation demonstrated 8, 4 and 4 times higher activity than air-dried, vacuum-dried and solvent-dried preparations. Chlorophyllase demonstrated 30% higher activity in the improved sol-gel protocol than that from a non-optimized sol-gel protocol developed in a previous study.     

Model prediction of batch emulsion copolymerization as a function of conversion: A sensitivity analysis

Recently a model has been developed capable of predicting absolute monomer concentrations and their ratios in the polymer, aqueous, and monomer droplet phases as a function of conversion in batch emulsion copolymerizations without using any adjustable parameters. In this article the sensitivity of model predictions of composition drift toward deviations of 10% in all model parameters (maximum swellabilities of monomer in the polymer phase, water solubilities, reactivity ratios, and monomer and polymer densities) was estimated using the monomer combination methyl methacrylate-styrene as an example. From the sensitivity analysis it can be concluded that the reactivity ratios are the most important parameters affecting composition drift. The effects of deviations in maximum swellabilities and monomer and polymer densities on composition drift can be neglected, while the water solubility is important only in those cases where the amount of monomer in the aqueous phase cannot be neglected as compared with the total monomer amount. © 1994 John Wiley & Sons, Inc.     

Fluorescence decay of tertiary aliphatic amines

The fluorescence decay of the tertiary aliphatic animes trimethylamine (TMA), triethylamine (TEA) and tri-n-propylamine (TPA) in the vapour phase excited between 260 and 215 nm has been shown to consist of a single, wavelength-dependent, component when the first excited state is uniquely excited, but two components when the first and second excited states are simultaneously excited. This dual exponentiality persists at pressures as low as 10 mTorr, and it is argued that the two-component decay does not arise from collisional vibrational relaxation.