Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition,structure, properties

Lignocellulosic fibers extracted from sugarcane bagasse were treated with NaOH solutions of different concentration (0-40 wt%) to study the effect of alkali treatment on the composition, structure and properties of the fibers. Composition was determined by the van Soest method, structure was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), while mechanical properties by tensile testing. Hemicellulose and lignin content decrease, while cellulose content goes through a maximum as a function of alkali concentration. Crystallinity changes only slightly and microfibril angle (MFA) remains constant thus structural effects and especially MFA are not the primary reasons for changing properties. The Young's modulus of the fibers shows a slight maximum at around 2-4 wt% NaOH content, while tensile strength goes through a much more pronounced one at around 5-8 wt%. Direct correlation between structure and mechanical properties was not found indicating that composition is more important in the determination of properties than structure. Regression analysis proved that the combination of several compositional variables determines mechanical properties in a non-linear manner. The improvement in fiber properties was explained with the dissolution of weak amorphous fractions and the relative increase of cellulose content.     

Structures and Stability of Complexes of E(C6F5)3 (E = B,Al, Ga,In) with Acetonitrile

Complexes formed by interaction of E(C₆F₅)₃ (E = B, Al, Ga, In) with excess of acetonitrile (AN) were structurally characterized. Quantum chemical computations indicate that for Al(C₆F₅)₃ and In(C₆F₅)₃ the formation of a complex of 1:2 composition is more advantageous than for B(C₆F₅)₃ and Ga(C₆F₅)₃, in line with experimental observations. Formation of the solvate [Al(C₆F₅)₃ · 2AN] · AN is in agreement with predicted thermodynamic instability of [Al(C₆F₅)₃ · 3AN]. Tensimetry study of B(C₆F₅)₃ · CH₃CN reveals its stability in the solid state up to 197 °C. With the temperature increase, the complex undergoes irreversible thermal decomposition with pentafluorobenzene formation.     

大气颗粒物中棕色碳的化学组成、来源和生成机制

大气颗粒物中棕色碳(BrC)在近紫外波段具有强吸光性,并因其显著的气候效应被广泛关注。BrC组成、来源、演变和光学性质的不确定性是造成气候模型估算气溶胶辐射强迫不确定性的重要因素。本文综述了大气颗粒物中BrC的化学组成、来源和生成机制,聚焦分子水平上BrC组成、二次生成机制和吸光间的关联。大气颗粒物中BrC的主要类别包括有机溶剂(甲醇)提取的碳质组分、水溶性有机碳及类腐殖质; 分子水平上,硝基芳香烃和含氮杂环有机物是BrC的主要发色团。BrC的来源包括生物质等不完全燃烧一次排放和挥发性有机物氧化二次生成; 二次生成途径主要包括人为源芳香烃氧化生成硝基芳香烃等含氮组分、羰基化合物与铵/胺反应生成含氮杂环组分或低聚物。前体物和反应条件影响二次生成BrC的组成和吸光性质; BrC在大气传输过程中还会发生“光漂白”现象。在分子水平上识别和阐明BrC的发色团、二次生成机制及其演变过程是未来该领域的重点研究方向。     

Improving Vesicular Integrity and Antioxidant Activity of Novel Mixed Soy Lecithin-Based Liposomes Containing Squalene and Their Stability against UV Light

In order to improve the membrane lipophilicity and the affinity towards the environment of lipid bilayers, squalene (SQ) could be conjugated to phospholipids in the formation of liposomes. The effect of membrane composition and concentrations on the degradation of liposomes prepared via the extrusion method was investigated. Liposomes were prepared using a mixture of SQ, cholesterol (CH) and Tween80 (TW80). Based on the optimal conditions, liposome batches were prepared in the absence and presence of SQ. Their physicochemical and stability behavior were evaluated as a function of liposome constituent. From the optimization study, the liposomal formulation containing 5% (w/w) mixed soy lecithin (ML), 0.5% (w/w) SQ, 0.3% (w/w) CH and 0.75% (w/w) TW80 had optimal physicochemical properties and displayed a unilamellar structure. Liposome prepared using the optimal formulation had a low particle size (158.31 ± 2.96 nm) and acceptable %increase in the particle size (15.09% ± 3.76%) and %trolox equivalent antioxidant capacity (%TEAC) loss (35.69% ± 0.72%) against UV light treatment (280–320 nm) for 6 h. The interesting outcome of this research was the association of naturally occurring substance SQ for size reduction without the extra input of energy or mechanical procedures, and improvement of vesicle stability and antioxidant activity of ML-based liposome. This study also demonstrated that the presence of SQ in the membrane might increase the acyl chain dynamics and decrease the viscosity of the dispersion, thereby limiting long-term stability of the liposome.     

Heinz Gerrens Revisited: A New Look at the Impact of Reactor Type on Polymer Chain Morphology

The equations for predicting molecular weight distribution, copolymer composition distribution, and copolymer sequence distribution for three polymerization mechanisms (monomer linkage with termination, monomer linkage without termination, and polymer linkage), and three reactor types (batch/plug flow, homogenous continuous stirred tank, and segregated continuous stirred tank) are assembled from various sources and compared and contrasted.     

Electrodeposition and characterization Zn-Co alloy

The present work details optimization of a stable acid chloride bath for electroplating of bright Zn-Co alloy on mild steel using gelatin and glycine as additives. It was found that the addition of gelatin along with glycine changed the deposition pattern markedly. A suitable bath has been formulated using conventional Hull cell experiments. The bath under plating conditions were found to exhibit anomalous codeposition with preferential deposition of less noble (zinc) over more noble (cobalt) as characterized by Zn-Fe group metal alloys. Investigation revealed that the current density (c.d.), temperature, and pH of the bath have strong effect on the composition of the deposit. Influence of bath constituents and operating parameters on appearance and composition of deposits were studied as measure of their performance against corrosion. A variety of deposits were obtained and their corrosion resistances were measured by Tafel method with/without chrome passivation. Experimental results demonstrated the fact that the corrosion resistances of Zn-Co alloys increased with percent of Co in the deposit except at very high c.d. This is due to the fact at very high c.d. the deposit becomes very porous and thick as evidenced by SEM image. The formation of Zn-Co alloy is confirmed by EDAX analysis. A stable chloride bath for Zn-Co alloy deposition has been proposed and discussed. The formation of passive film on chromatization is indicated by almost same E _corr value of all Zn-Co electroplates irrespective of the current densities at which they have been deposited. Published in Russian in Elektrokhimiya, 2009, Vol. 45, No. 7, pp. 811–816. The text is published in the original.     

Seasonal Variability of a Caryophyllane Chemotype Essential Oil of Eugenia patrisii Vahl Occurring in the Brazilian Amazon

Eugenia patrisii Vahl is a native and non-endemic myrtaceous species of the Brazilian Amazon. Due to few botanical and phytochemical reports of this species, the objective of the present work was to evaluate the seasonal variability of their leaf essential oils, performed by GC and GC-MS and chemometric analysis. The results indicated that the variation in oil yields (0.7 ± 0.1%) could be correlated with climatic conditions and rainy (R) and dry seasons (D). (E)-caryophyllene (R = 17.1% ± 16.0, D = 20.2% ± 17.7) and caryophyllene oxide (R = 30.1% ± 18.4, D = 14.1% ± 19.3) are the major constituents and did not display significant differences between the two seasons. However, statistically, a potential correlation between the main constituents of E. patrisii essential oil and the climatic parameters is possible. It was observed that the higher temperature and insolation rates and the lower humidity rate, which are characteristics of the dry season, lead to an increase in the (E)-caryophyllene contents, while lower temperature and insolation and higher humidity, which occur in the rainy season, lead to an increase in the caryophyllene oxide content. The knowledge of variations in the E. patrisii essential oil composition could help choose the best plant chemical profile for medicinal purposes.     

聚铝碳硅烷纤维预氧化过程组成结构演变的研究

采用热重-差热分析、元素分析、扫描电子显微镜、凝胶渗透色谱、红外光谱和核磁共振等手段, 研究了聚铝碳硅烷(PACS)纤维预氧化过程中组成、结构演变的规律和反应机理. 结果表明, 空气中PACS纤维从210 ℃左右开始与氧发生放热反应; 随着预氧化温度的升高, 纤维的氧含量逐渐增加, 凝胶含量在氧增重为6～8 wt%时急剧增加, 纤维表面出现细小的微裂纹. 预氧化初期, 主要是Si—H键与氧的反应, 生成Si—O—Si键, 纤维的数均分子量急剧增加, 形成交联结构; 预氧化中期, Si—H键继续反应, Si—O—Si结构明显增多, 同时Si—CH₃和Si—H与氧反应, 生成少量的Si—O—C结构; 预氧化后期, 纤维完全交联, 纤维中存在SiC₄, SiC₃H, Si—O—Si和少量的Si—O—C结构.     

Nondestructive in‐depth composition profile of oxy‐hydroxide nanolayers on iron surfaces from ARXPS measurement

In this work the maximum entropy method (MEM) is applied, for the first time, to angle‐resolved X‐ray photoelectron spectroscopy (ARXPS) data from oxy‐hydroxide films on iron surfaces. This nondestructively derives information on the in‐depth distribution of the composition and chemical state. An MEM algorithm was created and first tested on the simulated data. The reconstructed composition depth profiles agreed very well with the theoretical ones up to 5% Gaussian noise added to the data. The same algorithm was then applied to ARXPS data from iron samples to investigate the in‐depth variations in the composition and chemical state of the nanosized oxy‐hydroxide film naturally grown on the iron surface. The resulting surface film presents a complex multilayer structure with concentration gradients. The effect of air exposure on the structure was also investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

葡萄糖、果糖和蔗糖在甲酰胺溶液中的体积性质

报导了含葡萄糖、果糖和蔗糖的甲酰胺溶液的密度数据，无限稀释表观摩尔体积和体积第二维里系数．利用改进的定标粒子理论、基团几何模型和基团加合方法，求解了溶质的空腔生成体积，溶质-溶剂间的氢键作用对体积性质的影响，并和水溶液中的情况进行了比较．