Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.     

Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

Molecular volume calculation using AM1 semi-empirical method toward diffusion coefficients and electrophoretic mobility estimates in aqueous solution

Diffusion coefficients and electrophoretic mobility are two important physicochemical parameters used in mass transport phenomenon studies. The volume of the solute is required to determine or estimate these parameters. Classical methods, such as the LeBas method are commonly used. However, although valid, this method may represent a boring and time-consuming task, depending on the nature and number of compounds to be calculated. In this study, the volumes of a series of neutral and charged substances of the main functional groups present in organic molecules, amino acids, drugs and diverse compounds, such as cytosine and glucose, were calculated according to the LeBas method (V_M) and the AM1 semi-empirical method, V_W(AM1). The latter showed to be statistically coincident with the former. Employed as a pure value or corrected by the LeBas molar volume, the AM1 molecular volume was also demonstrated to estimate the diffusion coefficients in infinite aqueous dilution within an acceptable average error, according to the Othmer–Thakar, Wilke–Chang and Hayduk–Laudie methods, as well as the electrophoretic mobility of charged substances, such as carboxylates and protonated amines. According to these results, the AM1 method was seen to be statistically valid to calculate molecular volume. Many advantages in the construction of most diverse structures were noted, as well as a reduction in time and an increase in the quality of the information, when run on molecular modeling software.     

Phase-fixed double-group 3-Γ symbols. IV. Real 3-Γ symbols and coupling coefficients for the group hierarchies T* ⊃ C 3 * and T* ⊃ C 2 *

We present sets of real 3- symbols which correspond to explicitly given irreducible matrix representations for the two double group hierarchies T* C ₃ ^* and T* C ₂ ^* . They fit into the formalism exposed in a previous paper [1] on the general theory of 3- symbols and coupling coefficients and illustrate much of the discussion in a subsequent one [2] treating the particular properties of the double groups.     

Phase equilibria for binary systems of octane boosters with 2,2,4-trimethylpentane

Isobaric vapor–liquid equilibrium data at 95.96 kPa for the three binary systems of 2,2,4-trimethylpentane with methyl tert-butyl ether, di-isopropyl ether and dimethoxymethane are determined. A Swietoslawski type ebulliometer is used for the measurements. The experimental T–x data are used to estimate Wilson parameters and the parameters, in turn, are used to calculate vapor phase compositions and activity coefficients. All the systems studied here do not exhibit azeotropes and behave like non-ideal solutions.     

Conduction and Transport Numbers in Metacomposites MeWO<Subscript>4</Subscript> ⋅ WO<Subscript>3</Subscript> (Me = Ca,Sr, Ba)

The conduction and transport numbers of charge carriers for composites in the systems MeWO₄-WO₃ (Me = Ca, Sr, Ba) are studied as a function of the temperature and the activity of oxygen in a gas phase. The transport numbers are determined by an emf method and are estimated from dependences of conductance on the activity of oxygen in a gas phase. The deficiencies of the given procedure as applied to investigation of properties of composite phases are analyzed. The materials under study are classified with a class of metacomposites. The concentration intervals of the ionic, mixed, and electronic conductions are determined. The conduction of composites of compositions (100 − x)MeWO₄ ⋅ xWO₃ is predominantly ionic at x ≤ 10 (Me = Ca), x ≤ 60 (Me = Sr), and x ≤ 45 (Me = Ba). The obtained data are explained in the framework of a model that represents a composite as a distributed matrix system where a film of surface phase MeW-s with a high mobility of oxygen ions plays the role of a connected matrix. It is presumed that the surface phase MeW-s possesses double-sided surface activity (α _MeW-s ≤ ) and a higher mobility with respect to MeWO₄ and WO₃. The discovered anomalies of dependences (T) and partial dependences , σ_el(T) are explained by a change in the stoichiometry, morphology, and the degree of connectedness of surface phase MeW-s caused by with a change in the temperature and composition of composites.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 680–693.Original Russian Text Copyright © 2005 by Neiman, Pestereva, Sharafutdinov, Kostikov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Ternary rare-earth nickel arsenides R3Ni7As5 (R=La, Ce, Pr, Nd, Sm) with a new variant of the BaAl4-type: crystal structure and physical properties

The ternary rare-earth nickel arsenides R₃Ni₇As₅ (R=La, Ce, Pr, Nd, Sm) were prepared by arc melting the elemental components and subsequent annealing at T=1070 K. The crystal structure of Ce₃Ni₇As₅ was determined from single-crystal X-ray data: space group Pmmn, Z=2; a=1.24210(6), b=0.40797(2), c=0.96436(5) nm, R_F=0.037 (R_w=0.044); 596 independent reflections; 53 variable parameters. It is a new structure type, which belongs to the family of BaAl₄-related structures. The magnetic properties are as follows: La₃Ni₇As₅ is a Pauli-type paramagnet above 4.2 K, Pr₃Ni₇As₅ remains paramagnetic in the temperature range investigated and Nd₃Ni₇As₅ undergoes a ferromagnetic ordering at T_C=24 K. Sm₃Ni₇As₅ orders antiferromagnetically at a Néel temperature of T_N=18 K followed by a spin flip towards parallel spin-alignment below T_C=6 K. Ce₃Ni₇As₅ reveals a strong deflection of the linear temperature dependence of the inverse susceptibility due to an intermediate valence behavior. The temperature dependence of the electrical resistivities for the La, Pr, Nd, Sm containing samples corroborates with the metallic state of the non-magnetic (La) and the magnetically ordered compounds, whereas in case of Ce₃Ni₇As₅ the resistivity seems to be determined by an interplay of Kondo scattering and crystalline field effects. L_III X-ray absorption spectra confirm the demagnetization effects owing from valence fluctuations, the actual valence thereby changes from ν=3.10-3.14 at room temperature and 10 K, respectively.     

Lower rim substituted tert-butylcalix[4]arenes. Part 8: Calix[4]arenes with dialkoxyphosphoryl functions. Synthesis and complexing properties

New compounds: 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diisopropoxyphosphorylpropoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-methoxyethoxyphosphorylpropoxy)calix[4]arene (2) were synthesized and their ionophoric properties in ion-selective membrane electrodes were studied in comparison with already described by us 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diethoxyphophorylpropoxy)calix[4]arene (3). Complexes of 1 with calcium(II), lanthanum(III), europium(III) and gadolinium(III) nitrates were prepared in direct reaction of the ligand and appropriate metal salts. They were characterized by spectral data (IR, UV/Vis, luminescence, NMR, ESI-MS) and elemental analysis. The similarity in complexing behavior of the (dialkoxyphosphoryl)propoxy-calix[4]arenes toward calcium and some lanthanides was observed.     

Enthalpies of Dilution of D-p-Hydroxyphenylglycine in Buffer Solutions at Different pH

The effect of pH on the dilution enthalpies of D-p-hydroxyphenylglycine in phosphate buffer solutions has been investigated by isothermal titration microcalorimetry at 298.15 K. The corresponding homogeneous enthalpic interaction coefficients have been calculated according to the excess enthalpy concept. The results show that the enthalpies of dilution of D-p-hydroxyphenylglycine in phosphate buffer solutions at different pH are all positive. The overall trend is that enthalpies of dilution become more positive with an increase of pH, but there is a minimum of the enthalpy of dilution at pH = 7.0. The enthalpic pair interaction coefficients, h ₂, all have negative values. The results are interpreted from the point of view of solute-solute and solute-solvent interactions involved in the solvent effects.     

Proton-ionizable crown compounds. 12. Proton-Coupled selective membrane transport of Li+ using a proton-ionizable pyridono macrocycle

The macrocycle-mediated fluxes of several alkali metal cations have been determined in a H₂O-CH₂Cl₂-H₂O liquid membrane system. Water-insoluble proton-ionizable macrocycles of the pyridono type were used. The proton-ionizable feature allows the coupling of cation transport to reverse H⁺ transport. This feature offers promise for the effective separation and/or concentration of alkali metal ions with the metal transport being driven by a pH gradient. A counter anion in the source phase is not co-transported. The desired separation of a particular metal ion involves its selective complexation with the macrocycle, subsequent extraction from the aqueous phase to the organic phase, and exchange for H⁺ at the organic phase-receiving phase interface. Factors affecting transport which were studied include ring size, source phase pH, and receiving phase pH. Lithium was transported at a rate higher than that of the other alkali metals in both single and competitive systems using a 15-crown-5 pyridono carrier.