Visible light irradiation promoted catalyst-free and solvent-free synthesis of pyrano[2,3-d]pyrimidine scaffolds at room temperature

A catalyst-free and solvent-free synthetic route for convenient one-pot synthesizing pyrano[2,3-d] pyrimidine scaffolds through Knoevenagel-Michael cyclocondensation is reported using visible light irradiation as a green promoter at room temperature based on green chemistry principles. Completing the reactions takes thoroughly less time while obtaining the products in outstanding yields. This green method includes the application of non-hazardous reaction circumstances, direct work-up without column chromatographic separation, catalyst-free, solvent-free, cost effective, simple synthesis, one-pot procedure, and high atom-economy.     

Biosynthesized CuO nano-platelets: Physical properties & enhanced thermal conductivity nanofluidics

This contribution reports for the first time, room temperature biosynthesis of p-type CuO nanoparticles carried out using Callistemon viminalis’ flower extracts as a chelating agent in a process that is entirely green. Room temperature X-ray diffraction, attenuated IR total reflection spectroscopy, X-ray photoelectron and Raman spectroscopy investigations confirmed the formation of single phase Tenorite bcc monoclinic CuO nanocrystals post annealing in air, at 500 °C. Photoluminescence spectroscopy with UV emissions at 356 nm (3.47 eV) and broad visible emissions at 418 nm, 561 nm, and 664 nm, support the formation in air, at 200 °C, of CuO nanoparticles with high surface-to-volume ratios and defects. As a direct application, the biosynthesized CuO nanoplatelet-containing powder dispersed in de-ionized water showed an enhancement of the thermal conductivity from 6% to 34% and a significant stability of the PVP stabilized CuO-water nanofluid.     

Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction

The present work demonstrated an eco-friendly and facile method for the preparation of starch/Fe₃O₄/zeolite-bionanocomposite (BNC) at moderate temperature. Zeolite and starch were used as solid support and stabilizer, respectively. The analysis of UV–vis showed the appearance of surface plasmon resonance. From PXRD analysis, the incorporation of magnetite nanoparticles (NPs) in zeolite substrate results in reducing of intensities and broadening of the zeolite peaks of BNC. The TEM analysis showed the formation of highly distributed Fe₃O₄-NPs with an average diameter and standard deviation of 9.24 ± 3.57 nm. The FESEM and EDX analyses imply that Fe₃O₄-NPs were homogeneously formed on the surface of the zeolite substrate. VSM analysis illustrated the as prepared BNC possessed magnetic behaviour with a saturation magnetization and coercivity of 1.84 emu g⁻¹ and 17.76 G, respectively. The prepared BNC showed potential applicability in energy as low-cost electrode material. The BNC was used as a non-precious catalyst for oxygen reduction reaction (ORR) in the alkaline medium. The presence of starch and zeolite promoted long term stability up to 1000 cycles and avoid the dissolution and agglomeration of iron oxide. The ORR commences at the onset potential of 0 V follows by the two successive reduction peaks at −0.48 V and −1.00 V.     

翠绿料瓶罐玻璃中微量元素的快速测定

翠绿料瓶罐玻璃颜色的深浅是由多种微量元素铁、铬、钴的浓度所决定的.在原子吸收光谱法测定这些微量元素时,要考虑基体产生的多种干扰.本法通过改进标准溶液的配制,克服了基体干扰,加快了样品的测定速度.     

油菜叶片的光谱特征与叶绿素含量之间的关系研究

叶绿素是作物生长中的重要因素,是植物营养胁迫、光合作用能力和生长状况的良好指示剂。实时、可靠的作物营养诊断是进行科学施肥管理的基础,也是实践精细农业的关键技术之一。采用便携式可见-近红外光谱仪,在室外自然光照条件下对不同氮肥水平下油菜叶片的光谱特性进行了研究,并根据作物特有的光谱特征,采用逐步回归分析方法建立了油菜叶片的叶绿素含量与红边位置和绿峰位置之间的定量分析模型。结果表明,将红边位置、绿峰位置二者作为自变量时,建立的模型效果优于采用单一的红边位置为自变量时建立的模型效果。其相关系数分别为0.863和0.848;校正标准偏差SEC分别为5.273和5.459, 说明采用红边位置和绿峰位置这两个参数更能很好地预测叶片的叶绿素含量。     

Strongly Basic Anion Exchange Resin Based on a Cross-Linked Polyacrylate for Simultaneous C.I. Acid Green 16, Zn(II), Cu(II), Ni(II) and Phenol Removal

The adsorption ability of Lewatit S5528 (S5528) resin for C.I. Acid Green 16 (AG16), heavy metals (Zn(II), Cu(II) and Ni(II)) and phenol removal from single-component aqueous solutions is presented in this study to assess its suitability for wastewater treatment. Kinetic and equilibrium studies were carried out in order to determine adsorption capacities, taking into account phase contact time, adsorbates’ initial concentration, and auxiliary presence (NaCl, Na₂SO₄, anionic (SDS) and non-ionic (Triton X100) surfactants). The pseudo-second-order kinetic model described experimental data better than pseudo-first-order or intraparticle diffusion models. The adsorption of AG16 (538 mg/g), phenol (14.5 mg/g) and Cu(II) (5.8 mg/g) followed the Langmuir isotherm equation, while the uptake of Zn(II) (0.179 mg^1−1/nL^1/n/g) and Ni(II) (0.048 mg^1−1/nL^1/n/g) was better described by the Freundlich model. The auxiliary’s presence significantly reduced AG16 removal efficiency, whereas in the case of heavy metals the changes were negligible. The column studies proved the good adsorption ability of Lewatit S5528 towards AG16 and Zn(II). The desorption was the most effective for AG16 (>90% of dye was eluted using 1 mol/L HCl + 50% v/v MeOH and 1 mol/L NaCl + 50% v/v MeOH solutions).     

上转换发光免疫试纸条扫描检测系统研究

研制了一种以上转换发光材料作为标记物的扫描检测系统,有别于传统的测量方法,可做出定量和多重分析.扫描检测系统以扫描方式逐点测量经生物反应而结合上去的UCP颗粒的含量,记录整个免疫试纸条的信息,计算出被测样品中特定生物分子的浓度.实验结果表明,该系统对兔抗鼠疫免疫球蛋白（IgG）标准样品的检测灵敏度达到百ng/mL量级,且具有变异系数小于6%的重复性,符合生物免疫测定的要求.     

有限深水域中三维频域自由面格林函数及其导数的计算方法

三维频域自由面格林函数及其偏导数的数值计算是海洋结构物水动力分析的难点.本文对有限水深格林函数及其偏导数的数值算法作出两点改进:①对原函数的级数表达式进行变形,提出适用于数值计算的形式,解决高频率情况下级数解的计算失真问题;②对Gauss-Laguerre积分法作出改进,解决高频率大水深情况下积分解的数值溢出问题.计算...     

不同晶体结构Gd2(MoO4)3:Eu3+荧光粉的合成及其发光性能研究

采用溶胶凝胶-燃烧法,柠檬酸为络合剂合成出系列Gd₂(MoO₄)₃:Eu³⁺荧光粉.利用X射线衍射(XRD)、扫描电子显微镜(SEM)和荧光光谱对样品的结构、形貌和发光性能进行了研究.XRD分析表明:稀土离子与柠檬酸为1:0.5时,800℃热处理获得单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉.单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉到正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉的转换可以通过改变稀土离子与柠檬酸摩尔比和热处理温度等合成条件实现.Gd₂(MoO₄)₃:Eu³⁺荧光粉的形貌受合成条件的影响.荧光光谱研究表明:Gd₂(MoO₄)₃:Eu³⁺荧光粉的主发射峰位于616 nm处来自于Eu³⁺的⁵D₀→⁷F₂电偶极跃迁.正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉发射强度明显高于单斜结构的荧光粉.计算⁵D₀→⁷F₂与⁵D₀→⁷F₁跃迁发射的相对强度比值表明:正交结构的Gd₂(MoO₄)₃:Eu³⁺中Eu³⁺局域环境的对称性较高。     

X7R型MLCC流延瓷膜显微结构的AFM研究

片式电容是由电介质陶瓷薄膜和内电极相互重叠而成的多层独石结构,又称多层陶瓷电容器(mul-tilayer ceram ic capacitors,简称MLCC)。具有体积小、内部电感低、绝缘电阻高及漏电流小、介质损耗低、价廉等优点,被广泛应用于各种电子整机中的振荡、耦合、滤波和旁路电路,尤其是高