钒酸铋黄色颜料的制备——推荐一个无机化学教学实验

该实验以Bi(NO_3)_3和NH_4VO_3为原料,采用液相沉淀法,制备钒酸铋黄色颜料。学生通过控制反应物初始浓度、溶液pH、温度与时间等条件制备分散性良好、颗粒细小、组成均匀的钒酸铋。实验涉及溶液配制、加热搅拌、简易回流、控温、调pH、检验、抽滤、洗涤、干燥等操作。钒酸铋是一种绿色环保的黄色颜料,且具有降解污染物的光催化性能,因此,该实验不仅对于提高学生无机制备实验能力具有很好的教学效果,还在实验教学中渗透了环保理念。     

Au@PVP核壳纳米粒子作为表面增强拉曼散射基底检测孔雀石绿

采用水热法合成了粒径均一、壳层厚度可控的Au@PVP核壳纳米粒子,利用壳层PVP分子分散纳米粒子的特性,使其形成均一、排列致密的单层结构,利用其内核金纳米粒子的等离子共振效应实现了孔雀石绿( MG)分子的表面增强拉曼检测。通过优化吸附时间与壳层厚度,在致密的、均匀的核壳纳米粒子表面增强拉曼散射(SERS)基底上实现MG分子高灵敏分析检测,检测线性范围1×10-10~1×10-5 mol/L,线性相关系数R2达到0.98,检出限可达1×10-12 mol/L。将本方法用于罗非鱼鱼肉中MG含量检测,样品未检出,样品加标回收率为70.8％~126.0％。结果表明,本方法快速准确、操作简单,可用于鱼肉中MG的快速检测。     

纳米金催化的绿色合成与清洁反应研究新进展

近年来,基于多相纳米金(Au)催化的绿色合成与清洁反应研究引起了人们的广泛关注。与传统的铂族金属催化剂相比,纳米Au催化剂在控制反应选择性、高收率获得目标产物以及实现高效简约的一锅法串联反应合成等符合"原子经济"及"步骤经济"等绿色化学理念的新反应及新过程方面展现了其独特的优势,已成为当前绿色催化领域研究的热点和前沿。主要综述了我们研究小组在纳米Au催化绿色合成领域,尤其是利用纳米Au催化高效制取含氮精细有机化合物及生物质资源高值化利用方面所取得的研究进展,介绍了各类反应的特点、优势及在合成中的应用。     

Recent advances on deoximation: From stoichiometric reaction to catalytic reaction

Recent advances on the deoximation reactions are reviewed in this review. It was shown that catalytic deoximation with molecular oxygen as the mild oxidant should be the developing trend of the reaction.     

Water-acetic acid mediated an efficient one-pot eco-friendly synthesis of novel bis-isoxazolopyrroloquinoline derivatives

An efficient, cost-effective and environmentally benign synthesis of novel tetracyclic bis-isoxazolopyrroloquinoline derivatives has been developed via one-pot four-component reaction of 4-amino-3-methyl-5-styrylisoxazoles, dimedone, aryl glyoxal monohydrates and 5-amino-3-methylisoxazole by employing water as a reaction medium and acetic acid (AcOH) as a green promoter. The advantages of this protocol are environmentally friendly, metal-free, less reaction time, operational simplicity, high yields, broad substrate scope and easy purification. Most significant of all, this method is green.     

Enhanced Property of Thin Cuprous Oxide Film Prepared through Green Synthetic Route

Thin cuprous oxide films have been prepared by chemical vapor deposition (pulsed spray evaporation-chemical vapor deposition) method without post-treatment. The synthesis ofcuprous oxide was produced by applying a water strategy effect. Then, the effect of water on the morphology, topology, structure, optical properties and surface composition of the obtained films has been comprehensively investigated. The results reveal that a pure phase of Cu₂O was obtained. The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV. This finding was mainly related to the decrease of crystallite size due to the effect of water. The topology analyses, by using atomic force microscope, also revealed that surface roughness decreases with water addition, namely more uniform covered surface. Moreover, theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu₂O thin film surface. Formation mechanism of the Cu₂O thin film was also suggested and discussed.     

Laccase-catalyzed carbon-carbon bond formation: oxidative dimerization of salicylic esters by air in aqueous solution

The laccase catalyzed oxidative dimerization of salicylic esters, a rare example of a laccase-catalyzed carbon-carbon bond formation, was studied. This reaction allows the use of air as stoichiometric oxidant and proceeds in aqueous solution. The preparative scope and the mechanism of the method, which provides a new and convenient access to functionalized biaryls under mild conditions, were investigated.     

A new dendrimer scaffold for preparing dimers or tetramers of biologically active molecules

Synthesis of a new scaffold derived from iminodipropionic acid for the preparation of peptide dimers and tetramers is described.     

FTIR study of hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide,and acetonitrile in supercritical CO_2

FTIR spectroscopy was used to study the hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide (DMSO),and acetonitrile in supercritical CO_2 at 318.15 K, and 12.5 and 16.5 MPa. The concentrations of the cosolvents range from 0—0.6 mol·L~(-1). The area percentage of absorption bands for hydrogen-bonded and nonhydrogen-bonded species was obtained from the IR spectra. The acid and the cosolvents can form hydrogen bond even when their concentrations are very low. At fixed solute concentration, the extent of hydrogenbonding increases with cosolvent concentration. At higher ethanol concentrations, it seems that one stearic acid molecule can hydrogen bond with more than one ethanol molecules simultaneously. It is seen that the strength of the hydrogen bond formed by the acid and the cosolvents is in the order: DMSO>ethanol>acetonitrile.     

Solubility of stearic acid in supercritical CO_2-acetonitrile mixtures

The solubility of stearic acid in supercritical CO2 with acetonitrile (CH3CN) cosolvent was measured at 318.15 K in the pressure range from 9.5 to 16.5 MPa, and the cosolvent concentration ranges from 0. 0 to 5.5 mol% . The solubility increases with acetonitrile concentration and pressure, and it also increases with the apparent density of CO2 d1(moles of CO2 in per liter of fluid) at higher cosolvent concentrations. At lower d1, however, the solubility of the acid at lower acetonitrile concentrations is lower than that in pure CO2 provided that d1 is fixed, which is discussed qualitatively based on the clustering of the components in the system.