光纤布拉格光栅嵌入SMS光纤结构的湿度传感器

提出了一种基于光纤布拉格光栅嵌入单模-多模纤芯-单模(single-mode-multimode fiber core-single mode, SMS)光纤结构的湿度传感器。当环境湿度变化时,SMS光纤结构的干涉光谱会发生漂移,而光纤布拉格光栅对湿度不敏感,其纤芯基模保持不变。因此利用SMS光纤结构对环境湿度的敏感性去调制光纤布拉格光栅纤芯基模,通过检测光纤布拉格光栅纤芯基模的反射能量变化就可以实现湿度测量。数值模拟了SMS光纤结构的内部光场分布规律,理论计算了不同环境折射率时,多模纤芯的长度、直径对SMS光纤结构输出能量耦合系数的影响。理论模拟表明,随着环境折射率变化,SMS光纤结构中传输的纤芯基模的输出能量耦合系数会发生变化。同时制作了传感器样品并对其进行了传感实验研究,实验结果表明多模纤芯长35 mm、纤芯直径为85 μm的传感器在45%～95%RH湿度变化范围内,湿度灵敏度为0.06 dBm·(%RH)-1。在20～80 ℃温度范围内,传感器的温度灵敏度为0.008 nm·℃-1,温度所带来的湿度测量误差为0.047%RH·℃-1。传感器具有制作简单、灵敏度高、反射式能量检测等优点,在湿度测量领域有一定的应用价值。     

Microwave generation analysis with higher order dispersion parameters in two cascaded Mach-Zehnder modulators

Dispersion is one of the major limiting factors for microwave/millimeter wave generation in microwave photonics. In this paper, we analyze the individual and combined effect of second order-, third order-, fourth order and fifth order dispersion parameter on microwave/millimeter wave generation. We have used the two cascaded Mach-Zehnder modulators in our proposed model, which have been not discussed earlier. Intensity at the output of photodetector versus modulation depth (β) with effects of dispersion parameters have been discussed and it has been found that output intensity of photodetector reduces when dispersion term up to fifth order are added.     

Tunable guided-mode resonance filter based on dielectric elastomer actuators

A tunable guided-mode resonant (GMR) reflection filter based on dielectric elastomer actuators (DEA) is designed. Simulating the characteristics of the filter with rigorous coupled wave analysis, it is shown that the resonant wavelength of the kind of GMR filter can be tuned from 1442.8 nm to 1644.6 nm by applying voltage on the dielectric elastomer actuators which changes the period of the grating layer of the GMR filter conveniently. Furthermore, there is an almost perfect linear relationship of resonant wavelength tuned and the period varied with negligible effect on the linewidth.     

Czerny-Turner正交型光栅单色仪的波长校准

研究了Czerny-Turner正交型光栅单色仪的波长校准技术。结合单色仪的结构参数和特点,提出以符合光栅方程的正弦曲线作为仪器出射波长的校准方程,基于最小二乘法原理给出校准方程的拟合残差表达式,由于校准方程的非线性,应用二维Nelder-Mead单纯形法求解拟合残差的待定系数,建立了波长与光栅转角的精确表达式,并通过实验验证了该算法的准确性。结果表明,经过校准的单色仪波长定位精度小于0.1nm,比设计要求提高一个数量级。该方法在Czerny-Turner正交型光栅单色仪的波长校准过程中,应用简单,容易实现,只需稍加修改步进电机的控制程序,即可完成对仪器出射波长的快速实时校准,实用性强。     

Hole-drilling method using grating rosette and Moiré interferometry

The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stress, then the strains resulting from the hole drilling is measured. The strains may be acquired from interpreting the Moire signature around the hole. In crossed grating Moire interferometry, the horizontal and vertical displacement fields （u and v） can be obtained to determinate two strain fields and one shearing strain field. In this paper, by means of Moire interferometry and three directions grating （grating rosette） developed by the authors, three displacement fields （u, v and s） are obtained to acquire three strain fields. As a practical application, the hole-drilling method is adopted to measure the relief strains for aluminum and fiber reinforced composite. It is a step by step method; in each step a single laminate or equivalent depth is drilled to find some relationships between the drilling depth and the residual strains relieved in the fiber reinforced composite materials.     

宽谱段光纤光谱仪

为满足野外现场矿物分析、遥感地面验证光谱分析等的需要,研制了实现光谱覆盖范围在400～2 500 nm的宽谱段光纤光谱仪,介绍了仪器研制过程中的光学、机械与电子学设计。光学系统采用了光栅分光的水平反射式光路,对于不同的光谱探测谱段,采用了三路线阵探测器在光谱面的3个方向立体交错放置进行探测;用CPLD(complex programmable logic device)实现对三路线阵光电器件时序逻辑信号的发生与驱动;采用14位高速ADC进行数模转换;采用USB2.0实现通讯。仪器体积小、光谱分辨率高、信号质量和测量速度等方面均达到了满意效果,测试结果表明,仪器实现了宽谱测量,光谱数据理想。     

光纤光栅传感器在大体积混凝土基础温度监测中的应用

光纤光栅传感器具有体积小、质量轻、灵敏度高、耐腐蚀、抗电磁干扰、传输频带较宽、易于进行分布式测量等诸多其他传感器所不具备的优点,更适用于现场的长期健康监测。大体积混凝土在施工过程中的温度问题如处理不当将会引起混凝土开裂。利用温度计、热电耦等作为传感器的传统的检测手段已经大大的制约了数据的准确性与精度。寻求一种高精度温度检测手段已经成为用于现场结构监测的前提。本文结合具体的工程实例介绍了光纤光栅传感器在基础混凝土温度监测中的应用,介绍了监测系统的组成,传感器的构造和标定,并利用实测温度预测基础混凝土底板中温度应力,及时采取措施防止混凝土的开裂。     

OPCPA系统中光栅对不平行度对脉冲时间波形的影响

 利用光线追迹法和四阶龙格-库塔法分析了光参量啁啾脉冲放大系统中实际展宽器和压缩器所带来的各阶色散,并将其代入放大过程数值模拟了脉冲变化的情况,讨论了压缩器光栅对表面不平行、刻线不平行、信号光强度、泵浦光强度等因素对输出脉冲宽度和时间波形的影响。结果表明,光栅对表面不平行将引起脉冲宽度变大,且光栅顺时针旋转对脉冲宽度和波形影响更大。而光栅刻线不平行时,当仅考虑二阶色散时,夹角为0.8°时脉宽最小,考虑到三阶色散时,夹角为1°脉宽最小,且光栅顺时针和逆时针旋转对脉冲的作用相同。对实际OPCPA系统,当放大晶体材料及长度一定时,尽量调整压缩器光栅平行,信号光强度和泵浦光强度有一最佳值能使输出脉冲宽度达到最小。     

采用HfO2/SiO2溶胶-凝胶薄膜制备衍射光栅

采用溶胶-凝胶方法制备了具有光敏性的HfO2/SiO2溶胶-凝胶薄膜,并利用其光敏性制备了衍射光栅.采用XPS分析了薄膜的成份,证实了Hf元素的存在.并用椭偏仪测试了薄膜的折射率,结果证实了HfO2的加入确实提高了体系的折射率.利用其光敏性,采用X射线作曝光光源通过掩模进行曝光,利用曝光部分与未曝光部分的溶解度差,在薄膜上制备了高为0.8 μm、周期为1 μm的衍射光栅.     

一种变象管分幅/扫描的高时间分辨光谱测量方法

本文详细介绍了西安光机所正在研制中的一种变象管瞬时光谱测量系统,它由WDG30型光栅光谱头与JTG 305型变象管分幅/扫描摄影机组成。文中给出了系统的总体设计考虑、变象管及其控制和主要性能参数。