Enhancement of light-emitting efficiency using combined plasmonic Ag grating and dielectric grating

Based on the analysis of the near-field evanescent wave in total internal reflection, the flip-chip light-emitting diode (LED) structure was proposed by placing a plasmonic Ag grating and a perforated sapphire grating in the substrate. The finite difference time domain (FDTD) method has been applied to study the spectral properties of the hybrid structure and the enhancement factor of light extraction efficiency of the LED model. From the computation examples, the effects of structure parameters on the extraction enhancement have been investigated. The results indicate that the plasmonic grating can enhance the near-field evanescent wave and couple it to propagation wave in the specific wavelength bands, which leads to the photons emitting out of the LED chip with high extraction efficiency. Due to the combined gratings used, the enhancement factor of the light extraction efficiency can reach approximately 4 times at a relatively longer wavelength.     

Perovskite-type oxide films combined with gratings for reduction of material consumption and improvement of thermochromism property

Combination of thermochromism of perovskite-type materials and gratings can result in some interesting variations of the spectral properties of structured surfaces. This paper aims at investigating thermal absorptive/radiative characteristics of structured thermochromic material La_0.825Sr_0.175MnO₃ (LSMO) with metallic and/or dielectric gratings. Numerical computation is conducted to obtain the distribution of the spectral absorptance of such structured surfaces with different structural parameters. The directional and temperature dependence of absorptance are also analyzed. The results reveal that compared with bulk LSMO material, the structured surface of LSMO achieves an improved thermochromic performance and much thinner layer of a structured LSMO film by combining the film with one-dimensional Al and SiO₂ gratings. Therefore, the other advantage of such structured surface is that the reduction of material consumption and weight is achieved due to the smaller LSMO layer thickness, which may be vital for thermal management of space vehicles.     

光栅压缩器中色散的矩阵计算

在ABCD矩阵基础上,通过引入角度色散项获得了可以方便描述色散系统的3×3阶矩阵.采用这种矩阵方程方便、准确地计算了标准光栅对压缩器中的二阶、三阶以及四阶色散,得到的结果与由常规积分法获得的结果相同.     

High-index contrast grating based broadband out-coupler on SOI

An efficient broadband out-coupler on silicon-on-insulator (SOI) with high-index contrast grating (HCG) is proposed. The presence of a silicon-air (high-index contrast) grating on the top silicon layer in SOI allows a strong interaction between the guided mode and the grating. The broadband design of the out-coupler is presented by optimising the various grating parameters. The design analysis and simulation of such an out-coupler is performed with finite difference method. Coupling efficiency of 54% is achieved over an ultra-wide wavelength range from 1500 nm to 1650 nm.     

Simple technique for alignment of a dispersive ring laser cavity

A simple technique for the alignment of a dispersive ring cavity consisting of a reflection-grating and two mirrors is described. Lasing on different rotational–vibrational transitions of CO₂ molecule is achieved in the ring configuration.     

Electrical Wavelength Switching of Ultrashort Pulses in a Mode-Locked Er-Doped Fiber Ring Laser with Fiber Gratings

Electrical wavelength switching of picosecond pulses was demonstrated in an actively mode-locked Er-doped fiber ring laser with fiber gratings by changing the electrical driving frequency of the modulator. Laser pulses switchable between two wavelengths spaced from 0.5 to 18 nm apart were achieved. The switching speed between the two wavelengths was of the order of several hundred kilohertz.     

对称面形光栅TE模的衍射特性

本文采用耦合波方法计算了对称面形光栅的衍射效率,分析了光栅截面面形为正弦、三角形、矩形、梯形光栅衍射效率与光栅周期、沟槽深度的关系,计算了光栅的峰值衍射效率。理论计算表明:合理地选择光栅周期、沟槽深度,对称面形光栅都可以达到很高衍射效率,接近100%;光栅的峰值衍射效率基本出现在Bragg衍射且光栅的周期等于衍射波长时。     

多缝衍射反演光谱学的稳定性理论研究── 一种第一类Fredholm积分方程数值解之稳定性分析

作者在前文￣（１，２）中通过计算机模拟实验给出了由多缝衍射反演光谱学的积分方程─一种第一类Ｆｒｅｄｈｏｌｍ积分方程─获得稳定线性方程组的条件，本文将进一步从数学上利用积分方程的本征值理论分析计算机的实验结果，阐明这些条件使线性方程组稳定的机制。     

Diffraction grating interferometers for mechanical characterisations of advanced fabric laminates

It is demonstrated that two grating interferometers with high spatial resolutions can successfully be applied for the mechanical characterisation of the advanced fabric composite materials. Based on these two techniques, the mechanical properties of two kinds of fabric laminates are obtained without assumption of uniform strain fields to be used in the characterisation approaches using the local strain sensors. The degree of the yarn crimp effects of the two laminates is compared in terms of the out-of-plane displacement derivatives. Especially, it is shown that the grating shearing interferometer is appropriate for the crimped fabric structure requiring a three-dimensional analysis. The modification from moiré interferometer to grating shearing interferometer is performed by introducing a Michelson interferometer modified for image shearing.     

A 3 kW average power tunable TEA CO2 laser

A high average power line-tunable TEA CO₂ laser is described. Average output power up to 3 kW is achieved at repetition rate of 180 Hz. The maximum output power is almost equal among the four spectrum bands of CO₂ laser (the P and R branches of 00°1–10°0 and 00°1–02°0 transition bands). Several special technologies including rotating spark gap switching, PCB (printed circuit board) preionization and zeroth-order grating coupling are employed.