基体改进-石墨炉原子吸收光谱法测定海水样品中痕量的铜

用石墨炉原子吸收光谱法测定海水中痕量铜.对基体改进剂进行了筛选,采用HNO3-酒石酸体系,克服了海水基体的干扰,并对试剂进行了空白对照实验.在确定了升温程序的基础上,用标准加入法测定样品.使用国家标准溶液作为质控样,对方法的精密度和准确性做了验证.     

Atomistic simulation of sorption in model pores with reduced spatial periodicity

Grand Canonical Monte Carlo (GCMC) was used to study the sorption thermodynamics of carbon dioxide in model graphite slit-like pores and nanotubes by means of the Ewald technique, suitably adapted for the computation of long range (electrostatic) interactions of sorbates confined in pore systems exhibiting reduced periodicity in space. The computed thereby micropore size distributions extracted via mathematical elaboration of the simulation results with respect to real graphitic materials, reproduced successfully the experimentally measured isotherms of carbon dioxide in these materials at various temperatures. In the case of nanotubes, a direct Coulomb summation over a large number of periodic images proved to be a sufficient approximation leading to excellent agreement between the simulated and measured isotherms.     

Thin graphite overlayers: Graphene and alkali metal intercalation

Using LEED and angle resolved photoemission for characterisation we have prepared graphite overlayers with down to monolayer thickness by heating SiC crystals and monitored alkali metal intercalation for the multilayer films. The valence band structure of the monolayer is similar to that calculated for graphene though downshifted by around 0.8 eV and with a small gap at the zone corner. The shift suggests that the transport properties, which are of much present interest, are similar to that of a biased graphene sample. Upon alkali metal deposition the 3D character of the π states is lost and the resulting band structure becomes graphene like. A comparison with data obtained for ex situ prepared intercalation compounds indicates that the graphite film has converted to the stage 1 compounds C₈K or C₈Rb. Advantages with the present preparation method is that the graphite film can be recovered by desorbing small amounts of alkali metal and that the progress of compound formation can be monitored. The energy shifts measured after different deposits indicate that saturation is reached in three steps. Our interpretation is that in the first the alkali atoms are dispersed while the final steps are characterized by the formation of first one and then a second (2 × 2) ordered alkali metal layer adjacent to the uppermost carbon layer.     

Self-assembly of 5-octadecyloxyisophthalic acid and its coadsorption with terephthalic acid

The structure of the self-assembled monolayer of pure 5-octadecyloxyisophthalic acid (5OIA), and the coadsorption monolayer of 5OIA and terephthalic acid, is investigated using scanning tunneling microscopy (STM) at the liquid-solid interface. 5OIA self-assembles into a monolayer comprised of different structures. For the major phase, 5OIA molecules alternately pack with opposite enantiotopic faces in a lamella, giving lamellae with a chain-to-trough angle of ∼88°. Two adjacent lamellae are assembled together by a hydrogen-bonding network between two carboxylic acid groups from each lamella. In the self-assembled monolayer of the mixture solution of 5OIA and terephthalic acid, 5OIA molecules coadsorb with terephthalic acid and therefore form two stoichiometric multi-component domains. Each domain has a molar ratio of 2:1 for 5OIA and terephthalic acid. For each component (5OIA or terephthalic acid), the two coadsorption structures exhibit opposite chirality.     

Influence of intramolecular vibrations in charge redistribution at the pentacene-graphite interface

We have investigated the relation between the intramolecular vibrational modes of pentacene and the charge redistribution at the pentacene-graphite interface by using high-resolution electron-energy-loss-spectroscopy. The three main vibrational peaks shift to lower energies as the pentacene film thickness decreases. In order to discuss this energy shift, we have calculated the vibrational energies of a free pentacene molecule by changing its charge state. We have also calculated the vibrational energies of a pentacene molecule adsorbed on a graphite sheet by changing the pentacene-graphite distance. Taking the experimental and calculation results into account, we conclude that the observed energy shifts result from an intramolecular charge redistribution. The present results indicate that the effect of an intramolecular charge redistribution is essential to discuss the origin of an energy shift observed in a vibrational study of an organic molecule/substrate interface.     

石墨负极表面聚合物功能保护膜对 锂离子电池存储寿命的提升

采用溶液浸渍法制备了聚乙烯醇(PVA)均匀包覆的石墨并研究了其微观形貌及电化学性能. 以LiNi_0.8Co_0.15Al_0.05O₂(NCA)为正极材料、 PVA包覆石墨为负极材料组装成软包电池和钢壳电池, 研究了PVA功能保护膜对全电池的电化学性能和存储寿命的影响. 结果表明, 存储过程中PVA功能保护膜可以有效抑制电解液和石墨内嵌锂反应的发生, 延长电池的存储寿命.     

聚四氟乙烯和石墨对聚醚酰亚胺摩擦学性能的影响

将聚四氟乙烯(PTFE)和石墨两类减摩耐磨填料填充到聚醚酰亚胺(PEI)中,表征其摩擦性能,利用扫描电子显微镜分析了磨损表面的显微结构,并分析了磨损机制.研究结果表明,PTFE和石墨的填充明显改善了PEI的摩擦磨损性,摩擦系数降低到0.3以下(纯PEI的摩擦系数为0.41),磨损率降低了3个数量级.在PTFE体系中,PTFE质量分数为10%时,PEI基共混材料的摩擦系数最低为0.23;而在质量分数为15%的石墨体系中,PEI基共混材料摩擦系数最低为0.27.磨损率随着填料含量的增加而逐渐下降,在填料质量分数为20%之后,摩损率下降平缓.因此PTFE和石墨的填充对PEI的摩擦学性能起到了很好的改善作用,而且PTFE比石墨的改善效果更优益.共混物的机械性能测试结果表明,在填料质量分数为5%~15%时,共混物具有良好的机械性能.     

Electrochemistry of vanadium-doped tetragonal and monoclinic ZrO2 attached to graphite/polyester composite electrodes

The electrochemistry of monoclinic and tetragonal vanadium-doped zirconias (VZrO₂), prepared from gel precursors with vanadium loadings ranging from 0.5 to 15 mol%, has been studied using abrasive-conditioned graphite/polyester composite electrodes immersed in aqueous HCl and HClO₄ solutions. Isolated vanadium centers form a solid solution in the zirconia lattice with a solubility limit close to 5 mol%. Above 5 mol%, finely dispersed V₂O₅ is formed. Vanadium centers located at the boundary sites of the zirconia lattice display successive one-electron transfer processes near to +0.25 and +0.10 V vs. SCE, whereas finely dispersed V₂O₅ yields three successive reduction processes at +0.46, +0.30, and +0.16 V vs. SCE. Electrochemical data indicate the presence of both V⁵⁺ and V⁴⁺ centers in the lattice of monoclinic and tetragonal zirconias, the V⁵⁺/V⁴⁺ ratio decreasing as the vanadium loading increases. Electronic Publication     

石墨炉原子吸收光谱法测定保健品松花粉中痕量铅

实验通过采用优级纯以上试剂降低本底,多道程序清洗器皿控制污染,通过控制酸量改善测定铅的信噪比,降低检出限,引入基体改进剂磷酸二氢铵消除基体干扰.优化石墨炉检测条件下,松花粉样品中铅的加入平均回收率达到90％以上.使用标准物质(茶叶GBW10016)对该方法进行了验证,结果表明铅的测定值在标准物质的保证值范围内.该方法能...     

Method development for the determination of iron in milligram amounts of rice plants (Oryza sativa L.) from cultivation experiments using graphite furnace atomic absorption spectrometry

The amount of sample that is available for analysis in laboratory plant cultivation experiments is usually very limited. Highly sensitive analytical techniques are therefore required, even for elements that are present in the plants at mg g^–1 concentrations, and graphite furnace atomic absorption spectrometry (GFAAS) was chosen in this work because of its micro-sampling capability, and its relatively simple operation. Four micro-methods were investigated for the determination of iron in roots and leaves of rice plants: i) a micro-digestion with nitric and hydrochloric acids, ii) a slurry procedure using tetramethylammonium hydroxide (TMAH) tissue solubilizer, iii) a slurry prepared in 1.4 mol L^–1 nitric acid, and treated in an ultrasonic bath, and iv) the direct analysis of solid samples. The micro-digestion was suffering from high blank values and contamination problems, so that it could not be recommended for routine purposes. The TMAH method exhibited poor precision and occasional low recoveries, particularly for real samples. Direct solid sampling analysis gave results similar to those obtained with the slurry technique with ultrasonic agitation for the determination of iron in certified reference materials with iron content up to about 100 g g^–1, but was too sensitive for the investigated rice plants, which had an iron content up to several mg g^–1. The slurry technique with ultrasonic treatment of the samples, suspended in dilute nitric acid, was finally adopted as the method of choice.The method was then applied for the determination of iron in the leaves and in different compartments of the roots of two rice cultivars, one sensitive to iron toxicity, an important nutritional disorder, and the other one resistant to iron toxicity. The results suggest that the higher resistance to iron toxicity of the second cultivar is due to a smaller uptake of iron from the soil, resulting in lower iron levels in all compartments of the plant.