An emerging strategy for tracing the anti-erectile dysfunction components of raw and salt-processed semens of Astragali Complanati by combinatory liquid chromatography–mass spectrometry-based quantitative analysis,efficacy assessment on impotent rats,and partial least squares regression

Semens of Astragali Complanati own anti-erectile dysfunction effect; however, the components which contribute to the anti-erectile dysfunction effect remain unclear. This work raised a strategy that integrates liquid chromatography coupled mass spectrometry-based quantitative analysis, anti-erectile dysfunction assessment on impotent rats, and their relationship analysis for pinpointing anti-erectile dysfunction components from semens of Astragali Complanati. For simultaneous quantification of seven major components in raw and salt-processed semens of Astragali Complanati, an accurate and reliable liquid chromatography–mass spectrometry method was developed under multiple reaction monitoring mode. Of note, chloramphenicol was employed as the internal standard. The method showed good linearity and repeatability, where the recovery rates of each component ranged from 98.1 to 104.7%, and the precisions of intra- and interday were all within 3.4%. The method has been used for quantification of the seven major components in 10 batches of raw and salt-processed semens of Astragali Complanati. Then, the anti-erectile dysfunction effects of raw and salt-processed semens of Astragali Complanati were evaluated on impotent rats. Gray relationship analysis and partial least squares regression were combined for elucidating the relationship. As a result, complanatuside, astragalin, complanatoside B, and kaempferol were found to be responsible for anti-erectile dysfunction effect of Astragali Complanati.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.     

Branched plasticizers derived from eugenol via green polymerization for low/non-migration and externally/internally plasticized polyvinyl chloride materials

The synthesis of nontoxic plasticizers derived from the waste residues of the rosin-processing industry can reduce pollution and promote the high-value utilization of the waste residues of rosin. In this study, four kinds of sustainable branched plasticizers derived from a biomass resource, eugenol (derived from the waste residues of the rosin processing industry), were synthesized via one-pot solvent free polymerization and used to plasticize polyvinyl chloride (PVC). Internally plasticized PVC was fabricated using thiolated DPE (branched plasticizers based on eugenol). The thermal stability, tensile properties, microstructure, volatility behavior, and solvent extraction resistance of plasticized PVC were investigated. Compared with the behavior of the commercial plasticizer dioctyl phthalate, the thermal stability, plasticizing efficiency, and migration resistance of the branched plasticizers are superior. The acute oral toxicity dose of each branched plasticizer was extremely high at 5000 mg/kg of body weight, with no deaths among test animals. Compared with externally plasticized PVC, the internally plasticized PVC showed zero weight loss in volatility and leaching tests despite its less effective plasticization. All the branched plasticizers have potential application in plastic products.     

Actuating Shape Memory Polymer for Thermoresponsive Soft Robotic Gripper and Programmable Materials

For soft robotics and programmable metamaterials, novel approaches are required enabling the design of highly integrated thermoresponsive actuating systems. In the concept presented here, the necessary functional component was obtained by polymer syntheses. First, poly(1,10-decylene adipate) diol (PDA) with a number average molecular weight M_n of 3290 g·mol⁻¹ was synthesized from 1,10-decanediol and adipic acid. Afterward, the PDA was brought to reaction with 4,4′-diphenylmethane diisocyanate and 1,4-butanediol. The resulting polyester urethane (PEU) was processed to the filament, and samples were additively manufactured by fused-filament fabrication. After thermomechanical treatment, the PEU reliably actuated under stress-free conditions by expanding on cooling and shrinking on heating with a maximum thermoreversible strain of 16.1%. Actuation stabilized at 12.2%, as verified in a measurement comprising 100 heating-cooling cycles. By adding an actuator element to a gripper system, a hen’s egg could be picked up, safely transported and deposited. Finally, one actuator element each was built into two types of unit cells for programmable materials, thus enabling the design of temperature-dependent behavior. The approaches are expected to open up new opportunities, e.g., in the fields of soft robotics and shape morphing.     

An evaluation method based on absolute difference to validate the performance of SBNUC algorithms

Scene-based non-uniformity correction (SBNUC) algorithms are an important part of infrared image processing; however, SBNUC algorithms usually cause two defects: (1) ghosting artifacts and (2) over-correction. In this paper, we use the absolute difference based on guided image filter (AD-GF) method to validate the performance of SBNUC algorithms. We obtain a self-separation source using the improved guided image filter to process the input image, and use the self-separation source to obtain the space-high-frequency parts of the input image and the corrected image. Finally, we use the absolute difference between the two space-high-frequency parts as the evaluation result. Based on experimental results, the AD-GF method has better robustness and can validate the performance of SBNUC algorithms even if ghosting artifacts or over-correction occur. Also the AD-GF method can measure how SBNUC algorithms perform in the time domain, it’s an effective evaluation method for SBNUC algorithm.     

Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

High pressure and thermal pasteurization effects on sweet cherry juice microbiological stability and physicochemical properties

This study evaluated high pressure processing (P1 – 400?MPa/5?min; P2 – 550?MPa/2?min) and thermal pasteurization (TP – 70°C/30?s) effects on sweet cherry juice's microbiological and physicochemical parameters, during four weeks of refrigerated storage. All treatments reduced the microbiological load to undetectable levels not affecting total soluble solids and titratable acidity. The pH increased with all treatments, however, it decreased during storage. Phenols were differently affected: TP increased them by 6%, P1 had no effect while P2 decreased them by 11%. During storage, phenols in control and TP samples decreased by 26% and 20%, P1 samples decreased them by 11% whereas P2 showed no variation. TP had no effect on anthocyanins, while pressure treatments increased them by 8%. Anthocyanins decreased during storage, particularly in the control and P1 (decreasing 41%). All treatments had no effect on antioxidant activity until the 14th day, thereafter high pressure processing samples showed the highest antioxidant activity.     

基于AltiVec技术的PowerPC处理器矢量运算性能测试

基于AltiVec技术的PowerPC处理器,在很多嵌入式信号处理领域已经取代传统的DSP处理器成为信号处理器件的首选。为了评估基于AltiVec技术的PowerPC处理器的矢量运算性能和信号处理能力,选取MPC8641D处理器为硬件测试平台,采用符合VSIPL标准的VSI/Pro Core矢量库和ixlibsav矢量库,通过测试复乘和FFT典型算法不同类型的运算时间,对AltiVec处理单元的矢量运算性能进行了测试评估。通过对测试结果的分析,基于AltiVec技术的PowerPC处理器具备强大的矢量运算处理性能,可以满足嵌入式数字信号处理技术对高性能处理器的需求。     

基于CAN总线的遥测数据处理模块软件设计

随着飞行器电子综合化技术的发展,数据总线在飞行器中得到大量应用。为满足某飞行器总线系统测量的需求,本文设计了一种基于CAN总线的遥测数据处理模块。硬件部分主要由CAN总线驱动器模块、DSP数字信号处理模块、FPGA逻辑处理模块组成。软件设计包括TMS320F28335的初始化,CAN总线数据处理和外部中断处理三部分。该模块用于某飞行器双路CAN总线数据的采集及处理,并经过了多次飞行试验验证。该模块简化了系统设计,实现了高速、可靠的CAN总线遥测数据处理。