Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.     

Processing polyamides with superheated water

Superheated water (shH₂O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH₂O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH₂O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH₂O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH₂O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH₂O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH₂O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH₂O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 803–813     

Digital Interferometric Measurement of Forced Convection Heat Transfer in a Miniature Rectangular Channel

Investigations have been performed on convective heat transfer in water flowing through mini-channels using the non intrusive technique of laser interferometry coupled with digital image processing. Optical glass channels, fabricated with metallic heating surfaces, were studied using a Mach-Zehnder interferometer configuration. Fringe patterns captured using a high-sensitivity CCD camera were analyzed digitally based on a calculation method developed for the liquid medium. Results of parametric studies were compared and contrasted with relevant theoretical solutions from the literature. Indication of the onset of turbulence at Reynolds numbers smaller than the conventional transition Reynolds number for large channels has also been noticed in the experimental investigation.     

Performance investigation of an advanced tracked prime mover on the low bearing soil

This study has presented a performance investigation of an advanced tracked prime mover for the operation of agricultural goods and other operations on peat terrain. The maximum and continuous traction torque of the prime mover has been developed by designing an advanced controller for controlling the intelligent system. The prime mover’s mobility is studied with ultrasonic displacement sensor, torque transducer, National Instrument cRIO-9004 Compact-RIO Real-time Controller Unit (RCU), a National Instrument TPC 2106T Touch Panel Control (TPC), a Trimble AG132 GPS antenna and receiver unit, and a Dlink DIR-655 router. The fuzzy logic controller (FLC) has been equipped with the prime mover hydraulic system to increase the traction torque of the hydraulic motor when the prime mover’s sinkage is more than or equal to 70 mm. The prime mover’s design demonstrates good potential in traversing peat terrain as the measured tractive effort was found to be 48% of the vehicle’s gross weight while the recommended tractive effort is in the range of 30–36% of the vehicle’s gross weight.     

Two stage electrostatic separator for the recycling of plastics from waste electrical and electronic equipment

The aim of study was to evaluate the effectiveness of a new facility for recycling of plastics from granular waste electrical and electronic equipment. The installation consists of two sections, the products of a first tribo-aero-electrostatic separator being subsequently treated in two free-fall electrostatic separators. The tests were performed on a mixture of polycarbonate (PC) and polyamide (PA). Analysis of the purity of the products obtained was performed using a program of image processing in MATLAB. Products of very high purity (roughly 95% for both PC and PA) were obtained at a recovery rate higher than 70%.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

Simultaneous quantification of ten Amadori compounds in tobacco using liquid chromatography with tandem mass spectrometry

Amadori compounds are aroma precursors formed in the initial phase of the Maillard reaction. Based on their similar structures, simultaneous quantification of more than six Amadori compounds in tobacco has not been reported yet. In this study, a simple and rapid method was developed to simultaneously quantify ten Amadori compounds including the isomers of Fructose‐isoleucine and Fructose‐leucine in tobacco. The separation was performed on an Atlantis T₃ column (2.1 × 250 mm, 5 μm) by gradient elution using acetonitrile and water as the mobile phases. The quantification method was systematically evaluated and proven to be sensitive and accurate. The linearity was good, with correlation coefficients of 0.9977–0.9999. The limits of detection and quantitation were 1.354–2.532 and 4.516–8.444 ng/mL, respectively. The recoveries were 84.0–119.6%, and the relative standard deviations were 1.33–5.40%. The method was used to analyze the changes in the amounts of ten Amadori compounds in tobacco before and after tobacco primary processing. The analysis shows that the Maillard reaction occurs during the short processing period.     

Isomers of B←N-Fused Dibenzo-azaacenes: How B←N Affects Opto-electronic Properties and Device Behaviors?

The B←N unit has a large dipole and it is isoelectronic to C−C moiety with no dipole. Incorporating B←N units into π-conjugated system is a powerful strategy to design organic small molecules and polymers with intriguing opto-electronic properties and excellent opto-electronic device performance. However, it is unclear how the B←N unit affects electronic structures and opto-electronic properties of large π-conjugated molecules. In this work, to address this question, we developed three dibenzo-azaacene molecules in which two B←N units were introduced at different positions. Although the dibenzo-azaacene skeleton is fully π-conjugated, the effect of B←N unit on the electronic structures of the adjacent rings is much stronger than that of the distant rings. As a result, the three molecules with isomerized B←N incorporation patterns possess different electronic structures and exhibit tunable opto-electronic properties. Among the three molecules, the centrosymmetrical molecule exhibits higher LUMO/HOMO energy levels than those of the two axisymmetrical molecules. When used as the active layer in organic field-effect transistors (OFETs), while the two axisymmetrical molecules show unipolar electron transporting property, the centrosymmetrical molecule exhibits ambipolar hole and electron transporting behavior. This work not only deepens our understanding on organoboron π-conjugated molecules, but also indicates a new strategy to tune opto-electronic properties of organic semiconductors for excellent device performance.     

Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.