反射式光纤传感器光纤参量对调制系数的影响

介绍了反射式强度型光纤传感器的光强调制原理,并以最简单的光纤对为基础,仿真研究了光纤参量对光强调制特性的影响规律.给出了这类传感器设计的指导原则.     

广义Gr(o)tzsch环函数的近似凹凸性

In this paper, the so-called approximate convexity and concavity properties of generalized Groetzsch ring function μa （r） by studying the monotonieity,convexity or concavity of certain composites of μa（r） are obtained.     

A study of interface characteristics in HfAlO/p-Si by deep level transient spectroscopy

Deep level transient spectroscopy (DLTS) and high-frequency capacitance-voltage (HF-CV) measurement are used for the investigation of HfAlO/p-Si interface. The so-called “slow” interface states detected by HF-CV are obtained to be 2.68 × 10¹¹ cm⁻². Combined conventional DLTS with insufficient-filling DLTS (IF-DLTS), the true energy level position of interfacial traps is found to be 0.33 eV above the valance band maximum of silicon, and the density of such “fast” interfacial traps is 1.91 × 10¹² cm⁻² eV⁻¹. The variation of energy level position of such traps with different annealing temperatures indicates the origin of these traps may be the oxide-related traps very close to the HfAlO/Si interface. The interfacial traps’ passivation and depassivation effect of postannealing in forming gas are shown by comparing samples annealed at different temperatures.     

Temperature‐dependent electroluminescence intensity in green and blue (In,Ga)N multiple‐quantum‐well diodes

The electroluminescence (EL) intensity has been investigated of green and blue (In,Ga)N multiple‐quantum‐well diodes grown on c ‐plane sapphire over a wide temperature range and as a function of current between 0.01 mA and 10 mA. The EL intensity of the green diode with p‐(Al,Ga)N electron blocking layer does not show low‐temperature quenching, especially at low injection levels, previously observed for the blue (In,Ga)N quantum‐well diodes. This finding rules out possi‐ bilities that the freeze‐out of holes at deep Mg acceptor levels and the failure of hole injections through the p‐(Al,Ga)N layer are directly responsible for the EL quenching at temperatures below 100 K. Variations of the EL efficiency with current level suggest that capture/escape efficiencies of injected carriers by the wells play an important role for the determination of EL external quantum efficiency. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dynamical behaviors of nonlinear viscoelastic thick plates with damage

Based on the deformation hypothesis of Timoshenko's plates and the Boltzmann's superposition principles for linear viscoelastic materials, the nonlinear equations governing the dynamical behavior of Timoshenko's viscoelastic thick plates with damage are presented. The Galerkin method is applied to simplify the set of equations. The numerical methods in nonlinear dynamics are used to solve the simplified systems. It could be seen that there are plenty of dynamical properties for dynamical systems formed by this kind of viscoelastic thick plate with damage under a transverse harmonic load. The influences of load, geometry and material parameters on the dynamical behavior of the nonlinear system are investigated in detail. At the same time, the effect of damage on the dynamical behavior of plate is also discussed.     

Parameter identifications for a rotor system based on its finite element model and with varying speeds

In order to achieve prediction for vibration of rotating machinery, an accurate finite element （FE） model and an efficient parameter identification method of the rotor system are required. In this research, a test rig is used as a prototype of a rotor system to validate a novel parameter identification technique based on an FE model. Rotor shaft vibration at varying operating speeds is measured and correlated with the FE results. Firstly, the theories of the FE modelling and identification technique are introduced. Then disk unbalance parameter, stiffness and damping coefficients of the bearing supports on the test rig are identified. The calculated responses of the FE model with identified parameters are studied in comparison with the experimental results.     

Parameter identification in a soil with constant diffusivity

We consider infiltration into a soil that is assumed to have hydraulic conductivity of the form K = K = K_se^h and water content of the form = K – _r. Here h denotes capillary pressure head while K_s, , and _r represent soil specific parameters. These assumptions linearize the flow equation and permit a closed form solution that displays the roles of all the parameters appearing in the hydraulic function K and . We assume K_s and _r to be known. A measurement of diffusivity fixes the product of and resulting in a parameter identification problem for one parameter. We show that this parameter identification problem, in some cases, has a unique solution. We also show that, in some cases, this parameter identification problem can have multiple solutions, or no solution. In addition it is shown that solutions to the parameter identification problem can be very sensitive to small changes in the problem data.     

二维稳态各向异性介质渗透率的反演问题

1.引 言由多孔介质的渗流理论,二维稳态各向异性介质的渗流问题满足下列偏微分方程 -div(u(x,y)(?)u(x,y))=f(x,y),(x,y)∈Ω(?)R2, (1.1)     

排序问题中优化准则关于基本参数的正则性及其应用

本文提出了优化准则关于加工时间、准备时间、应交工时间的正则性，利用这种正则性对寻找参数可控排序问题中的有效值、有效解给出了一直观算法，并指出对一些具体的参数可控排序问题，其有效值、有效解的寻找可通过对这一直观算法加以具体化而得．文中还对平均流程问题给出了这样一个具体化算法．     

关于图的若干介值问题

对连通图G,以C_i(G),■(G)分别表G的有i条边的连通支撑子图之集与连通子图之集,以C~i(G),(?)(G)分别表G的顶点数为i的子树集与连通子图之集.本文讨论了这四类子图簇对若干基本参数及端点数的介值性,从而对已有的一些结果作了若干有意义的拓广.