Synthesis and characterization of P2O5–SiO2–X (X = phosphotungstic acid) glasses as electrolyte for low temperature H2/O2 fuel cell application

A new class of proton conducting glass membranes for hydrogen fuel cell applications are being developed using phosphotungstic acid. These glasses are being design to yield high proton conductivities could be potential substitutes for electrolytes in H₂/O₂ fuel cell. P₂O₅–SiO₂–PWA glasses have been non-crystalline phases confirmed by structural studies. The glass materials showed good mechanical and thermal stability, and also found a maximum proton conductivity of 9.1 × 10⁻² S/cm at 90 °C and 30% RH. The average pore size less than 5 nm was determined by Barrett–Joyner–Halenda (BJH) desorption method. The electrochemical activity was investigated by polarization curves and current–voltage profiles. A maximum power density value of 10.2 mW/cm² was obtained using 0.15 mg/cm² of Pt/C loaded on electrode and 5P₂O₅–87SiO₂–8PWA glasses at 30 °C and 30% humidity.     

Simplified Solid-Phase Extraction Procedure and Liquid Chromatographic Determination of Celecoxib in Rat Serum

A simplified solid phase extraction method, eliminating a preliminary protein precipitation has been developed for the determination of celecoxib in rat plasma. The technique included a solid phase extraction of the serum samples on a [poly (divinylbenzene-co-N-vinylpyrrolidone)] sorbent. After conditioning, the cartridge was loaded with 0.5 mL of acidified serum containing internal standard. Elution was made with 1 mL of a mixture of acetonitrile and methanol (1/1, v/v). After evaporation of the eluate to dryness and reconstitution with methanol, the samples were analyzed on an octadecyl bonded phase with several mobile phases containing acetonitrile and a phosphate buffer. Detection was carried out using a Photodiode Array Detector. Full validation of the proposed method was provided (linearity range: 0.01–2 mg. L^–1, average extraction efficiency: 92.4%; average intra-day variability: 4.6% with an accuracy of 94.8%; average interday variability: 5% with an accuracy of 95.3%, limit of detection: 0.005 mg. L^–1, limit of quantification: 0.002 mg. L^–1). The proposed method was successfully utilised to quantify celecoxib in rat plasma for a pharmacokinetic study.Revised: 26 January and 23 April 2004     

Determination of trichothecenes in cereals by gas chromatography with ion trap detection

Summary A method for determination of the trichothecene toxins, deoxynivalenol, 3α-acetyl-deoxynivalenol, nivalenol, T-2 toxin, HT-2 toxin and diacetoxyscirpenol in cereals (wheat, barley, oats, corn) is described. Extraction was performed according to Tanaka et al. (J. Chromatogr.328, 271 (1985)) [33], derivatization by trifluoroacylation with trifluoroacetic acid anhydride. For quantitation and confirmation a capillary gas chromatograph combined with a selective mass detector (ion trap) working in CI-mode with methanol as reagent gas was used. The quantitation limit for the complete method is 1–5 μg/kg, depending on the chemical characteristics of each toxin and cleanness of the extracts. Recoverics from spiked cereals were 78–89%.     

Determination of the sulfur components of gasoline streams by capillary column gas chromatography with sulfur chemiluminescence detection

A method using a sulfur chemiluminescence detector (SCD) has been developed for the qualitative and quantitative determination of sulfur components in stabilized gasoline-range process streams, including blended gasolines containing between 1 and > 4000 ppm total sulfur. The detection limit per sulfur component was approximately 50 ppb. On-column injection was employed for optimum precision and accuracy. A new probe material was found which did not soften under FID operating conditions. A new method, using a hydrogen sulfide permeation tube, was developed for rapid alignment of the probe in the FID.     

Microdetermination of sulfite with a piezoelectric crystal detector

A piezoelectric method is proposed for the determination of sulfite in concentration range 1 × 10^–7–1 × 10^–5 mol/1. The method is based on the redox reaction of sulfite with iodine followed by measuring frequency change of the piezoelectric crystal caused by the unreacted iodine. The method is applied to the determination of sulfite in liquor.     

Continuous determination of carbon dioxide evolved during thermal decomposition reactions

A simple device suitable for continuous monitoring of carbon dioxide evolved during thermal decomposition reactions is described. Carbon dioxide is transported by a carrier gas through the device connected to thermoanalytical equipment and absorbed by soda lime reagent. The reaction heat released is linearly proportional to the amount of carbon dioxide absorbed.     

Study of poly(bisphenol A carbonate) relaxation kinetics at the glass transition temperature

In this work, the variations of the relaxation times are investigated above and below the glass transition temperature of a model amorphous polymer, the polycarbonate. Three different techniques (calorimetric, dielectric and thermostimulated currents) are used to achieve this goal. The relaxation time at the glass transition temperature was determined at the temperature dependence convergence of the relaxation times calculated with dynamic dielectric spectroscopy (DDS) for the liquid state and thermostimulated depolarisation currents (TSDC) for the vitreous state. We find a value of τ(T_g) = 110 s for PC samples. The knowledge of the temperature dependence, τ(T), and the value τ(T_g) enables to determine the glass-forming liquid fragility index, m. We find m = 178 ± 5.     

Comparative study of the instrumental couplings of high performance liquid chromatography with microwave-assisted digestion hydride generation atomic fluorescence spectrometry and inductively coupled plasma mass spectrometry for chiral speciation of selenomethionine in breast and formula milk

A comparison of chiral separation and analysis of selenomethionine in breast and formula milk, using high performance liquid chromatography (HPLC) on a glycopeptide teicoplanin-based chiral stationary phase (Chirobiotic T), coupled to atomic fluorescence spectrometry (AFS) and inductively coupled plasma (ICP) MS detectors has been performed. The coupling HPLC-microwave-assisted digestion hydride generation requires on-line post-column analytes treatment, and a severe sample clean-up for fat and proteins elimination using centrifugation and ultrafiltration. Underivatized -selenomethionine enantiomers were completely resolved in 10 min using unbuffered water mobile phase at 1 ml min⁻¹ flow. Good selectivity and sensitivities (detection limits 3.1 and 3.5 ng ml⁻¹ as Se for - and -selenomethionine, respectively) were obtained, and method robustness and simplicity, together to the low cost of AFS detector, makes it suitable for infant milk routine analysis. HPLC–ICP-MS coupling exhibits very low detection limits (0.9 ng ml⁻¹, as Se) for each -selenomethionine enantiomers, but the method suffers from matrix influence, that produces a poor S/N ratio and low reliability.

The methods were applied to breast and formula milk samples with recoveries of 80% of the total selenium presence, which is attributable to the existence of other unknown species. -Selenomethionine was the only isomer present in breast milk, but a 30% of -selenomethionine was also detected in formula milk.     

Application of the Hall™ electrolytic conductivity detector for the analysis of chloroanilines and chloronitroanilines in POTW sludges

Simultaneous detection with a 700-A Hall? and an NPD detector is an effective technique for characterizing chloro-and chloronitroanilines in highly complex Publicly Owned Water Treatment Works (POTW) sludges. The utilization of a modified Varian effluent splitter and a SE-54 fused silica capillary column permitted the detection of mid-picogram quantities of the polar chloroanilines without sacrificing peak shape. The response of the Hall? detector in the halogen mode was roughly proportional to the number of chlorine atoms present, while the response of the Hall? in the nitrogen mode and the NPD was less predictably influenced by the presence of one or more nitro groups. When combined with retention time data, the ratio of the NPD response to the Hall? response has been found to substantiate the presence of chloro- and chloronitroanilines in sludge extracts.     

Study on the thermal stability of a chiral stationary phase coated on capillaries for GC

A chiral stationary phase prepared by bonding L -valine-t-butylamide to XE-60 has been coated on glass and metal capillaries. The performances of the chiral glass and metal columns were equivalent to those of commercial fused silica capillary columns. The thermal stability of the glass column was examined up to 280°C. It was found that no appreciable change in separation factor (α value) was observed up to 230°C. The α values gradually decreased between 240 and 260°C, and enantiomer separation was no longer achieved at 280°C. It was concluded that the allowable upper limit temperature of the chiral stationary phase is between 230 and 240°C in the isothermal mode, and ca 260°C in temperature-programmed mode.