Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Solution Stoichiometry Control for Pure LiLaMo2O8Phases in Sol-Gel Preparation

The hydrolysis of solutions, containing either LiMo₂O₄(OPr ⁱ )₅( ⁱ PrOH) and “La(OPr ⁱ )₃” or LiOPr ⁱ and La₂Mo₄O₈(OPr ⁱ )₁₄ in 1∶1 ratio, in toluene or ⁱ PrOH, by water solutions in isopropanol, leads to formation of monolythic gels. The latter can be converted by drying and heat treatment at 600°C into a fine powder of pure α-LiLaMo₂O₈ phase, which is transformed into β-LiLaMo₂O₈ powder by annealing at 800°C. The sintering of the pellets pressed under 4 bar pressure of α-LiLaMo₂O₈ powder at 800°C for 2 h converts them into pieces of β-LiLaMo₂O₈ transparent ceramics, thus providing a route to LiLnMo₂O₈ laser waveguide materials.     

Immobilization of copper in organic-inorganic hybrid materials: a highly efficient and reusable catalyst for the Ullmann diaryl etherification

The immobilization of copper in organic-inorganic hybrid materials catalyzing the Ullmann reaction has been described. Phenols reacted with aryl iodides, aryl bromides and aryl chlorides smoothly in the presence of a 3-(2-aminoethylamino)propyl functionalized silica gel immobilized copper catalyst. The protocol involved the use of DMSO as the solvent, and potassium fluoride as the base. The reactions generated the corresponding cross-coupling products in good to excellent yields. Furthermore, the silica-supported copper could be recovered and recycled by a simple filtration of the reaction solution and used for 10 consecutive trials without loss of its reactivity.     

Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Adsorption of Pd, Ni, and Cu ions on anode-oxidized carbon fiber materials

The anodic oxidation of the carbon felt Carbonetcalon results in the formation of surface defects which serve as centers of strong adsorption of Pd^II, Ni^II, and Cu^II ions. The electrochemical reduction of adsorbed ions makes it possible to obtain metallic catalysts, which undergo multiple redox cycles without loss of metal. The catalysts are characterized by high dispersity of the reduced phase, high adsorption capacity with respect to hydrogen, and 100% selectivity in hydrogenation of acetophenone. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 81–85, January 1997     

Classification of oxide glasses: A polarizability approach

A classification of binary oxide glasses has been proposed taking into account the values obtained on their refractive index-based oxide ion polarizability α_O2−(n₀), optical basicity Λ(n₀), metallization criterion M(n₀), interaction parameter A(n₀), and ion's effective charges as well as O1s and metal binding energies determined by XPS. Four groups of oxide glasses have been established: glasses formed by two glass-forming acidic oxides; glasses formed by glass-forming acidic oxide and modifier's basic oxide; glasses formed by glass-forming acidic and conditional glass-forming basic oxide; glasses formed by two basic oxides. The role of electronic ion polarizability in chemical bonding of oxide glasses has been also estimated. Good agreement has been found with the previous results concerning classification of simple oxides. The results obtained probably provide good basis for prediction of type of bonding in oxide glasses on the basis of refractive index as well as for prediction of new nonlinear optical materials.     

Doped Sol-Gel Films for Silica-on-Silicon Photonic Components

Further expansion of optical communication systems depends strongly on the development of cheap component technologies for functions such as switching, demultiplexing and amplification. Silica-on-silicon is increasingly recognised as the best approach to low cost integrated optics for such applications, but so far the functionality is limited. The purpose of NODES, a basic research collaboration sponsored by the European Union under the programme ESPRIT, has been to examine the application of sol-gel to a highly functional silica-on-silicon technology. In particular, the project has investigated film processing and characterisation, rare-earth doping for amplification, and semiconductor nanocrystallite doping for nonlinear functions. This paper presents the background and context to this work, summarises the technical results obtained, and discusses requirements and challenges for successful application of sol-gel in photonics.     

纳米晶掺钇硬质合金粉末的制备

采用高能球磨法制备了纳米晶掺Y硬质合金粉末。用XRD，SEM和DTA等分析检测手段，研究了纳米晶掺Y硬质合金粉末的结构、形貌和相的变化。结果表明：高能球磨45h，可获得晶粒尺寸约为8nm的掺Y硬质合金粉末；微量Y的加入，有利于硬质合金粉末晶粒的细化；在25～45h范围内，随着高能球磨时间的延长，粉末晶粒尺寸减小，且掺Y硬质合金粉末的晶粒尺寸比未掺Y的硬质合金粉末晶粒尺寸要细一倍；高能球磨25h，粉末中Co的X射线衍射峰消失。高能球磨掺Y硬质合金粉末的DTA曲线在626℃出现了1个尖锐的放热峰。高能球磨掺Y硬质合金粉末固结之后，其合金晶粒细小，机械性能较好。