高锰酸盐指数的灰色GM(1,1)预测

以中山市岐江河近7年的高锰酸盐指数监测数据为基础，采用灰色系统理论中的预测方法，建立了岐江河高锰酸盐指数的灰色预测模型。用该模型预测岐江河2006年、2007年、2008年高锰酸盐指数的值分别为5．3，5．4和5．4。     

Substituent effects in trans‐p,p′‐disubstituted azobenzenes: X‐ray structures at 100 K and DFT‐calculated structures

The crystal and molecular structures of two para‐substituted azobenzenes with π‐electron‐donating –NEt₂ and π‐electron‐withdrawing –COOEt groups are reported, along with the effects of the substituents on the aromaticity of the benzene ring. The deformation of the aromatic ring around the –NEt₂ group in N,N,N′,N′‐tetraethyl‐4,4′‐(diazenediyl)dianiline, C₂₀H₂₈N₄, (I), may be caused by steric hindrance and the π‐electron‐donating effects of the amine group. In this structure, one of the amine N atoms demonstrates clear sp²‐hybridization and the other is slightly shifted from the plane of the surrounding atoms. The molecule of the second azobenzene, diethyl 4,4′‐(diazenediyl)dibenzoate, C₁₈H₁₈N₂O₄, (II), lies on a crystallographic inversion centre. Its geometry is normal and comparable with homologous compounds. Density functional theory (DFT) calculations were performed to analyse the changes in the geometry of the studied compounds in the crystalline state and for the isolated molecules. The most significant changes are observed in the values of the N=N—C—C torsion angles, which for the isolated molecules are close to 0.0°. The HOMA (harmonic oscillator model of aromaticity) index, calculated for the benzene ring, demonstrates a slight decrease of the aromaticity in (I) and no substantial changes in (II).     

Using NaCl particles as porogen to prepare a highly adsorbent chitosan membranes

Macroporous chitosan membranes were prepared by using NaCl particles porogen and genipin as cross-linking agent. For characterization and sorption behavior comparison, other genipin cross-linked chitosan membranes were prepared by either freeze drying or by using silica particles as porogen. The mean pore diameter, the porosity, the crystallinity index (CrI) as well as the effect of the drying procedures of these chitosan membranes were examined. NaCl reduced the CrI of the chitosan membrane. The oven drying (OD) procedure decreased the mean pore diameter, the porosity, and increased the CrI of the chitosan membranes when compared with the vacuum drying (VD) procedure. The heat treatment of chitosan membrane in aqueous NaOH to attract silica porogen increased the CrI of the membrane. Under the same conditions, the membranes prepared with NaCl had better sorption performance on RR 189 and Cu²⁺ than other membranes. The maximum sorption capacity (q_e) reached 1836.17 mg RR 189/g chitosan and 151.98 mg Cu²⁺/g chitosan. The pore diameter (d_pore) of the membranes was much larger than the diameter of the adsorbate molecules (d_adsorbate), such that the ratio of d_pore/d_adsorbate had little influence on q_e. The porosity and the amorphous extent of the membranes were almost the same on q_e. When using tyrosinase catalyzing, the hydrocaffeic acid (HCA) grafted on the NaCl treated chitosan membrane was almost 10 times more than on chitosan beads. The chitosan membrane prepared with NaCl can be used as a good adsorbent with high loading capacity for implanting molecules (such as ligands, enzymes, etc.) on.     

电拓扑状态预测有机磷酸酯类化合物的气相色谱保留指数

以原子类型电拓扑状态指数(ETSI)有效表征35个有机磷酸酯类化合物(OP)的分子结构, 应用基于预测的变量选择与模型化(VSMP)方法建立OP化合物在3种不同固定相上的气相色谱保留指数(RI)与分子结构(ETSI)的定量相关模型. 结果表明, 影响不同固定相上OP色谱保留的主要结构因素都是由7个ETSI描述子对应的子结构碎片, 即: ＝CH₂,≡C—, aaC—, ＝O, —O—, Cl和Br. 其中子结构aaC—, ＝O和—O与OP化合物母体骨架密切相关, 而＝CH₂,≡C—, —Cl和—Br反映支链或取代基的变化. 通过多元线性回归法建立OP化合物在三个固定相上的定量结构-保留相关模型(QSRR)发现, 各QSAR模型的估计相关系数均在0.99以上, LOO检验相关系数在0.98以上, 表明模型具有良好估计能力与稳定性. 应用28个OP训练集样本构建的QSRR模型预测外部7个检验集RI结果表明训练集模型具有良好预测能力.     

Free aluminium extraction from various reference materials and acid soils with relation to plant availability

The single extractions with 15 extractants (agents) (H₂O, KCl, NH₄Cl, NH₄F, CaCl₂, BaCl₂, CuCl₂, LaCl₃, Na₂S₂O₄, (NH₄)₂C₂O₄, Na₄P₂O₇, NTA, EDTA, DTPA, HCl), the optimised BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and the solid phase extraction (SPE) by the chelating ion-exchanger Iontosorb Salicyl (cellulose resin containing covalently bound salicylic acid functional groups) were used for the partitioning of Al in very acid soil samples taken from an area influenced by acid mine solutions. The precision, accuracy and repeatibility for all steps of the optimised BCR SEP were checked on the various reference materials (CRM 483 sewage sludge amended soil, CRM BCR 701 freshwater sediment, SRM 2710 and SRM 2711 Montana soils). Also the new indicative values of the optimised BCR SEP fractional Al concentrations were obtained for these reference materials. The aluminium amounts obtained by the used extraction procedures were valuated and discussed from the aspect of the Al concentration in the plants (grass) growing on the same studied soils. The aluminium toxicity indexes (ATI) calculated for the studied soils, the BaCl₂ and acetic acid soil extracts and the grass stems and roots were used for the assessment of the Al toxicity to the plants. The ATI value was defined as the ratio of the nutrient cations (Ca, Mg, K, Na) concentration sum to the Al concentration. The flame atomic absorption spectrometry (LOQ = 0.2 mg l⁻¹) and the inductively coupled plasma optical emission spectrometry (LOQ = 0.03 mg l⁻¹) were used for the aluminium quantification.     

FTIR and WAXS analysis of periodate oxycellulose: Evidence for a cluster mechanism of oxidation

Cellulose paper (Whatman no.1, chromatographic grade) was oxidised with 0.1 M sodium metaperiodate at different oxidation levels (0–11 days at room temperature), and analysed with FTIR before and after chemical treatments (reduction, further oxidation, alkaline hydrolysis). The deconvolution of infrared data allowed us to verify that periodate oxidises cellulose in isolated domains, leading to the decrease of crystallinity, in agreement with the results of wide angle X-ray scattering (WAXS). In particular, the alkaline hydrolysis (β-alkoxy fragmentation) followed by mild acid treatment removed the oxidised groups and recovered most of the crystallinity of cellulose, as determined by the FTIR crystallinity index.     

Influence of extractions on physicochemical characterization and bioactivity of Piper nigrum oils: Study on the non-isothermal decomposition kinetic

Black pepper oils have been investigated frequently in the recent years. However, there is a significant variation in physicochemical properties and bioactivity of oils depended on extraction techniques. In this study, the systemic investigation of four various extraction methods was performed to evaluate the physicochemical characterizations, antioxidant and antibacterial activity. The investigation of ¹H NMR, FTIR and UV–Vis spectra confirmed presence of non-volatile components in oils extracted through supercritical CO₂ and hexane-soaking extractions which induced their typical thermal properties. The isothermal behaviour of extracted oils related to evaporation was within range of 3.2–7.3% (w/w) at 27 °C. The SEM images of the black pepper confirmed different operation manners of mechanism between extractions using the solvents and heating process. The lowest MIC for both essential oils from conventional hidrodistillation and microwave-assisted hidrodistillation against two bacteria including E. coli and B. subtilis were found to be 137 µg mL⁻¹. The non-isothermal decomposition kinetics were investigated on the essential oil of microwave-assisted hydrodistillation extraction. The activation energies and pre-exponent factors of non-isothermal decomposition were found to be in range of 36.5–73.7 KJ mol⁻¹ and 4.98 × 10³–1.97 × 10⁸ s⁻¹, respectively, dependent on conversional fractions of the oil. The results revealed that chemical components, physicochemical properties and bioactivity of black pepper essential oils depended on the extraction techniques.     

Application of a retention database to the identification of individual polychlorinated biphenyl congeners in Aroclors mixture using selected polychlorinated biphenyls as a reference series

The database of the relative retention times (RRTs) of polychlorinated biphenyls (PCBs) reported in literature was used to calculate the retention indices (RIs) of all 209 PCB congeners on temperature programmed capillary column Rtx-5. Calculation of retention indices was based on reference series of seven congeners (PCB IUPAC Nos. 18, 52, 101, 143, 185, 203 and 206) that exhibit linear relative retention time behaviour as a function of chlorine number. The calculated indices were compared to those determined in our laboratory as well as to those obtained by other authors. The proposed indices system was applied for identification individual congeners in mixture of Aroclors 1242:1254:1260, using only reference series of PCBs.     

Classification of oxide glasses: A polarizability approach

A classification of binary oxide glasses has been proposed taking into account the values obtained on their refractive index-based oxide ion polarizability α_O2−(n₀), optical basicity Λ(n₀), metallization criterion M(n₀), interaction parameter A(n₀), and ion's effective charges as well as O1s and metal binding energies determined by XPS. Four groups of oxide glasses have been established: glasses formed by two glass-forming acidic oxides; glasses formed by glass-forming acidic oxide and modifier's basic oxide; glasses formed by glass-forming acidic and conditional glass-forming basic oxide; glasses formed by two basic oxides. The role of electronic ion polarizability in chemical bonding of oxide glasses has been also estimated. Good agreement has been found with the previous results concerning classification of simple oxides. The results obtained probably provide good basis for prediction of type of bonding in oxide glasses on the basis of refractive index as well as for prediction of new nonlinear optical materials.