Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

A hybrid genetic algorithm-heuristic for a two-dimensional orthogonal packing problem

In this paper we address a two-dimensional (2D) orthogonal packing problem, where a fixed set of small rectangles has to be placed on a larger stock rectangle in such a way that the amount of trim loss is minimized. The algorithm we propose hybridizes a placement procedure with a genetic algorithm based on random keys. The approach is tested on a set of instances taken from the literature and compared with other approaches. The computation results validate the quality of the solutions and the effectiveness of the proposed algorithm.     

An improved linearization strategy for zero-one quadratic programming problems

We present a new linearized model for the zero-one quadratic programming problem, whose size is linear in terms of the number of variables in the original nonlinear problem. Our derivation yields three alternative reformulations, each varying in model size and tightness. We show that our models are at least as tight as the one recently proposed in [7], and examine the theoretical relationship of our models to a standard linearization of the zero-one quadratic programming problem. Finally, we demonstrate the efficacy of solving each of these models on a set of randomly generated test instances.     

超模的同构定理

本文利用模论导出超模的三个同构定理,同时,给出超模的Jordan-Holder定理,最后,探讨了超模的基本关系∈~*,并研究其性质．     

Hopf代数上的扭曲模和(斜)余配对Hopf模

本文第一部分主要把扭曲的方法运用到模上,从而得到扭曲模．作为特例,我们构造了H  M的Smaush模和量子模．当K是有限维Hopf代数,证明K*  M是一个右D(K)-Hopf模,因此得到了一个基本同构定理．第二部分主要把斜余配对双代数进行推广,得到了斜余配对Hopf模,并且给出判断斜余配对Hopf模的一个充要条件．     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

黄芪成分F3新制剂的工艺监测

对黄芪成分F3新制剂中多糖、蛋白质进行了工艺监测，多糖提取达99．2％，蛋白质≤0．2％，符合黄芪成分F3的质量标准要求，达到了选择最佳提取工艺的目的，结果令人满意。     

Fluoride-assisted trifluoromethylation of aromatic thiones with (trifluoromethyl)trimethylsilane

In the presence of a stoichiometric amount of Bu₄NF·3H₂O, (trifluoromethyl)trimethylsilane reacts with aromatic thiones in both thiophilic and carbophilic ways to deliver, in medium yield, a mixture of (trifluoromethylthio)diarylmethane and 1,1-diaryl-2,2,2-trifluoroethanethiol, the former product being the major one.     

Depth profiling of latex blends of fluorinated and fluorine‐free acrylates with laser‐induced secondary mass spectrometry

We explored phase separation and self‐assembly of perfluoroalkyl segments at the surface of polymer films obtained from latices of semifluorinated acrylate copolymers and the corresponding latex blends of nonfluorinated and semifluorinated polyacrylates. With laser‐induced secondary mass spectrometry the fluorine distribution was measured after annealing above the minimum film‐forming temperature of the polymers up to a depth of several micrometers. Depth profiles of a semifluorinated acrylate homopolymer and latex blends thereof with fluorine‐free alkylacrylates with 25, 50, and 75 mol % semifluorinated acrylate as well as a copolymer comprised of alkyl acrylate and semifluorinated acrylate (50/50 mol %) were investigated. In the case of latex blends containing both semifluorinated polyacrylates and fluorine‐free or low‐fluorine polymers, self‐assembly accounted for enrichment of the perfluoroalkyl segments at the surface. Coatings exhibiting low surface energy and having a substantially reduced total fluorine content were obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 360–367, 2003     

On the Exceptional Zeros of Rankin–Selberg L-Functions

The main objects of study in this article are two classes of Rankin–Selberg L-functions, namely L(s,f×g) and L(s, sym²(g)× sym²(g)), where f,g are newforms, holomorphic or of Maass type, on the upper half plane, and sym²(g) denotes the symmetric square lift of g to GL(3). We prove that in general, i.e., when these L-functions are not divisible by L-functions of quadratic characters (such divisibility happening rarely), they do not admit any LandauSiegel zeros. Such zeros, which are real and close to s=1, are highly mysterious and are not expected to occur. There are corollaries of our result, one of them being a strong lower bound for special value at s=1, which is of interest both geometrically and analytically. One also gets this way a good bound onthe norm of sym²(g).