Decay of metastable states in Nd II

The difficulty associated with an accurate determination of transition rates for forbidden lines in lowly ionized heavy elements is illustrated in the case of Nd II. We have investigated the radiative decay of the low-lying metastable levels in Nd⁺ including the two levels K_11/2 and I_13/2. In these two particular cases, using different theoretical approaches, we find that the decay is dominated by the M1 channels but that the E2 contributions are of the same order of magnitude. These levels have also been studied experimentally by lifetime measurements with the heavy ion storage ring CRYRING of Stockholm University. The difficulties encountered when performing such experiments are underlined and discussed.     

“神龙一号”加速器束流输运系统研制

文章系统介绍了“神龙一号”直线感应加速器束流输运系统的研制过程和取得的成果, 重点阐述了螺线管线圈、二极校正线圈、多功能腔等关键单元部件的设计、传输元件的磁轴测量和准直安装、束线的总体布局、束流调试等研究内容. 束流调试结果表明, 该束流传输线的设计是成功的, 并且具有较宽的动态适应范围. 最后, 结合束流调试的经验, 提出了一些建议供以后工作参考.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4 Induced by Electron Irradiation

A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag₂MoO₄ crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag₂MoO₄ are a result of structural and electronic changes of the AgO₄ tetrahedral cluster as a constituent building block of β‐Ag₂MoO₄, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag₂MoO₄ semiconductor from n‐ to p‐type concomitant with the appearance of Ag defects.     

Large‐acceptance diamond planar refractive lenses manufactured by laser cutting

For the first time, single‐crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm‐thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam‐conditioning elements. Owing to the unsurpassed thermal properties of single‐crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth‐generation X‐ray sources.     

光阑对偏振高斯-谢尔模型光束偏振特性的影响（英文）

根据广义惠更斯-菲涅尔原理和Collins公式,基于复高斯函数展开法,推导出椭圆偏振的高斯-谢尔模型光束经过矩形光阑衍射后的交叉谱密度公式,结合斯托克斯矢量理论推导了椭圆偏振高斯-谢尔模型光束在接收平面的光强、偏振度、方位角和椭圆度的表达式,数值分析了光阑的孔径遮拦比对光强、偏振度及方位角和椭圆度的影响.结果表明,光阑的孔径遮拦比在近场区对经过光阑后椭圆偏振高斯-谢尔模型光束的光强和偏振特性有显著影响;随着传输距离的增大,光强和偏振特性受孔径遮拦比的影响减小,光强和偏振特性变化平稳.     

基于CCD对高斯光束进行实时判断及特性参数的测量

主要使用等距四点采光测量法,用CCD进行采样,电脑编程处理来判断、分析和研究高斯光束的光强在空间的分布情况——传播特性。并利用计算机可以实时判断激光器输出是否为高斯光束,如是高斯光束,还可以实验测得高斯光束的径向强度分布、束径以及扩散角。     

Observation of radially polarized terahertz radiation generated by a sub-picosecond electron beam

The fundamental property of radially polarized terahertz radiation, which is axial symmetry of the polarization state in the radial direction, was measured with a Schottky diode detector and with a terahertz camera and wire-grid linear polarizer. Radially polarized terahertz radiation was generated from coherent transition radiation using a 30-MeV sub-picosecond electron beam. Bow-tie intensity distributions, aligned along the polarization direction, were clearly observed with the terahertz camera and could be rotated by changing the direction of the linear polarizer. The measured intensity distribution agreed with the calculated value. A video of the data can be found online.     

The influence of Au-nanoparticles presence in PDMS on microstructures creation by ion beam lithography

3D microstructures in pure poly(dimethylsiloxane) (PDMS) and PDMS with embedded Au nanoparticles were prepared by ion beam lithography without any further etching. Two mega-electron volts helium and 10 MeV oxygen ions were used for ion microstructuring. Parallel lines of 1 mm in length and 10 μm in thickness were fabricated for investigation of the effect of the nanoparticles presence in the polymer on the surface morphology of the created microstructures. The created microstructures were checked by optical microscope. Infrared (IR) spectrometry was used to study the effect of the ions type and fluence on the chemical changes of the material. Atomic force microscopy was used for the fine detail study as well as for checking the microstructure quality. Analysis revealed an increased radiation resistance of the nanocomposite compared to the pure PDMS. Shrinkage is proportional to the fluence, but the maximum value for both materials is limited by saturation. 3D microstructure in modified PDMS obtained at the same irradiation condition as pure PDMS is characterized by its smaller height. Obtaining the microstructure in nanocomposite of the same height as in pure PDMS by increasing the fluence can be impossible due to saturation of shrinkage and/or radiation-induced heating of the material.