线型光束可燃气体探测器的校准

介绍线型光束可燃气体探测器的的校准方法。对线型光束可燃气体探测器的示值误差、报警功能、响应时间、光强衰减性能和抗日光干扰性能等主要计量特性及技术指标进行校准,给出了各主要计量特性的校准条件、试验设备和具体校准方法。对两台线型光束可燃气体探测器进行了校准,其示值误差用相对误差表示分别为–5%和4%,用引用误差表示分别为–4%FS和3%FS。经验证,上述结果均未超出设定指标,响应时间等其它主要计量特性也符合方法要求。该方法校准后的计量特性及技术指标较为合理,校准方法切实可行,可以用于线型光束可燃气体探测器的校准。     

Dispersion and localisation in structured Rayleigh beams

This paper brings a comparative analysis between dynamic models of couple-stress elastic materials and structured Rayleigh beams on a Winkler foundation. Although physical phenomena have different physical origins, the underlying equations appear to be similar, and hence mathematical models have a lot in common. In the present work, our main focus is on the analysis of dispersive waves, band-gaps and localised waveforms in structured Rayleigh beams. The Rayleigh beam theory includes the effects of rotational inertia which are neglected in the Euler–Bernoulli beam theory. This makes the approach applicable to higher frequency regimes. Special attention is given to waves in pre-stressed Rayleigh beams on elastic foundations.     

A combined crossed molecular beam and quasiclassical trajectory study of the Titan-relevant N(2D) + D2O reaction

Following a recent investigation on the N(²D) + H₂O reaction [Homayoon et al., J. Phys. Chem. Lett. 5, 3508 (2014)], we report on an experimental and theoretical study of the isotopologue N(²D) + D₂O reaction. Crossed molecular beam (CMB) experiments were conducted at a collision energy of 10.3 kcal mol^–1. Quasiclassical trajectory calculations were performed on a recent potential energy surface to derive the centre-of-mass functions necessary to simulate the CMB laboratory distributions. Excellent agreement was found. The importance of the channel leading to HON/DON was confirmed. The inclusion of this channel, in addition to that leading to the isomer HNO/DNO, can affect the models considering the coupling between nitrogen and oxygen chemistry in the upper atmosphere of Titan.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

Long‐time behavior of a nonlinear viscoelastic beam equation with past history

This paper is concerned with the existence of a global attractor for the nonlinear viscoelastic beam equation with past history memory where g(u_t) is a damping like | u_t | ^ru_t and f(u) is a source term like | u | ^αu ? | u | ^βu, by considering 0 ≤ β < α and r > 0. Copyright © 2014 John Wiley & Sons, Ltd.     

Unveiling the correlation between non‐diffracting tractor beam and its singularity in Poynting vector

This paper investigates the singular optics of nonparaxial light beams in the near field when the light behaves as a tractor beam. New insights into the optical pulling force, which is usually represented by integrating the stress tensor at a black box enclosing the object, are interpreted by the optical singularity of the Poynting vector. The negative nonconservative pulling force originates from the transfer of the azimuthal Poynting vector to the longitudinal component partly owing to the presence of a scatterer. The separatrice pattern and singularity shifts of the Poynting vector unanimously exhibit a differentiable near‐field distribution in the presence of optical pulling force. A new method is established to calculate the near‐field optical force using the differential Poynting vector in the far field. The results obtained provide a clear physical interpretation of the light–matter interaction and manifest the significance of singular optics in manipulating objects.

     

Interpretation of TOF-SIMS data based on information entropy of spectra

Time-of-flight secondary ion mass spectrometry (TOF-SIMS), when used for the analysis of complex material samples, typically provides data that are complicated and challenging to understand. Therefore, additional data analysis techniques, such as multivariate analysis, are often required to facilitate the interpretation of TOF-SIMS data. In this study, a new method based on the information entropy (Shannon entropy) is proposed as an indicator of the outline characteristics of an unknown sample, such as changes in the material within the sample and mixing conditions. The Shannon entropy values are calculated using the relative intensity of every secondary ion normalized to the total ion count and reflect the diversity of secondary ions in the spectrum. Mixed samples containing two organic electroluminescence materials of different ratios, multilayers of Irganox 1010, and other organic materials were employed to evaluate the utility of Shannon entropy in the analysis of TOF-SIMS data. The findings demonstrate that the Shannon entropy of a spectrum indicates differences in materials and changes in the conditions of a material in a sample without the need for peak identification or the knowledge of specific peaks corresponding to the materials in the sample.     

不同磁路电子回旋共振离子源引出实验

空间推进所用的电子回旋共振离子源(ECRIS)应具有体积小、效率高的特点. 本文研究的ECRIS使用永磁体环产生磁场, 有效减小了体积, 该离子源利用微波在磁场中加热电子, 电子与中性气体发生电离碰撞产生等离子体. 磁场在微波加热电子的过程中起关键作用, 同时影响离子源内等离子体的约束和输运. 通过比较四种磁路结构离子源的离子电流引出特性来研究磁场对10 cm ECRIS性能的影响. 实验发现: 在使用氩气的条件下, 特定结构的离子源可引出160 mA的离子电流, 最高推进剂利用率达60%, 最小放电损耗为120 W·A^-1; 所有离子源均存在多个工作状态, 工作状态在微波功率、气体流量、引出电压变化时会发生突变. 离子源发生状态突变时的微波功率、气体流量的大小与离子源内磁体的位置有关. 通过比较不同离子源的引出离子束流、放电损耗、气体利用率、工作稳定性的差异, 归纳了磁场结构对此种ECRIS引出特性的影响规律, 分析了其中的机理. 实验结果表明: 保持输入微波功率、气体流量、引出电压不变时, 增大共振区的范围、减小共振区到栅极的距离, 离子源能引出更大的离子电流; 减小共振区到微波功率入口、气体入口的距离能降低维持离子源高状态所需的最小微波功率和最小气体流量, 提高气体利用率, 但会导致放电损耗增大. 研究结果有助于深化对此类离子源工作过程的认识, 为其设计和性能优化提供参考.     

Effect of thickness on physical properties of electron beam vacuum evaporated CdZnTe thin films for tandem solar cells

The thickness and physical properties of electron beam vacuum evaporated CdZnTe thin films have been optimized in the present work. The films of thickness 300 nm and 400 nm were deposited on ITO coated glass substrates and subjected to different characterization tools like X-ray diffraction (XRD), UV‐Vis spectrophotometer, source meter and scanning electron microscopy (SEM) to investigate the structural, optical, electrical and surface morphological properties respectively. The XRD results show that the as-deposited CdZnTe thin films have zinc blende cubic structure and polycrystalline in nature with preferred orientation (111). Different structural parameters are also evaluated and discussed. The optical study reveals that the optical transition is found to be direct and energy band gap is decreased for higher thickness. The transmittance is found to increase with thickness and red shift observed which is suitable for CdZnTe films as an absorber layer in tandem solar cells. The current-voltage characteristics of deposited films show linear behavior in both forward and reverse directions as well as the conductivity is increased for higher film thickness. The SEM studies show that the as-deposited CdZnTe thin films are found to be homogeneous, uniform, small circle-shaped grains and free from crystal defects. The experimental results confirm that the film thickness plays an important role to optimize the physical properties of CdZnTe thin films for tandem solar cell applications as an absorber layer.