解吸附电晕束电离质谱法快速检测中成药及保健食品中非法添加的β-受体阻滞剂

建立了新型的解吸附电晕束离子源耦合离子阱质谱法(DCBI-MS),在无需复杂的样品前处理及色谱分离的条件下,可快速检测降血压中成药及保健食品中非法添加的7种β-受体阻滞剂阿替洛尔、比索洛尔、美托洛尔、普萘洛尔、盐酸塞利洛尔、盐酸贝凡洛尔和卡维地洛.采用一级质谱快速筛选和二级质谱确证的方法对目标化合物进行了定性和半定量测定.各目标物的检出限均低于0.1 mg/L,在0.5～100 mg/L浓度范围内线性关系良好.实验获得的7种β-受体阻滞剂的裂解规律为芳氧丙醇胺类化合物的质谱检测提供了参考依据.通过与高效液相色谱-电喷雾离子化质谱法(HPLC-ESI/MS)对比表明,DCBI-MS方法的检测结果可靠.对9种市售样品进行检测,有1批次中成药检出含有未标示的卡维地洛.结果表明,DCBI-MS法测定单个样品的时间不超过1 min,分析速度快,可以在大批量复杂基质样品中β-受体阻滞剂的筛查和药品品质的在线监测中发挥重要作用.     

Structural investigation of high‐transmittance aluminum oxynitride films deposited by ion beam sputtering

Aluminum oxynitride films were deposited by ion beam sputtering technique at room temperature. The optical properties and morphologies of the aluminum oxynitride films were studied and reported previously. It was found that the optical properties are closely related to the O contents in the films. In this study, the structures of the films were investigated by X‐ray diffractometer and XPS. Three oxidation states of N_1s in oxynitride films, N⁺, N²⁺ and N³⁺, were clearly deduced from N_1s spectra in the amorphous films fabricated under various oxygen partial pressures (P_O2). To our knowledge, three oxidation states of N_1s have not been simultaneously observed and reported in the aluminum oxynitride films previously. Corresponding bonding variations in Al_2p and O_1s spectra indicated more oxygen in oxynitride in the film as P_O2 increases. Three aluminum oxynitride networks, AlO₂N, AlO_2.5N and AlO₃N were deduced. Optical properties of aluminum oxynitride films resemble those of AlN and Al₂O₃ films when P_O2 is low and high during the deposition. The refractive indices and extinction coefficients of the aluminum oxynitride films can be adjusted by using proper P_O2 during the film depositions. Copyright © 2010 John Wiley & Sons, Ltd.     

Solid State Analysis with the New Leipzig High-Energy Ion Nanoprobe

 The high-energy ion nanoprobe LIPSION at the University of Leipzig has been operational since October 1998. The ultrastable single ended 3.5 MV SINLETRON^TM accelerator supplies the H⁺ or He⁺ ion beam. A magnetic scanning system moves the focused beam across the sample. At present, a resolution of 150 nm in the low current mode and 300 nm at 5 pA could be achieved. The UHV grade experimental chamber is equipped with electron-, energy dispersive X-ray-, and particle detectors. They can be used simultaneously to analyse the sample by means of PIXE (particle induced X-ray emission), RBS (Rutherford backscattering) and in the case of thin samples STIM (scanning transmission ion microscopy). A goniometer allows the application of channeling measurements in single crystals in combination with these methods. The detection limits depend on the elements to be analysed and range from (1000⋯1) μg/g relative and (1⋯0.01) pg absolute. The analysis is nondestructive, but the sample has to be vacuum resistant. Applications of the nanoprobe in the field of semiconductor research, biomedicine, and archaeology will be described.     

Development of positron annihilation spectroscopy to test accelerated weathering of protective polymer coatings

A variable mono-energetic positron beam with a computer-controlled system has recently been constructed at the University of Missouri–Kansas City for weathering studies of polymeric coatings. The beam is designed to measure the S-parameter from Doppler-broadening energy spectra and the sub-nanometer defect properties from positron annihilation lifetimes (PAL). Significant variations of S-parameter and ortho-positronium intensity in coatings, as obtained from the newly built beam and from the Electrotechnical Laboratory’s beam, respectively, are observed as a function of depth and exposure time due to the Xe-light irradiation. A high sensitivity of positron annihilation signal response to the early stage of degradation is observed. Development of positron annihilation spectroscopy to test accelerated weathering of polymeric coatings is discussed.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Formation of artificial micro‐pits on Al alloy with the photon rupture method and the localized corrosion behavior of the formed pits

An in situ artificial micro‐pit fabrication method with an area selective electrochemical measurement technique was applied to investigate the effect of the geometry of artificially formed pits on their localized corrosion behavior in anodized 1000 series aluminum. This technique enables the fabrication of artificial micro‐pits with different aspect ratios (pit depth/pit diameter) in solutions. The aspect ratios of the fabricated artificial micro‐pits in this experiment could be varied from 0.13 to 1.83 by controlling the irradiation time of the focused pulsed YAG laser beam. By applying a constant potential to the final laser‐beam‐irradiated spot in chloride environments, localized dissolution occurred only at the laser beam irradiated area, because the anodic oxide film acted as an insulator. The corrosion current and charge increase with increasing aspect ratio at any applied potential. Copyright © 2010 John Wiley & Sons, Ltd.     

Electron Beam‐Based Functionalization of Poly(ethersulfone) Membranes

Poly(ethersulfone) membranes were surface modified in a one‐step procedure. For this purpose, the membranes were soaked with aqueous solutions of different low‐molecular weight molecules bearing diverse hydrophilic functionalities and subject to electron beam treatment. No catalysts, photoinitiators, organic solvents or other toxic reagents were used, and no additional synthetic or purification steps were required.

     

100-femtosecond MeV electron source for ultrafast electron diffraction

A near-relativistic 100-fs MeV electron beam is developed by using a photocathode rf gun for revealing the hidden ultrafast dynamics of intricate molecular and atomic processes in materials through experimentation of ultrafast time-resolved electron diffraction (UED). The transverse and longitudinal dynamics of femtosecond electron beam in the rf gun were studied theoretically by particle simulation. The growths of the emittance, bunch length and energy spread due to the rf and space charge effects were investigated by changing the laser parameters, field gradient and electron charge. The theoretical studies indicate that a 100-fs MeV electron beam with the transverse emittance of 0.1 mm mrad and the relative energy spread of 10⁻³–10⁻⁴ at bunch charge of 0.1–2 pC (10⁶–10⁷ electrons per pulse) is achievable for UED, in which the intensity is three orders of magnitude higher than that produced by the conventional dc or pulsed guns.     

Ion-beam irradiation effects on polyimide-UV–vis and infrared spectroscopic study

Ion-beam irradiation effects on polyimide, Kapton™, were studied with respect to optical and electronic properties. Stack films of Kapton™ (12.5 μm thick) were irradiated to various ion beams in air or vacuo at room temperature and subjected to ultraviolet–visible (UV–vis) spectroscopy, and change in absorbance and energy gap is discussed. The UV–vis absorption spectrum, which is assigned to the transition of electrons in benzene rings from π to π* orbital, upon He²⁺ (6 MeV/u) irradiation in air, shifted towards longer wavelength direction for all cases, and the shift was more obvious for higher linear energy transfer (LET) ion beams. The energy gap of the transition was estimated, and the H⁺ and He²⁺ ion beams caused little change in the transition energy gap Eg, while the heavier ions such as C⁶⁺ and Si¹⁴⁺ caused more significant decrease. This decrease is assumed to the structural changes around benzene rings, and the infrared spectroscopy revealed breakage in imide groups next to benzene ring in the repeating unit of polyimide.     

应用射线束制备可见光响应的TiO2薄膜

 由溶胶-凝胶法制备了TiO2薄膜. 为了改善TiO2对光的利用效率,采用过渡金属离子(V+和Cr+)注入和电子束辐照沉积贵金属纳米颗粒(Ag和Pt)两种射线束技术对TiO2薄膜进行改性. 紫外-可见光谱表明,两种射线束技术改性的TiO2薄膜的吸收光谱都发生了红移,说明这两种方法都是拓展TiO2吸收光谱的有效手段. 通过光催化降解甲基橙实验,比较了两种方法对TiO2可见光光催化能力的拓展情况,结果表明,两种方法均可显著提高TiO2在可见光作用下的光催化活性.