Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

Headspace Solid-phase Microextraction–Gas Chromatographic–Mass Spectrometric Analysis of the Essential Oils of Two Traditional Chinese Medicines, Angelica pubescens and Angelica sinensis

Angelica pubescens and Angelica sinensis belong to the Umbelliferae family and both are used as traditional Chinese medicines. In the present study, headspace solid-phase microextraction (HS-SPME) with gas chromatography-mass spectrometry (GC-MS) was used for the analysis of the volatile constituents present in their roots. Eighty-seven compounds in Angelica pubescens and thirty-six compounds in Angelica sinensis were identified by GC-MS. Their relative contents were calculated by the peak area ratio. HS-SPME was compared to steam distillation (SD) by analyzing the volatile constituents of Angelica sinensis root. A good agreement between results obtained with both techniques was found. As a conclusion, HS-SPME is a powerful tool for determining the volatile constituents present in the TCMs.     

Synthesis of Some Allyl-β-Cyclodextrin Derivatives and their Properties as Capillary GC Stationary Phases

Summary Three -Cyclodextrin derivatives (-CDs) were synthesized by substituting the 2,6-OH groups of -CD with allyl groups and the 3-OH groups with three different acyl groups (valeryl, heptanonyl, octanoyl). The chromatographic properties of these -CDs as stationary phases for capillary gas chromatography (CGC) were studied. The test results showed that the three -CDs possessed good coating properties and that the capillary columns coated with them exhibited high column efficiency. These -CDs can separate not only the disubstituted benzene isomers but also some racemic compounds.     

Investigation of gas chromatographic interaction mechanism on permethylated cyclodextrins by molecular modelling

Summary The capillary gas chromatographic retention behavior of -pinene and tricyclene has been investigated on stationary phases of different polarities. On all but one of the columns employed, tricyclene eluted before -pinene; only permethylated -cyclodextrins dissolved in moderately polar polisiloxanes gave a reversed elution order. The intermolecular interactions which caused the unexpected retention behavior were investigated in detail, applying methods of computer simulation. To achieve this, we have developed a calculation algorithm on the basis of molecular mechanical optimizations and programmed it in a macro. This makes it possible to systematically investigate a given configuration space in which all the possible interactions can take place. It was shown that permethylated -cyclodextrin as host molecule for both guest molecules offers an optimum cavity size. As a result the number of energetically favorable contacts between host and guest molecules as well as the strength of the interactions in this stationary phase were larger. As a consequence the elution order, normally only influenced by the vapor pressure of the compounds at a given temperature, was changed. Nonspecific interactions played an especially important role for these kinds of substances.     

Structural determination of carvone, a component of spearmint, by means of gas electron diffraction augmented by theoretical calculations

The molecular structure and conformation of carvone, a compound with a minty odor, were investigated by means of gas electron diffraction supported by theoretical calculations. Electron diffraction patterns were recorded by heating the nozzle up to 128 °C to obtain enough scattering intensity. The infrared spectrum was also measured by using an absorption cell with a path length of 10 m. The obtained molecular scattering intensities were analyzed with the aid of theoretical calculations and infrared spectroscopy. It was revealed that the experimental data are well reproduced by assuming that carvone consists of a mixture of three conformers that have the isopropenyl group in the equatorial position and mutually differ in the torsional angle around the single bond connecting the ring and the isopropenyl group. It was also found that the puckering amplitude of the ring of carvone is close to those of menthol and isomenthol, a minty compound and its nonminty isomer. The determined structural parameters (r_g and ∠_α) of the most abundant conformer of carvone are as follows: 〈r(C-C)〉=1.520(3) Å; 〈r(CC)〉=1.360(5) Å; r(CO)=1.225(5) Å; 〈r(C-H)〉=1.104(4)Å; 〈∠CC-C〉=121.1(5)°; 〈∠C-C-C〉=110.4(5)°; ∠C-CO-C=117.1(14)°; 〈∠C-C-H〉=111.1(13)°. Angle brackets denote average values and parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

Determination of Organochlorine Pesticides in Sediments from Authie Bay Using Microwave Assisted Solvent Extraction

The aim of this study was to develop an analytical method to determine the organochlorine concentrations in sediments. Combination of Microwave assisted Solvent Extraction (MASE) and capillary gas chromatography with specific detection (electron capture detector) was a viable approach for the determination of pesticides in solid matrixes. In this study, MASE development was focused on the selection of a suitable extraction solvent for all the target analytes. MASE procedure was validated by comparison with conventional methods such as Soxhlet and sonication extraction. The proposed method was then applied to determine the organochlorine insecticides concentrations in samples from Authie Bay (France). Environmental water samples were analysed and five target analytes were detected in concentrations from 0.03 to 0.56 ng/g of dry sediment. These investigations showed the accumulation and the persistency of these products in sediments in spite of the fact they were banned a few decades ago.     

A new type of two-dimensional packed + capillary column GC system. I. Theory

Summary To match the need of high efficiency capillary column (plate number N₂, Plate height H₂ and carrier gas linear velocity U₂), a new high efficiency packed column (N₁, H₁ and U₁) at high carrier gas velocity with small capacity factor has been developed in the light of theoretical discussion of factors effecting the column efficiency utilization ratio.     

Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).