Two-spin-majority cellular automaton as a model of 2D cluster and interface growth

A new probabilistic cellular automaton model is introduced to simulate cluster and interface growth in two dimensions. The dynamics of this model is an extension to higher dimensions of the compact directed percolation studied by Essam. Numerical results indicate that the two-dimensional cluster coarsening and growth can be described only approximately by the conventional cluster size scaling due to a crossover in the growth mode. The spreading of the initially flat interface follows a purely diffusional,t ^1/2, law.     

气体放电击穿过程的物理和数值研究

本文对低气压（１０＾－２Ｐａ）热阴极气体放电的击穿过程给出了物理描述和相应的双流体数学型，并发展了一种选择和调整未知初始条件的有效算法，可以通过伴随试射法得到对初始条件十分敏感的非线性两点边值常微分方程组的数值解，从而给出这类气体放电中击穿过程的定量描述。     

Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Recent theories of gas sorption in polymers

Theories and models are presented for gas sorption in polymers above and below the glass transition temperature. With the exception of predictive theories that do not represent the data well, the models are fit to data for the carbon dioxide/silicone rubber and carbon dioxide/polycarbonate systems for the purposes of comparison. During the past decade, a number of new models and theories have been proposed specifically for gas sorption in glassy polymers. Each new model attempts to incorporate aspects of the gas sorption process that are unique to polymers below the glass transition temperature. This review discusses these recent advances, the assumptions used in their development and their advantages and disadvantages.     

On estimating pressure build-up in severely accelerated,shocked flow

A new approach to the calculation of the high pressures characterizing the flow field in front of a piston undergoing severe acceleration over the short term is presented. In contrast with previous approaches where the computational domain is altered but which stop short of transforming velocities, here the problem is solved in an accelerating non-Euclidean co-ordinate system where the piston is stationary. The method is applied to a study of the problem of premature sabot separation. Through use of Harten's second-order-accurate TVD scheme, flow simulations are performed for both 1D and 3D axisymmetric geometries. The simple 1D model gives pressure profiles surprisingly close to those of the more physical 3D model.     

Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Use of a long-spacer-side-chain liquid crystalline polysiloxane containing a crown ether as a stationary phase for capillary gas chromatography

A new kind of side chain liquid crystalline polysiloxane containing a crown ether with a longer spacer (PSC-11) has been prepared and coated on a fused silica capillary column. The main chroma-tographic characteristics including efficiency, polarity, and selectivity have been examined. The phase exhibits the retention properties of both liquid crystal and crown ether stationary phases and possesses higher efficiency and better selectivity than PSC-3, which has a shorter spacer between the main polysiloxane chain and liquid crystalline side chain.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.