Determination of trichothecenes in cereals by gas chromatography with ion trap detection

Summary A method for determination of the trichothecene toxins, deoxynivalenol, 3α-acetyl-deoxynivalenol, nivalenol, T-2 toxin, HT-2 toxin and diacetoxyscirpenol in cereals (wheat, barley, oats, corn) is described. Extraction was performed according to Tanaka et al. (J. Chromatogr.328, 271 (1985)) [33], derivatization by trifluoroacylation with trifluoroacetic acid anhydride. For quantitation and confirmation a capillary gas chromatograph combined with a selective mass detector (ion trap) working in CI-mode with methanol as reagent gas was used. The quantitation limit for the complete method is 1–5 μg/kg, depending on the chemical characteristics of each toxin and cleanness of the extracts. Recoverics from spiked cereals were 78–89%.     

Enantiomeric separation of racemic sulphoxides on chiral stationary phases by gas and liquid chromatography

Summary The enantiomeric resolution of seven racemic sulphoxides on chiral stationary phases has been investigated by gas and liquid chromatography. In gas chromatography the separations were performed on octakis-(2,6-di-O-pentyl-3-O-butyryl)-γ-cyclodextrin (FS Lipodex-E) and heptakis-(2,6-di-O-methyl-3-O-pentyl)-β-cyclodextrin (DMP-β-CD). Both stationary phases were suitable for separation of the enantiomers of the sulphoxides. With one exception for each series all racemetes could be resolved on both stationary phases; FS Lipodex-E was more enantioselective than DMP-β-CD, whereas the latter seemed more generally applicable. Liquid chromatographic separations with Chiralcel-OB as stationary phase were significantly improved by optimization of mobile phase composition and temperature. Resolution factors up to R_s=6 were achieved indicating that the improved separations could now be easily used for preparative purposes.     

OH-terminated cyanopropyl silicones

Due to their high polarity and unique selectivity, cyanopropyl silicones are basic stationary phases for high resolution capillary gas chromatography. Different OH-terminated cyanopropyl silicones, containing a high cyanopropyl content, were synthesized and chromatographically evaluated. Special attention was paid to the degree of immobilization of the phases in FSOT columns. Depending on the problem at hand, a choice has to be made between immobilization and maximum selectivity.     

Application of headspace solvent microextraction to the analysis of mononitrotoluenes in waste water samples

The possibility of applying headspace solvent microextraction (HSME) for determination of mononitrotoluenes (MNTs) in waste water samples is demonstrated. A drop of n-amyl alcohol containing naphthalene as an internal standard was suspended from the tip of a microsyringe needle over the headspace of stirred sample solutions for a predescribed extraction period. The drop was then injected directly into a gas chromatograph. Optimization of experimental parameters such as the nature of extracting solvent, microdrop and sample volumes, sampling temperature, stirring rate, ionic strength of the solution, pH and extraction time on HSME efficiency were investigated. Then enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with MNTs. Finally, the method was successfully applied to the extraction and determination of the mononitrotoluenes in waste waters of both P.C.I. Company and Research Center of Azad University.     

Optimization of the Microwave-Assisted Saponification and Extraction of Organic Pollutants from Marine Biota Using Experimental Design and Artificial Neural Networks

Several improvements in sample pretreatment for the determination of organic pollutants (i.e. n-alkanes, polycyclic aromatic hydrocarbons, PAHs) in marine biota (mussels) are presented. The use of liquid nitrogen and homogenization of the samples are shown to be an alternative to the time consuming liophilization step required for the analysis of biota samples. Microwave-assisted hydrolysis and extraction are combined to isolate organic pollutants (19 n-alkanes and 27 PAHs) from biota matrices. Experimental design (ED) and artificial neural networks (ANNs) were used to optimize the experimental conditions. NIST-CRM 2978 was used to test the validity of the developed method which shows a good agreement with certified values.     

Analysis of fragrances in cosmetics by gas chromatography–mass spectrometry

A gas chromatographic (GC)-mass spectrometric (GC-MS) method has been developed for the routine analysis of 11 fragrance substances in cosmetics: cinnamic alcohol, cinnamic aldehyde, eugenol, hydroxy citronellal, α-amyl cinnamic aldehyde, geraniol, isoeugenol, coumarin, dihydrocoumarin, citronellal and citral. Methods for sample preparation of various types of cosmetic products, prior to GC analysis, have also been developed and proved to be rugged. Detection limits of all of target fragrance substances were approximately 1 ppm. Calibration curves of the target fragrance substances analyzed by GC were found to be linear in the investigated concentration range, 0.005% – 0.50%. The recoveries of the target fragrances from various types of cosmetic products were 80% – 116% and the relative standard deviations of the quantitative analysis of the target fragrance substances were within 5%.     

Determination of pyrethroid metabolites in human urine by capillary gas chromatography-mass spectrometry

Summary An analytical method for the simultaneous determination of the pyrethroid metabolites cis and trans-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropane carboxylic acid, cis 3-(2,2-dibromovinyl)-2,2-dimethylcyclopropane carboxylic acid, 3-phenoxybenzoic acid and 4-fluoro-3-phenoxybenzoic acid in human urine samples is described. The urine is subjected to acid-induced hydrolysis followed by exhaustive solvent extraction, covering both conjugated and free acids, followed by a common derivatisation step yielding the corresponding methyl esters. Quantitation was by diastereomeric, capillary gas chromatography-mass spectrometry. It appears that 4-fluoro-3-phenoxybenzoic acid is a characteristic urinary marker for cyfluthrin exposure. The limits of determination are 0.5–1.0 g L^–1 urine depending on the metabolites concerned. The applicability of the method was tested on urine samples from pest control operators exposed occupationally to cypermethrin and cyfluthrin.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Gas diffusion-flow injection determination of total inorganic carbon in water using tungsten oxide electrode

A novel gas diffusion-flow injection method has been developed for the rapid and sensitive determination of total inorganic carbon (TIC) in water. The method is based on the diffusion of CO₂ across gas permeable membrane from a donor stream containing 0.1 M HCl to an acceptor stream of sodium acetate (10⁻⁵ mol l⁻¹ and pH 10). The CO₂ trapped in the acceptor stream passes through an electrochemical flow cell contains a tungsten oxide wire and a silver/silver chloride electrode, where it was sensitively detected. The parameters affecting the sensitivity of the electrode such as buffer concentration, pH, flow rate and injected volume were studied in detail. The electrode response was linear in the concentration range from 5 to 100 μg ml⁻¹ CO₃²⁻ with a correlation coefficient (R²) of 0.998. Precision (R.S.D.) was 1.42% for 20 μg ml⁻¹ standard solution of CO₃²⁻ (n=10). The detection limit was 0.20 μg ml⁻¹ CO₃²⁻. The method was evaluated by the injection of real natural water samples and an average recovery of 100.1% was obtained. The sampling rate was 30 samples h⁻¹. The method is simple, feasible with satisfactory accuracy and precision and thus could be used for monitoring TIC in water.