[Ga6R8]2– (R = SiPh2Me): Eine metalloide Clusterverbindung mit einem unerwarteten Ga6‐Gerüst

[Ga₆R₈]^2– (R = SiPh₂Me): A Metalloid Cluster Compound with an Unexpected Ga₆‐Frame The reaction of a metastable solution of GaBr with a solution of LiSiPh₂Me in a toluene/THF mixture results in orange coloured crystals of [Ga₆(SiPh₂Me)₈]^2– · 2 [Li(THF)₄]⁺ ( 1 ). The unexpected structure of the planar Ga₆ frame (C_2h) could also be realized with the help of DFT calculation. DFT calculations furthermore show that 1 is energetically favoured against an octahedral Ga₆R₆^2– species and R₂. In contrast calculations for the similar Al and B species show that in these cases the octahedral entities are favoured. These results demonstrate that even for similar compounds of B, Al, and Ga Wade rules are too general and that they cannot predict the correct structure. Moreover the atomic arrangement within 1 shows that a structure is preferred which is also present in allotropic β‐Ga and that therefore clusters of this type should be called metalloid or more general elementoid.     

Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

镓-铬蓝黑R络合吸附波的研究及应用

在0.012mol/L HAc-0.10mol/L NaAc缓冲溶液中pH5.60,铬蓝黑R于-0.34V(vs.SCE)处有一极谱波P_1,加入Ga(Ⅲ),在-0.55V(vs.SCE)处产生一灵敏的极谱波P_2。i_p_2与Ga(Ⅲ)浓度在0.20～15.0μg/25ml范围内呈线性关系。试验表明,该极谱波属络合吸附波。本法用于测定铝箔、铅锌矿中微量镓,结果满意。     

Synthesis and characterization of organic-inorganic hybrid compounds with a pillared layer structure: Ga2(4,4′-bpy)(XO4)2 (X=P, As)

Two organic-inorganic hybrid compounds, Ga₂(4,4′-bpy)(PO₄)₂, 1, and Ga₂(4,4′-bpy)(AsO₄)₂, 2, have been synthesized under hydrothermal conditions and structurally characterized by single-crystal X-ray diffraction. The two compounds are isostructural and crystallize in the triclinic space group (No. 2) with a=4.9723(9) Å, b=5.770(1) Å, c=11.812(2) Å, α=78.268(3)°, β=89.159(3)° γ=88.344(3)°, V=331.7(2) Å³, Z=1, and R1=0.0377 for 1, and a=5.1111(7) Å, b=5.9327(8) Å, c=11.788(2) Å, α=79.497(2)°, β=88.870(2)°, γ=88.784(2)°, V=351.3(2) Å³, and R1=0.0264 for 2. The structure consists of neutral sheets of GaXO₄ (X=P or As) which are pillared through 4,4′-bipyridine ligands. Each oxide layer, which is formed only by four-membered rings, is constructed from corner-sharing GaO₄N trigonal bipyramids and XO₄ tetrahedra. The title compounds are two of the few examples in which the gallium atoms are exclusively five-coordinate.     

Dynamic Activation of Ga Sites by Pt Dopant in Low-Temperature Liquid-Metal Catalysts

Liquid GaPt catalysts with Pt concentrations as low as 1×10⁻⁴ atomic % have recently been identified as highly active for the oxidation of methanol and pyrogallol under mild reaction conditions. However, almost nothing is known about how liquid state catalysts support these significant improvements in activity. Here, ab initio molecular dynamics simulations are employed to examine GaPt catalysts in isolation and interacting with adsorbates. We find that persistent geometric features can exist in the liquid state, given the correct environment. We postulate that the Pt dopant may not be limited to direct involvement in catalysis of reactions, but rather that its presence can also enable Ga atoms to become catalytically active.     

衬钽管石墨炉原子吸收法测定痕量镓时基体改进剂的研究及应用

提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。衬钽管使镓的灵敏度提高6倍左右,钒和铜混合基体改进剂不仅能进一步提高灵敏度,而且能提高灰化温度,降低原子化温度,增强抗干扰能力。测定 GSD 标准样品中的镓时,不需对样品进行预分离即可直接进行测定,结果与参考值相符。     

Electronic structure of GaN nanotubes

Nanotube properties are strongly dependent on their structures. In this study, gallium nitride nanotubes (GaNNTs) are analyzed in armchair and zigzag conformations. The wurtzite GaN (0001) surface is used to model the nanotubes. Geometry optimization is performed at the PM7 semiempirical level, and subsequent single-point energy calculations are carried out via Hartree–Fock and B3LYP methods, using the 6-311G basis set. Semiempirical and ab initio methods are used to obtain strain energy, charge distribution, dipole moment, |HOMO-LUMO| gap energy, density of states and orbital contribution. The gap energy of the armchair structure is 3.82 eV, whereas that of the zigzag structure is 3.92 eV, in agreement with experimental data.     

New Ga/N‐based Active Lewis Pairs,Trifunctional Ga–Ga Compounds,Reactions with Cyanamide and Dual Insertion of Isocyanate

Hydrogallation of Me₃Si–C≡C–NR'₂ with R₂Ga–H (R = tBu, CH₂tBu, iBu) yielded Ga/N‐based active Lewis pairs, R₂Ga–C(SiMe₃)=C(H)–NR'₂ ( 7 ). The Ga and N atoms adopt cis‐positions at the C=C bonds and show weak Ga–N interactions. tBu₂GaH and Me₃Si–C≡C–N(C₂H₄)₂NMe afforded under exposure of daylight the trifunctional digallium(II) compound [MeN(C₂H₄)₂N](H)C=C(SiMe₃)Ga(tBu)–Ga(tBu)C(SiMe₃)=C(H)[N(C₂H₄)₂NMe] ( 8 ), which results from elimination of isobutene and H₂ and Ga–Ga bond formation. 8 was selectively obtained from the ynamine and [tBu(H)Ga–Ga(H)tBu]₂[HGatBu₂]₂. 7a (R = tBu; NR'₂ = 2,6‐Me₂NC₅H₈) and H₈C₄N–C≡N afforded the adduct tBu₂Ga‐C(SiMe₃)=C(H)(2,6‐Me₂NC₅H₈) · N≡C–NC₄H₈ ( 11 ) with the nitrile bound to gallium. The analogous ALP with harder Al atoms yielded an adduct of the nitrile dimer or oligomers of the nitrile at room temperature. The reaction of 7a with Ph–N=C=O led to the insertion of two NCO groups into the Ga–C_vinyl bond to yield a GaOCNCN heterocycle with Ga bound to O and N atoms ( 12 ).     

Determination of gallium by graphite furnace atomic absorption spectrometry with combined use of a tungsten-coated L'vov platform tube and a chemical modification technique

Tungsten-coated non-pyrolytic graphite (NPG), pyrolytic graphite (PG) and pyrolytic L'vov platform graphite (PPG) tubes were prepared, and their analytical performances were compared. The coating process simply involved injecting 100 μl of a sodium tungstate solution (0.01 mol l⁻¹) into each graphite tube, followed by heating according to a temperature programme similar to an atomisation cycle for the determination of gallium. This procedure for coating was repeated at least 12, 25, and 7 times towards NPG, PG, and PPG tubes, respectively. Among these tubes, the tungsten-coated PPG tube showed excellent performance for the determination of gallium. By combined use of a chemical modifier such as aluminium(III) or nickel(II) a detection limit (3σ) of 6 pg and sensitivity (1% absorption) of 3–4 pg were achieved. The practical potential of the proposed technique was demonstrated for the determination of gallium in several samples of alloys and fresh water.