The Modeling of Velocity Enhancement in Polymer Flooding

In single-phase polymer flooding experiments it has repeatedly been observed that the average velocity of the polymer molecules is higher than the average velocity of the water molecules. This effect is incorporated in many conventional Enhanced Oil Recovery (EOR) simulators by the introduction of a constant velocity enhancement factor. In this paper we show that, in absence of dispersion, a constant enhancement factor in the mathematical model for two-phase polymer flow (Buckley--Leverett displacement) leads to ill-posedness of the model equations. We propose a saturation dependent enhancement factor, derived from a model based on percolation concepts, for which this problem does not occur.     

基于正弦灰度变换的X光图像增强

介绍了灰度变换法的几种形式 ,提出了一种正弦非线性变换法 ,对三幅数字X光医学图像进行了处理 ,获得了令人满意的对比度增强效果 ,证明该方法有效而实用     

Optimization of the synthesis of non-symmetrical alkyl dimethyl sulfonium halides

This work is aimed at the optimization of the yield and purity of non-symmetrical trialkyl sulfonium halide salts. The effects of parameters such as solvent, temperature and concentration were studied. The products were carefully analyzed and the crystal structure of [{n-CH₃(CH₂)₁₅}(CH₃)₂S]Br determined. The overall aim of the present study is future syntheses of low-dimensional magnetic materials.     

Spectral enhancement of Polish vowels to improve their identification by hearing impaired listeners

Abnormalities in the cochlear function usually cause broadening of the auditory filters which reduces the speech intelligibility. An attempt to apply a spectral enhancement algorithm has been undertaken to improve the identification of Polish vowels by subjects with cochlear-based hearing-impairment. The identification scores of natural (unprocessed) vowels and spectrally enhanced (processed) vowels has been measured for hearing-impaired subjects. It has been found that spectral enhancement improves vowel scores by about 10% for those subjects, however, a wide variation in individual performance among subjects has been observed. The overall vowels identification scores obtained were 85% for natural vowels and 96% for spectrally enhanced vowels.     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

低温固体界面间接触导热“hysteresis”现象的研究

文中以强化低温固体界面间的接触导热为出发点 ,实验测定了低温环境下两种金属界面在过度加载前后的接触热导值 ,指出过度加载是一种经济有效的强化导热方法 ,对卸载过程接触热导率大于同次加载过程接触热导的“hysteresis”现象产生机理进行了分析     

Gain competition effect in dual-wavelength dye lasers

In this paper, we present a theoretical model for the gain competition in dual-wavelength dye lasers. For this purpose the rate equations under the steady-state conditions have been used. The degree of the gain competition is shown to depend on the polarization of the two laser beams. The dependence of the gain competition on various working parameters such as pumping power, dye concentration and the reorientation rate of the molecules or solvent viscosity is studied for two different cases of parallel and orthogonal polarizations. The results of our model show dramatically different behaviors in the two proposed cases.     

Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

Noncollinear optical parametric amplification in lithium triborate seeded by a cw Ti:sapphire laser

Experimental investigations of a type-I noncollinear phase-matched optical parametric amplification based on lithium triborate, which was pumped by a 5-ns second-harmonic pulses from a Q-switched Nd:YAG, seeded by a cw Ti:sapphire laser at 800 nm, was presented. The experiments generated 2-ns signal output pulses at 800 nm, the maximum signal output pulse energy reached 19 μJ, the corresponding parametric gain was 44 dB. Furthermore, the experiments demonstrate that the 65 nm-FWHM parametric fluorescence gain spectrum could also be observed. A quantitative account of the ultrabroadband parametric fluorescence gain spectrum was given with our theory. The experimental measurements are in agreement with theoretical calculations.     

Gradient- and Sensitivity-Enhanced TOCSY Experiments

A pulsed field gradient version of the sensitivity-enhanced 2D TOCSY experiment is proposed which yields high-quality spectra with improved sensitivity and a minimum of two scans pert₁increment. For rapid acquisition of 1D TOCSY spectra, the 1D DPFGSE–TOCSY experiment was modified to include phase-encoded multiple-selective excitation followed by a simple spectral editing. Combination of these two building blocks is used in a sensitivity-enhanced 2D analog of the 3D TOCSY–TOCSY experiment which provides an efficient tool for resolving severely overlapped signals of oligomers in short experimental time.